Yes, but only Prolific based devices connected to an uhci controller are supported (ohci and ehci are not supported). this time, there are no secure USB commands to transfer data to or from a USB mass storage device. If you are concerned about USB security, please add the following lines to the file /etc/system exclude: drv/scsa2usb

Solaris supports Digi InsideOut Networks' devices and recently, KeySpan and Prolific chipset based devices' support were also integrated to Solaris. Keyspan and Prolific USB serial drivers are available in Solaris Express dated 2/2006 and in Solaris 10 Update 2 and later. PL2303 chip based adapters and Keyspan USA-19HS adapter are available as part of Solaris 10 Update 2. Keyspan USA-49WLC adapter is supported in Solaris Express dated 3/2006 and will be available in Solaris 10 update 3.

Connecting the digitizer with Serial (RS232) or USB will be determined by the application software you are using with the digitizer. Please consult your application support for assistance.

Before inserting your USB memory stick, please log in to the machine directly (not via SSH from another system). Logging in at the console will ensure that the USB memory device is mounted with you as the owner. It is safest to insert the device into one of the USB ports on the front of the computer (rather than those on the back or on the keyboard).

Yes. A separate, Keyspan brand USB adapter can be purchased for your board. The adapter attaches to the end of the serial cable provided and then connects to your computer. The USB adapter can be purchased through GTCO or your local reseller.

First, make sure you do not have a keyboard and monitor plugged in. OBP will use the monitor for output by default if either are plugged in. You will need a null modem cable or a regular serial cable with a null modem adapter to be able to view output. Below is a list of commonly used programs for viewing a serial console. Check to see if your serial console application has the ability to send a break, as it can be very useful on a SPARC.

A serial console is a device which allows command-line (like telnet/ssh) access to your server over a serial port. This allows you to access and fix your server if a network/firewall setting is remotely misconfigured. More importanly you can remotely boot into single user, change kernel image or options, and see all the messages sent to the console at boot.

The exact error message looks like Could not find USB device (vendor 0x0000, product 0x0000). Make sure this device is connected to the computer You have to set up the permissions on your USB device correctly. See Section 4.3, "Setting up permissions for USB ports".

Sorry, no. Today's PDAs do not host devices. They can only be slaves. Since our product requires a host, a USB adaptor won't work either. Currently we have no version that doesn't require a host.

Quatech has implemented a Low-Latency mode on all USB 2 devices. This setting can be found on the USB Serial Ports Advanced Options tab of the device manager. Each port can be set individually.

AutoEnginuity has verified our product with dozens of USB-to-Serial adaptors (IO Gear, Prolific, Belkin, etc.). This adaptor can also be purchased from us. Note: Not all USB-to-Serial adaptors are made equal. We have tried some based on the FDTI chipset (Cables Unlimited), KeySpan, the "<10$ eBay unit", and Radio Shack are NOT compatible. We highly recommend getting any of the above or anything based on the Prolific-chipset from a reputable company.

NT4 does not have usb support, and we recommend our users to use either Win 98 or Win 2000. We can offer support for NT4 only for large customers under special conditions for our devices- including usb to serial or parallel.

You can go 5 meters or around 16 feet from a computers USB port or from a powered USB hub to a USB device. Back To Questions

The requirement is similar to that of USB 1.1, but all components will have to be USB 2.0 compliant. A successful USB...

Windows 98 default supports only USB 1.1. Install a USB 2.0 PCI adapter then USB 2.0 device still can work fine in Windows 98. Some device such as Micronet´s USB 2.0 adapter, it includes a USB 2.0 driver written by third party so it can work in Windows 98SE.

Wire up a serial cable from the Sun's serial cable to one of the PC serial ports. PC serial ports are usually (but not always) DB9 (9-pin), while Sun serial console ports are usually (but not always) 25-pin (DB25). You generally need to connect them through a "null modem adapter". For more information on serial ports, see Sunhelp's UNIX serial port resources page, at http://www.sunhelp.

Not only will it not work, you may damage your device. In order for a device to work with USB it must be compatible and have appropriate drivers. Some early releases of the Freestyle Pro and Precision Pro were not USB compatible; if it did not come with an adapter you are out of luck.

The exact message looks like *** Error ('Could not claim the USB device') *** Could not claim interface 0 (Operation not permitted). Make sure no other program or kernel module (e.g. dc2xx or stv680) is using the device and you have read/write access to the device. You have to make sure that no such kernel module is loaded and that you have set up the permissions on your USB device correctly, such that you have (non-root) write access to the camera device.

the present time, we do not support any of the serial-to-USB adapters on the market due to major variance in their compatibility. There are a few Serial Amazing Box users that have used an adapter successfully, but it is a hit-or-miss guessing game as to which adapter will work with your particular computer’s configuration.

The USB specification allows for up to 127 USB peripheral devices to be used in a single system. Quatech 1-8 port adapters require one USB port, 16-port adapters require two USB ports. Thus, by using a series of hubs, up to 127 Quatech 8-port adapters or 63 16-port adapters can be used. This means that (using 127 eight port adapters) a single USB port can be used to connect 1016 serial devices.