The Garage Door Screen is mounted (in front of the doorstop, one-inch wood strips) on the header and the doorjambs which the garage door is mounted to.

For single doors, as a general rule, add 2" in width and 2-1/2" in height to the nominal door size for single doors. For instance, a standard 3/0 x 6/8 door would require a 38" x 82-1/2" rough opening. Pairs would require twice the nominal door width plus 2" as well as an additional 1/2" if there is an astragal ( between them. For example, a standard pair of 3/0 x 6/8 doors with an astragal would require a 74-1/2" x 82-1/2" rough opening.

For all prehung units we REQUIRE that you provide us with your rough opening size. We will build the unit to fit the rough opening size that is provided. If this is for new construction, we normally add 2" to the height of the door and a total of 2" to the width of the door for a rough opening. This allows for the thickness of the jamb and leaves an extra 1/2? in width and height to square the unit.

This is not a feature of AiOS - it's from Firefox itself. Do the following to enable/disable this feature: Open the AiOS options dialog, choose Misc. > Extensions or Misc. > Themes in Fx 1.5 or Panels > Add-ons in Fx 2.x. Make sure you enabled the advanced options mode in AiOS. Check these setting by clicking on the settings buttons at the bottom of the dialog and tick the option Advanced Mode. Type in the text field the language acronyms of your choice as a comma-separated list.

Yes, the screen frame is offset to compensate for this. The adjusting screws for the screen wheels need to be facing the interior of the house. If the screen is installed‘backwards’ then the handle hits the patio door.

No. All that is needed is 1 inch on the top and 1 inch on each side for mounting . Our screens have 1 inch of hook fastener double stitched across the top and on both sides. If your opening is substantially shorter or narrower, you may have to add wood to you door framing, however, this is seldom needed.

Our Roll-Up Doors are attached to the wood guide rails which are part of the door package, and require support of vertical walls.

This is the width of the space that an overhead door will need to cover. If you provide us with the TODCO serial number, we have the opening width of your door on file. If the serial number is not available, please provide the actual measurements of the width of your trailer, from the left inside wall to the right inside wall (post to post), along with the name of the manufacturer of your truck body or trailer, and the year it was made.

This is the height of the space that an overhead door will need to cover. If you provide us with the TODCO serial number, we have the opening height of your door on file. If the serial number is not available, please provide us with two actual measurements: 1) the height of your trailer, from the inside floor to the inside ceiling, and 2) the distance from the inside floor sill to the underside of the header.

For standard size new construction windows, usually 1 " under the nominal size of the window, which will allow 1/4" clearance all around. For example, for a 4030 XO window, make the RO 47" X 35". If you order a custom sized (heel dimension must be stated) window, the window will be the heel dimension ordered, so you will need to make the rough opening that size PLUS whatever clearance you wish, usually 1/4" all around.

The same size as your door. The door fits against the opening from the inside. The opening should be finished with an exterior perimeter seal or stop molding to seal against the elements.

A - You should make sure your toes do not touch the end of the skate. You should still be able to wiggle them. Also make sure your heel does not raise up in the boot and make sure the sides of your feet are comfortable and not being pinched. A - You shouldn't buy skates that are too big for anybody, especially a beginner as it will hamper their skating ability and may cause injury. Figure Skates, Ice Skates & Roller SkateDiscountSkatewear.com has a huge variety of Skates at Discount prices.

We've got you all sized up! Check out our options for finding the best sized hat for your head which helps you find both 1/8 sizing and your best bet for S, M, L, and XL. Visit our Guide to Finding the Right Hat Size section to read a handy chart that converts inches to hat sizes, both True Fit (1/8 hat size) and Easy Fit (S, M, L, and XL).

To achieve a single access door you would require an odd number of panels to stack in one direction i.e. 3, 5 or 7, etc or to split the stacking to both sides in order to achieve an odd number configuration to at least on side, i.e. 2:1, 5:1, 5:3 etc. To achieve a French door opening, you would require an odd number configuration to both sides, i.e. 1:3, 3:3, 7:3, etc.

The opening on the small door measures 5" by 7", medium is 8" by 11", and large is 10" by 15". The rise is the area the pet needs to step over to go through the door. The rise on the small and medium door is 2" and the large has a 9" rise.

They are 13cm (5.25"). The "multi-fit" design speakers should fit without any work to the mounting, although new connectors on the original speakers cables are apparently required.

This depends on the type of fireplace you own, masonry, exact fireplace opening size (the height and width), as well as the type of facing, pre-fab or zero clearance. We would also need to know the manufacturer and model number.

Our measurements are given in stem thickness first followed by internal diameter/length eg.: 1.6 x 12mm. Our rings are always measured internally. Straight and curved barbells are always measured between the balls. On curved barbells (eg., belly bars) measure the shortest distance between the balls along the inside of the curve. Inches to millimeters conversion (you my need to round up or down to the nearest whole mm as necessary):

Our standard sizes are in 18-inch (45cm) increments. They are 18, 36, 54, & 72 inches (45, 90, 137, 182 cm). The 72" size works well on full size trucks. The 54" unit was designed for compact trucks like the Dodge Dakota, Chevy Blazer, Toyota's, and Nissan's. The 36" Power Bar fits most aircraft tugs. We can build them any size up to 24 feet (7.2 m). Measure the vehicles or equipment you need them on, and call or e-mail us for details.

There are no official height restrictions, but we do ask that you be cautious with materials that could be potential fire hazards or damage University of Illinois facilities including floors and walls. Any fabric used in your display should be treated with a fire retardant. We cannot accommodate exhibits wider than the designated 8’ width, unless you have more than one booth space reserved.