There are many types of synthetic (manufactured) logs on the market. You need to carefully read the instructions on the packaging. Those instructions should clearly mention whether the logs are approved for use in a fireplace (freestanding stove, zero clearance fireplace, or fireplace insert). If there is no restriction mentioned on the packaging, try to contact the log manufacturer. Some types of synthetic logs are forbidden for use in freestanding stoves.

We recommend not moving the logs. Placement of the logs is critical to the operation and performance of the fireplace. Misarranged logs can result in operational problems. If you notice the logs have been moved during cleaning, contact a service person or check your installation and operating instructions for proper placement.

Proper sizing is determined by the size of the fireplace base and the overall size of the Gas Log and Hearth Kit, which requires measuring the front width, back width, depth and height of the fireplace. Getting logs or controls too tight to the sides can cause heat issues on the fireplaces and gas logs controls.

instant, roaring fire with no logs to lug or mess to clean up is what makes gas logs a joy to own without polluting the air like a wood burning fire.

Hoods are designed to deflect heat from wood such as a mantel. Check the installation instructions for your log sets to see if the mantel height requires you to install a hood.

Gas log sets are designed to be installed into an existing fireplace, while gas fireplaces are self-contained units. Gas log sets are significantly less expensive but are considered a decorative appliance because they provide less heat.

No respectable loggers will display any messages with the keyword "nolog". Since many logs are publically accessible to any Web user, you may wish to use this if you are mocking your employer. Long, long ago, embedding the string JJ-232 had the same effect, but it is no longer nearly as widely supported as /nolog. Bear in mind that nolog is not a real guarantee that your information will stay private.

These are the only times fires are permitted. An additional cleaning fee of $100 will be charged if fireplaces are used at any other times. We do provide the firewood but not the kindling, starter logs, or matches.

Tufoil mixes with all synthetic and mineral oils used in automotive engines! If in doubt, you can check compatibility by warming 1 ounce of Tufoil and 10 ounces of any oil and leave for 24 hours. If there is no settling, it is compatible.

No, they must always be used in a fireplace with a chimney or escape provided by some kind of operable venting. FC's logs are called "vented" gas logs and are approved for all wood-burning fireplaces.

The EP-SEL electric logs and EP-SH electric log heaters typically ship within 4-7 business days. During times of high demand (i.e. holidays) we schedule them for delivery within 3.5 to 5 weeks of placing the order. Electric fireplaces are of the highest quality, are made to order, and ship within 8-12 weeks (2-3 months). All our fireplaces are shipped with our "front door delivery" for FREE (a $450 value). Our freight line will deliver your fireplace right to your front door.

No problem. Within 30 days of receipt of your shipment you may return your order. You must return products in original packaging with all product information and instructions. If product could not be re-packaged and re-sold, it will not be accepted. We will issue a full refund for the price of any item you return that meets these conditions, less the 20% restocking fee and any shipping. Returned goods should be shipped prepaid to the shipping address we specify to you at the time of return.

Vent-free gas log sets can be installed in most masonry fireplaces, as long as the set's clearance and ventilation requirements are met. For installation in prefabricated fireplaces or fireboxes, follow the fireplace manufacturer's recommendations, as well as meeting the set's clearance and ventilation requirements. Refer to the log set's owner's manual to determine clearances and unconfined space requirements.

Both, depending on the budget and preference of the owner. For years we have built with both dry and green logs. In those years, green logs offered us close to, but not quite absolute perfection. Dry logs were better than green at that time. Over the years, we have tweaked our green log fitting systems, until we were able to offer a construction system that offers tight wood on wood joinery, after drying and settling is completed, using green logs.

Yes, our Fire Rated Version of our paneling and siding can go around your fire box opening. Make sure you select "yes" on the "Firerated" drop down box.

Lamartine cannot recommend the use of any one type of solid fuel for coal fires. Due to the introduction of "petro-chemical" fuel with a high pep coke content, we have discovered that these fuels can cause serious damage to fireplaces, firebacks, baskets and hearths. These solid fuels can burn at extremely high temperatures, which no fireplace material at the moment can withstand. Please consult your local coal merchant for the correct fuel to use.

Solution : This is normal when your fireplace is new and has never been used. The paint needs to be 'cured'. You need to heat your fireplace two or three of times before the curing process is completed. Simply open a window in the room where the fireplace is located. The amount of smoke produced by the curing process should be very limited. The chimney in under negative pressure.

The Fire Rock system is ideal for outdoor application. One of the tests performed in the U. L. certification is a freeze-thaw test. So not only will the Fire Rock system not deteriorate due to freezing and thawing. More importantly, a masonry structure obviously will not rust when exposed to the outdoor elements.

Unfortunately no, the Ecofan generates its own electricity through temperature differential. The base must make contact with a heat source of at least 65ºC (150ºF) and the top of the fan must remain cooler. The Ecofan needs to draw cooler air from behind in order to operate.

For peptides with less than 50 amino acids, we use chemical method to do the synthesis. For peptides with more than 50 amino acids, we use custom recombinant method.