The only fuel additive that Indmar recommends is the use of Sta-Bil Fuel Stabilizer. Stabilization of fuel is required during off-season storage. We also recommend the regular use of Sta-Bil for boaters who don?t regularly burn a tank of fuel every week or two.

MPG-CAP? is not a fuel additive. It creates a micro-thin coating on the combustion chamber in your engine allowing your fuel to burn more efficiently.

Modern ultrasonic cleaning solutions are compounded from a variety of detergents, wetting agents and other reactive components. A large variety of excellent formulations are available, designed for specific applications. Proper selection is crucial for acceptable cleaning activity and to preclude undesirable reactivity with the part being cleaned.

Yes. It has been proven that the Tadger will complement any type of additive or bio-diesel. The Tadgers' performance is enhanced as the quality of the fuel is enhanced.

We do not recommend the use of Windex product on computer screens or our LCD films. We of course offer cleaners on our web site. The ones I would recommend is the Photodon Ultra and the Optix, both are available separately or in kits with microfiber cloths. The lighting in most offices is much brighter than it needs to be, especially with computers," producing glare and eye-strain, says James LaMotte, a professor of optometry at the Southern California College of Optometry.

Modern engine oils and fuels are carefully formulated to offer the best possible performance over a wide range of operating condition. There are occasions where an additive not contained in the oil or fuel will improve performance in one respect or another. However, there are also additives that will cause harm to the system. If aftermarket additives are used they should be thoroughly tested and offer more proof of performance than simple testimonial letters or anecdotal evidence.

Given the fact that literally thousands of fuel additives are offered on the market, engine manufacturers have no way of monitoring or testing the claims of so many products - making it difficult to determine specific products that are safe to use. However, PRI chemistry does not alter any fuel specifications issued by engine manufacturers - specifications by which manufacturers judge whether or not a particular fuel affects safe engine operation.

A mild soap cleaner, with no abrasives. Do not use any silicone based or ammonia products or it will cloud the surface over time.

Soap and water. In daycare settings, states require disinfectant solution. According to the CDC (Center for Disease Control) the best general disinfectant is ? cup chlorine bleach to 1 gallon of water.

A 99.9% of the time, the answer is NO. Todays injectors can be ruined by adding fuel injector cleaners and other gas additives to your fuel. When fuel injection first came out injectors did have problems with internal buildup causing driveability problems. Today injectors are almost 100% self cleaning. They have a coating on them that nothing can cling to, but the coating can be removed with fuel injector cleaners and gas additives. Also, octane boosters and gas additives don't fix a problem.

We recommend normal "washing up" liquid and water applied with either a sponge or kitchen paper. All the items can be washed in a dishwasher. No you do not need to use these cleaning materials. Most of these cleaning materials can be harmful to the environment and are not very nice when breathed in by you when cleaning the oven. You only need to use normal soap and water to clean our non stick materials!

It can be used in conjunction with other Rapid Set® Concrete Pharmacy® items or certain approved additives.

IPA (isopropyl alcohol) is generally recommended unless the substrate manufacturer states that there is an incompatability. Caution: many cleaning agents can leave a residue that either prevents vinyl adhesion or attacks the vinyl adhesive.

No, using alcohol or ammonia - based cleaners repeatedly may cause permanent damage to the LCD. Over time using these types of cleaners could cause the surface of the screen to yellow. It can also make the screen brittle and eventually cause cracking on the screen surface.

F2-21 is the only commercially available fuel additive based on the extremely powerful micro-emulsion technology. It is also the only multi-functional fuel additive on the market that works as a combustion enhancer AND combustion chamber cleaner. While other additives on the market are primarily designed to correct specific problems, F2-21 improves overall engine performance, whether it's old or new.

Most fuel additives are ok to run in your fuel cell if they are not left in the cell for extended periods of time. If left in the cell for a long period of time, the additives can separate from the fuel and attack the bladder. If you are going to use additives, use them only when necessary and refill your cell with regular fuel before storing.