Unlike DSL or Cable Modem, our service does not depend on telephone or cable TV infrastructure. This enables Phoenix Internet to reach many neighborhoods where DSL and Cable Modem are unable or unwilling to go. Our service plans offer performance comparable to DSL and Cable Modem, but with some important differences. Superior customer service because we are a local company and can be at your location within hours if necessary.

A cell phone wireless modem is an accessory used to connect a cell phone or other portable device such as a PDA or laptop to the internet without annoying wires to make a "hard" connection point.

No. The Navini modem is specifically designed for the Navini wireless network as implemented by Unwired.

The cable TV system plant dedicates a standard cable TV channel for data transfer of Internet and multimedia services. A computer equipped with a SURFboard cable modem is then connected to the cable TV system network using the same type of hook-up used for a television. The SURFboard cable modem receives information carried over the cable TV network and passes it through to the computer via USB or a standard 10/100Base-T Ethernet interface.

Verizon, Cingular, Sprint, T-Mobile, Alltell, Virgin, Suncom, Amp'd, Midwest, Cellular South and nTelos.

Yes, but Capitol Broadband can not guarantee the level of service when using equipment not recommended by us.

c) Check the IP address captured. Go to Start > Run > type cmd (Win2K/XP) or command (Win98/Me) > in the dos prompt type ipconfig to check your computer’s IP, it should be in the same subnet as the router. I was able to ping the IP of the router, but I was not able to access the web configuration page 192.168.1.254 For Internet Explorer, click Tools, Internet Options, and then the Connections tab. Make sure that Internet Explorer is set to Never dial a connection.

Have a USB port available. (A USB or Universal Serial Bus port is a connection on the computer usually used to connect cameras, joysticks and sometimes mice and keyboards. It is standard equipment on computers less than about 2 years old). Have a processor speed 200mhz or greater. (The faster the computer, the better it can utilize the speed of the wireless internet).

We'll try and help you over the phone with basic software issues that might prevent Internet access, but if we determine the problem is hardware related or related to major software problems with your Windows system (caused by corrupt or missing files, viruses or hardware driver conflicts) we may recommend taking your PC to a computer repair center. For reasonably priced repairs, we generally recommend the Sylvan Information Services office in Warsaw which you can find on our locations page.

First, check to see if your modem is a supported device. Double-check the Hardware Compatibility List at http://hardware.redhat.com. Verify that your modem is being detected by the system and that it is not conflicting with other resources.

Answer: The file sizes in this system are quite large, so we do not recommend using a dial-up system for VOD.

Use 8 data bits, no parity and one stop bit (8-N-1 or N-8-1). For best results, set your communications program to a nominal speed somewhat higher than SCN's 33.6k bps modem speed, such as 38400 or 57600. If your phone line has call waiting, disable it first (include *70 in front of the telephone number.)

Most new computers are currently (late 1998) shipped with 56K modems that meet the new V.90 standard. This standard attempted to allow two very different kinds of 56K modems (X2 and K56flex) to communicate with each other at high speeds (see the FAQ "Why can't my 56K modem get a 56K connection?"). the same time, telephone lines and switching equipment is often not designed to accommodate high speed data transmission.

The 56K modems are digitally terminated, and transmissions don't have to be converted back to analog. This eliminates one analog loop, lowers noise levels, and allows the higher transmission rates. The K56flex modem achieves higher downstream speeds because digital signals are sent and received with very little noise. The upstream direction remains slower because a conversion must still be made at the client end.

On older Macs, the internal modem is a regular serial device. In addition to ppp support and i2c support, enable this kernel option to use it: Newer Macs use a USB device which only has a driver from Linuxant. Unless you have purchased a key from Linuxant, this driver will only work at 14.4 and will not support FAX. To install the driver, emerge net-dialin/hcfusbmodem which will provide /dev/ttySHCF0. Then set up ppp like usual.

Unfortunately the tones generated by the exchange to inform you that another call is coming in, will interfere with the modem communication, and may drop the connection. To get around this problem simply turn off Call Waiting on your phone before you dial out with your modem. To turn it off select the Modem device in the Control Panel. Then in the Dialing Properties add the command to turn off call waiting to your modem's dialing string by checking Disable Call Waiting.

Yes; the Accounts Centre system is designed to be extremely bandwidth-efficient, therefore, it has no large/heavy graphics, long periods of download or complicated operational plug-ins to install. Accounts Centre servers are linked directly to the Internet backbone with multiple, ultra-high-speed OC-3 and OC-12 connections. This minimizes the problems of Internet congestion that plague conventional Internet-based services.