Digis will install a single Ethernet jack inside your home. If you have more than 1 computer, you will need to purchase your own wireless router. A router acts as a splitter, allowing up to 4 computers to be plugged in directly, and it also wirelessly sends your Internet signal throughout your home to any computer or laptop with a wireless card. An 802.11g wireless router typically runs under $50, and can be purchase from any computer or office supply store, or Walmart.

Yes, because the DSL modem has an Ethernet 10 Base T interface. All you'll need is an inexpensive Ethernet hub or router and ethernet cable, which is available at most retail outlets, and you can connect all the computers in your home or office to the one DSL modem. Keep in mind that with additional computers on a hub, they will require additional IP addresses, which have an additional charge.

If you are using the multi-user service, you can connect up to 29 hosts to your DSL router with one or more Ethernet hubs. When using an Ethernet hub, you will need to connect one port to the DSL router; the other ports can each be used to connect to a PC. If you are using the single-user service, you will only be able to connect one PC directly to the ADSL modem/bridge.

Yes. You can connect multiple computers in your home to the same high-speed connection. However, if you need a separate IP address for the additional computers, then you will need to pay an extra fee in most cases. You can learn more about setting up a network in your home by talking to your service provider. Broadband Summary ? Glossary ? FAQ ? Order Retrieval ? Privacy ? Disclaimer ? Intel Home ? Terms of Use

es, you can install any type of internet sharing systems. We have found certain Wi-Fi home wireless systems do not work well with wireless Ethernet. We can provide you with a known workable solution for a small fee. We do restrict sharing of activity to be contained within a single residential home or office. If we discover that internet sharing is being used to allow other homes or businesses to have service, your service will be discontinued as outlined in the contract.

Yes, there will be no extra charge for this, but bear in mind that intensive use may cause the speed to suffer and you might want to upgrade to a faster package.

In Route mode, the MM2211 can allow multiple PCs to connect. Since the MM2211 only has a single Ethernet port, the user should connect a hub or a switch behind the MM2211 to accommodate multiple PCs.

Our Universal ST-nXm-U Matrix KVM Switch allows up to 4 users to individually command or simultaneously share up to 16 computers. These low-cost switches access PC, MAC and SUN computers without the need for plug-in modules. Our ST-nXm Matrix KVM switch allows up to 8 users to individually command or simultaneously share up to 32 computers. This switch accesses PC, MAC and SUN computers using plug-in modules with standard cables. Modules can be added or changed as needed.

Yes, multiple computers can use the same DSL line. Using a DSL router will allow you to connect virtually limitless numbers of computers to one DSL connection. This is perfect for businesses that need to connect an entire office to one DSL connection. Every worker can be online at the same time. Home networking is also growing as a direct result of broadband access. The world of the wired home is here now.

First the router needs to be upgraded to the latest firmware level. The manufacture web site will contain this information as well as information on how to install the firmware. The computers need to be running the latest version of SecuRemote. That version is SecuRemote NG AI. It can be downloaded from the ASU Security web site.

In addition to the hardware and software described above for each computer, you will need an Ethernet hub. The hub will be the central connection point for each computer, and the DSL modem, thus the hub you purchase will need enough ports for all of the computers you want to connect PLUS the DSL modem. TOP

Yes, as long as your ISP allows multiple IPs per customer, either by the use of a DHCP server or specific IP number leases.

You can have as many as you want. You just have to pay for them. The beauty is that you can have 100 users set up in A-Systems JobView®, but if only five are in A-Systems JobView® at a given time, you only need to have a five-user system. If you have 10 people in your office, but only one is in at a time, you do not need to buy any additional users. You automatically get multiple users. If you want multiple simultaneous access, that is what costs extra, but not that much extra.

Yes. We have made a couple of changes in the installer that will override the default permissions on Linux and other Unix systems. You and other users in your group should be able to run LimeWire. If you have installed LimeWire on Windows XP, but only have an icon on one user account, follow these instructions for each XP user:

Yes. ConnectSouth will supply one modem per DSL subscription. This modem typically supports up to four end users who connect directly into the modem. If you have more then four computers to be connected to the DSL line, you will need to connect your DSL modem to a mini-Ethernet hub, which will distribute the bandwidth over a LAN (local area network) and allow you to connect additional PCs.

Yes, multiple users in an office can use the same DSL line. In fact, DSL supports almost unlimited users. Some of our business customer are linking as many as 50 computers to a single DSL business line.