Roller Doors can be painted however due to the nature of the roller door flexing around the roller drum, potential cracking of paint may occur. It is recommended you thoroughly clean your door with water and household detergent and rinsing thoroughly with clean water before painting. The door should be clean, rust free and smooth (light sanding may be required). Apply your selected water-based acrylic paint (e.g. Dulux Weathershield Roof Semi Gloss).

The paint warranty on our pre-painted steel roofs is 20 years against fading and 35 years against peeling.

It is possible to paint a steel garage door. Most come with baked-on paint which lasts a very long time, but if you don’t like the color or are trying to cover up damage, make sure you use latex paint. Oil paint will bubble and eventually peel off.

Yes, we can install roller doors in freestanding applications, either on the fenceline or across a driveway. We can arrange everything from installing the steel posts to the canopy. Refer to Roller Doors – Canopy for further information.

There are over 20 different colors to choose from and custom colors are available. (There may be a minimum order size required for custom colors, please contact a salesman for more details.)

Armstrong Garage Doors steel doors can be painted with any light quality exterior latex paint. Note: when painting a door do not use paint with LRV readings less than 56. Wood doors must be painted/stained prior to installation. Most models are available primed from our factory. Armstrong Garage Doors recommends wood doors be re-painted every 1 to 2 years (more frequent refinishing may be required in high moisture areas).

Airport Doors will make to measure any roller door up to the maximum door size. Standard industry Roller Door sizes include 2490mm (or 2430mm opening width), 2520mm (or 2460mm opening width), 2800mm (or 2740mm opening width), 3100mm (or 3040mm opening width) and 4900mm (4800mm opening width).

No, limewash must be applied with a limewash brush. Limewash brushes are large broom-like brushes that allow you to apply limewash with large broad strokes. BAUWERK carries a wide variety of quality brushes at discounted rates for internet shoppers.

Definitely! Here at Woodfold, we're all about choice, so you can specify that your door be either factory-finished with clear lacquer, custom paint or stain, or unfinished for field application of paint or stain. Should you select an unfinished door, however, extreme care should be taken to ensure that the individual slats are not stuck together with dried paint or stain. This will adversely affect door operation.

Proper lime paints need no paint stripping when redecorating an existing coat of lime paints. BAUWERK recommends that you free the surface from dust and grime by giving the surface a wash with cold mildly soapy water. Interesting effects can be achieved when the new coat of paint is not fully covering the existing one. Also, when redecorating over existing lime paint, usage of paint in most cases will be less, due to a greater coverage rate.

Yes, although we usually recommend that our kitchens are painted on site. Although, to give you a head start, we can carry out the priming and undercoating for you in the workshop at additional cost (pricing pages). If you you would like us to fully paint your kitchen for you then we can do this also.

Steel doors are low maintenance. Typically a wood door needs to be painted as frequently as the wood trim on your home due to weathering. Amarr steel doors are pre-painted and most are available in your choice of three colors. Wood doors are unfinished or primed, both of which need to be finish painted upon installation.

If there is no roof over the Roller Door canopies are recommended to provide weather protection for the roller door operator as well as the roller door itself.

In today's grandstand specifications painted steel is becoming more popular due to the authentic value of color. Is this better than galvanized steel? In our opinion, no. Galvanized steel is a maintenance free coating which has been used for decades. It provides the most cost efficient means of protecting the steel from rust and corrosions. Galvanizing steel is a metallurgical bonding process which gives a longer life cycle of the stadium than painted steel.

Yes, if your carport has enough opening height, headroom, sideroom, internal projection and has sturdy posts. Depending on the application some modifications to the carport may be required in order to fit the door, therefore it is recommended to seek garage door requirements before getting the carport permit.

Many homeowners feel that they have thrown their money away when their wooden garage doors rot or break-up because of moisture problems. Amarr guarantees its wood doors for one year, but a properly maintained wood door should provide a "reasonable" length of service to the homeowner. The following information on proper painting of wood doors comes from the American Hardboard Association.

Windsor Republic Door Models 724, 730, 735, 750, 755, 775 & 790 are prepainted and ready for years of worry-free beauty. If you wish to apply another color, please clean the surface with trisodium phosphate. Rinse the surface thoroughly and allow it to dry. Use high quality exterior latex (water based) paint and apply it with a brush. If you intend to paint your door, e-mail us for specific painting instructions at windsor@windsordoor.com.

All Overhead Door steel garage doors can be painted with the color of your choice by using latex paint.