Plug an ISA Multi-IO card, connect your floppy drive there, and flash your BIOS again, this time with one that really is for your motherboard.

Turn the PC on and immediately start tapping the DELETE or DEL key. Keep tapping this (approx 2/3 times a second will suffice) until a menu appears. This is the BIOS. Use the LEFT/RIGHT arrow keys on the keyboard to move along the upper menu until you highlight BOOT. The boot device list will appear (There may be a pause before this list appears) Press the + (Plus symbol) on the keypad (far right on keyboard) to move the ATAPI CD-ROM or floppy disk heading up the list. See similar questions...

Unless you are trying to improve some functions or solve some problems, you do not need to update your BIOS. If it's not broken, don't fix it. - Go to Top See similar questions...

If you do not have a regular 3.5" 1.44MB floppy drive installed, then go into the BIOS, Standard CMOS Setup, and set "Floppy Drive A:" to Not Installed. Next, also in Standard CMOS Setup, you need to set the drive type to FLOPTICAL. For example, if the LS-120 drive is installed on the secondary IDE channel as a slave device, then set the Sec Slave option in the BIOS to FLOPTICAL. See similar questions...

Sure. You need to add "flags 0x20" at the end of the fd* entry and recompile your kernel. The line should be read: fd* at fdc? drive ? flags 0x20 After that you would be able to use the floppy drive all the times. It doesn't matter if you plugged it in after boot. For most people, you won't have to do anything here. It will automatically boot if no commands are given. But sometimes problems arise, or special functions are needed. That's where these options will come in handy. See similar questions...

Because it doesn't work yet. RedSquirrel is a Win32 application and as such is restricted to using the Win32 API. Windows doesn't support anything other than 512byte blocks on floppy/hard disks and Acorn disks use 1024 byte blocks. There are two ways around this, neither are pretty and neither work under Windows 2000. I had a half hearted attempt at writing a VXD to give me bios access but it hasn't been entirely successful. I will try again soon. See similar questions...

Keepoint 7 allows you to Export webpage to an external device or a specified location on your hard drive. Click on the Export option and then specify or browse though to a specific location on your PC where you want your data to be saved. See similar questions...

Yes. USB flash drives can be plugged into the socket on the right side of the Mac after you have logged in. You may have to unplug the headphones to do this — please be sure to plug them back in when you are done. When you are finished with the USB drive, be sure to drag its icon to the trash icon on the Dock before you unplug it or you may risk damaging your data. See similar questions...

If you have a IDE Zip® or Jaz® drive installed, remove it and try again. The boot floppy can get confused by the drives. After the system is installed you can reconnect the drive. Hopefully this will be fixed in a later release. See similar questions...

A floppy disk drive is an economical, removable storage medium. It uses a magnetic disk. You can record or erase it and then remove it from the computer. You can use the removable disk repeatedly. Today's floppy is 3.5 inches of square, stiff plastic with a magnetic disk inside. It is called a floppy because the original disk, way back when, was large and floppy like a hound dog's ear. The term "floppy" is still with us. See similar questions...

Laptops can receive a lot of abuse and their hard drives can get damaged. You may need laptop data recovery supports if: See similar questions...

I got this working on a 256M Sandisk Cruzer Mini, but the procedure should be the same for any USB drive. I used a Linux machine to prep the drive. You can probably use a Windows machine to do all of this stuff; if you figure it out, feel free to let us know and we will update these instructions. First, I needed to repartition and reformat the drive, because the original partition table was an unholy mess which confused the boot loader. See similar questions...

This is a conflict between some system BIOSes and the SanDisk Cruzer Micro flash drive. It is not related to the busTRACE software. If your system exhibits this problem, the system might appear to hang during Windows boot when you have our dongle (i.e. SanDisk Cruzer Micro) installed in a USB port. If you remove the dongle, the system continues to boot just fine. You can plug the dongle back in and everything works fine. See similar questions...

You may also install via hard disk and initrd. You need a big enough hard disk to do this (and it takes a little bit more time than the usual method). The following method presumes that it is possible to access the disk using DOS. Leave a small DOS partition (with enough spare space to hold the tar files from a few install disks). The bigger that partition is, the less come and goes from DOS are needed later. However, the bigger it is, the less space is available for Linux itself. See similar questions...

The solution is simple. Just get Recover Fixed/Floppy Disk v2.2. It has a special switch to supply Boot Record thereby making DOS to work on the floppy as good as on a good one with a good Boot sector. See similar questions...