For an extra charge (see Lacquer Finish option on product page ) we will be happy to apply a lacquer finish to any stained CUBE, or CASTER BASE you order.

Ultimately the decision is yours. We believe all wood should be stained because it seals better & enhances its beauty. Stain is an upgrade and does cost more. If your decor supports a natural finish, we will be happy to accommodate you.

Always start with a light or medium formula when you try a new brand. Light/medium/dark varies considerably from product to product. In general, the department store brand dark is heavier than the drugstore brand dark. And don't forget that two applications of a light or medium formula may give you better results than one application of dark.

We recommend lacquer because it is the best finish we have found for our products. The lacquer protects the wood from moisture, and at the same time penetrates into the surface, bringing out the natural beauty of the wood...lacquer makes the wood "come alive" (not to sound too corny, but it's true). The lacquer also provides a semi-glossy surface that is easy to clean, and looks great.

While I can't guarantee all those things, I will do my best at making recommendations and steer you in the right direction if you need some help picking out parts and materials. Keep in mind that what we build are custom basses and the bass you order will end up sounding how it ends up sounding. I use the best materials I can find. If you're putting the good stuff into a bass build it only makes sense that bass will end up sounding great.

Our products are not stained...color is the true wood. Older stock has a diluted watco finish, new product is dipped in Weiman LemonOil for Wood, does not clog pores of wood. The Accessory Bar is a Peg Bar, not intended for earrings, only necklace,bracelet, other larger open ended danglings, such as keyrings etc. Hi I am interested in a rack for necklaces -- one that hangs on the wall. The rack is for my daughter whose lease prohibits the drilling of any holes.

Clears with no pigmentation do not offer UV protection or color retention. Our products contain Transparent Iron Oxide pigments which absorb UV radiation while allowing visible light to pass through. This results in a finish that highlights the natural beauty of the wood while still protecting it. This is usually caused by oversaturation of UV Plus for Hardwood Decks on the wood. Remember, the product must be able to penetrate completely to work properly.

The clear coat finish gives your vehicle a "showroom shine" and protects the base coat from damage. ECO advises you to regularly clean and condition your vehicle's clear coat finish to ensure ultimate protection and luster.

The best way to protect your vehicle's clear coat is to visit one of ECO's many locations on a regular basis. Regular application of our Double Clear Coat Sealant creates a barrier that helps protect your vehicle's finish from harmful UV rays and airborne contaminants, as well as acids, tree saps, bugs, and bird droppings...All of which cause damage to your vehicle's factory clear coat. Our protective sealant lasts up to 30 days on your vehicle's finish.

The clear braces themselves don't stain, but the clear alastic ties sometimes stain with the use of nicotine and coffee products. These alastic ties are changed at every visit.

All natural stones are porous materials and therefore, are subject to staining if not maintained properly. In granite, the same porosity that allows for staining also allows for easy stain removal. In most cases, stains can be prevented by quickly wiping the spill. If a spill is left overnight, especially if the liquid is grease, oil, coffee, or wine the granite will usually darken. To remove the stain, a poultice should be applied, which may pull out the stain from the granite.

When using Sophisticated Finishes Iron Metallic Surfacer and Rust Antiquing Solution, you can control the look of the rust. The longer you let the final coat of Iron Metallic Surfacer dry, the darker the rust color will be, approximately 30 minutes for a light orange red rust, 12-24 hours for a deep red brown rust. If you are using Rust Antiquing Solution directly on a rustable metal, you cannot control the color of the rust. It just reacts naturally to the metal.

We're more than happy to answer your question with an amount of detail we hope will clearly clarify this issue for you. Any modern day finish (within the last 10 plus years) should NOT have any form of plastic set on it for any length of time. Current finishes have chemical properties in them that can actually mix with the chemical composition of plastics (such as a plastic table cloth), causing what is called "plasticizer migration.

Although traditional wisdom has it that French polish is more conducive to sound, hence is better, the issue really isn't that clear. More to the point, the question is how hard and thick the finish is, especially on the top. Although thick, hard finishes will dampen sound, lacquer may be applied just as thinly as French polish, and if properly applied seems to work just as well. There are other considerations as well that should be kept in mind.

Clears do not provide color retention. They fail quickly and the wood underneath will gray. We have shaded our clear topcoats with transparent iron oxide pigments to provide extended color retention and protection for the wood, yet maintain a clear natural appearance.

Not always but follow general guidelines for high traffic applications. Special Effects Clear Coat may be used, but may dull the color-shift appearance.

Many homeowners like the look of their newly stacked log home and want to keep it looking just like the day it was erected. If your desire is for a "clear stain," your best choice is a stain color that most closely matches the color of your wood. It will stabilize color and far outlast any clear finish. The reality is that in manufacturing the log home, you have removed all of the natural defenses that trees have. Since they are no longer living, the sap and resins no longer nourish the fibers.