First check all the wire connections at both ends of the mic cable. Next be sure to set the PAGING INPUT MIC/LINE switches correctly. Facing the rear panel, MIC position is to the left. Once you have the setting correct turn up --- clockwise --- the PAGING TRIM control and see if you can light the PAGING OVERLOAD indicator. If it illuminates, you're getting hot enough audio into the paging preamplifier.

Volume pedals must be connected at the INSERT points on the AP 13. You cannot connect and instrument to a volume pedal and then plug the pedal into the AP 13, since the pedal will not pass phantom power and the impedance mismatch may also cause problems.

The hall sensor got pushed (bent) and is now too far from the magnet. Look for a small black plastic device --- about 1/8" square --- just below the rods at each end of the fader, mounted on the circuit board. It needs to be perpendicular to the PCB. If the sensor has been "bumped" during cleaning / lubrication, then it will not be close enough for the magnet to "turn off" the fader completely, resulting in bleed.

The NIGHT SCENE and NIGHT+PORTRAIT Scenes are meant to take time exposures of skylines and city streets by leaving the shutter open for several seconds. Therefore, it is necessary to stabilize the camera by bracing it against something solid or – ideally – by using a tripod or camera clamp.

The most likely cause is that the TK send facility does not work for you because of Xauthority issues. See FAQ 4a & 4b. If you cannot get send working, you have two options. First, disable the background process so that all periodic activity is done in the front-end. Do this via the preferences entry for Background Processing. Another cause that might disable inc completely is lack of the MAILDROP environment variable.

make sure all IPs on both the management and firewall are resolvable to a hostname within the system's local host file and that the systems are configured to look at the local hosts file before looking to DNS. I had 10 FW Modules (4.0 SP2 on AIX) that could neither fetch the FW rule base NOR log to the Management Module. I received an authentication error for both. However, the Management Module (4.0 SP2 on Solaris 2.6) CAN push the rule base onto the Firewall Modules.

Your browser must accept cookies. You personal settings, including your access details, are stored in a cookie on your computer. You can turn cookies on and off, or even delete them. For most browsers, you will find this function under 'Settings'. To gain access to the full functionality of the image database, you must activate cookies in your web browser. When you have done this, relaunch your browser.

Passwords are case sensitive. Be sure to enter you user id and password exactly as you did during the orientation. If you are enrolled in more than one WebCT class you must remember that your WebCT password is the same for all classes. If you change it in one class it will be changed for all classes.

Maybe our server is down. We try our best to provide 24/7 access, achieving an uptime of 99% so far. Check the online and members number on our homepage. If one of the numbers does not appear, then our server is down. Try later! Make sure you typed your password and username correctly. Passwords and usernames are case sencitive! Make sure you have downloaded the latest client.

In iSilo's document list view (when seeing all your iSilo references such as when you click the X in the lower left hand corner of ICDMeister), click the iSilo label at the top of the screen. Once doing this you should no longer be asked to re-enter the registration code. If this doesn't resolve the issue, please contact us for additional assistance. The document list view in iSilo is the one showing your list of iSilo documents.

Paging Occasion = {(IMSI div K) mod (DRX cycle length div PBP)} * PBP + n * DRX cycle length + Frame Offset Where n = 0,1,2... as long as SFN is below its maximum value. In FDD mode, Np = (18,36,72,144) is the number of Page Indicators per frame, and is given in IE "Number of PI per frame", part of system information in FDD mode.' FDD) Chapter 5.3.3.10 shows how Pq is calculated for channel mapping, the structure of paging indicator channel and the mapping of paging indicators Pq to PICH bits.

Your username and password are case-sensitive. That means that our system recognizes capital letters and small letters as different characters. If your username or password is "JONES", but you're typing "Jones", you won't be able to login. Your username and password must be entered in the same case (upper or lower) that you used to create them. Also check if the "CAPS-LOCK" light on your keyboard is on. This can also affect whether the information is entered in the right case.

The most probably thing you have is items with different height So, if your application is using ItemHeight, CellSingleLine, or other properties or methods that may change the item's height you need to set the ScrollBySingleLine property on True. By default, the ScrollBySingleLine property is False. In the first case you need to call test List1.Object, in the second or third option you may call test List1.

First, make sure you're logged in. Watching videos is one of the benefits of a free hearitfirst.com membership. If you're still having problems it's possible you need to update your media player. For the latest, download at www.windowsmedia.com or www.real.com. We screen all submitted photos for content so it's possible we haven't had a chance to upload yours yet. If it's been a while, check in with us at info@hearitfirst.com to make sure we've received it.

You may be asked to enter your details in the following format: "name" or "date of Birth" etc. Please note that when entering your details it is not necessary to use quotation marks as using them will mean you will be unable to access the site.