No, the USB port will support only one user. If you need to support multiple computers you need to use the Ethernet port and a hub/switch.

A USB hub typically consists of a single upstream port (designed to connect directly to your computer or to another hub) and multiple downstream ports. D-Link provides both 4-port (DSB-H4) and 7-port (DSB-7) models. It allows you to expand the number of devices you can attach to your computer.

Yes, as long as the hub uses an external power supply. We do not recommend or support this configuration. Before requesting help from Technical Support, please try connecting the device directly to the computer's USB port.

Yes- The phone should work properly when plugged into a USB hub. If experiencing problems with a vPhone using a USB hub, plug the vPhone directly into the computers USB port.

Yes, the OneTouch USB Cable can be used with a hub, rather than connected directly into a port on the computer. With the 9-pin serial cable, just plug it into your meter and the serial port (COM port) of your computer. You may need to restart your computer if another device had been using the serial port. With the OneTouch USB Cable, you must install a software driver before using it for the first time.

Halleck Undergraduate Bistro, also known as The HUB, is located adjacent to the Cafeteria in Halleck Student Center. The HUB offers students a relaxing atmosphere in which they can enjoy a variety of sandwiches, salads, beverages, snacks, "Sub Connection" subs, "Freshens" frozen fruit smoothies and ice creams, and "Pretzel Logic" gourmet soft pretzels.

The light does not come on when the card reader is plugged into the computer. It will only come on when a memory card is inserted into the reader.

Good question. According to the USB spec, software is required to connect not only to first tier devices, but also to any plugged into USB hubs. It appears that there is a bug in the Kodak Mounter and USB connection software causing it to fail unless the camera is "device #0", connected directly to the computer.

A USB hub has to re-calculate the time left before the next sof (end of the uframe); the small extra delay added by the hardware hub could make the transaction not handled as fast as a device directly connected to the host. If several devices are connected on the hub and working in parallel (for example, a webcam + a USB flash drive + a mouse), then the USB bandwidth is shared among the devices usage.

All webcams need to be plugged into a powered USB hub. If your USB hub is unpowered, you will not be able to run your webcam through it. You can also plug your webcam directly into a USB port on your computer. That'll work just dandy. Even though you have a secret code on your video, when somebody clicks on your broadcast name from the Channel Menu in the viewers, it will still show that your broadcast name has been clicked on.

When the Neo is connected to a DOWNSTREAM port of a powered USB hub, it will start charging. It will also be able to access all devices connected to the hub while charging. If you plug the Neo into an UPSTREAM port of any powered USB hub, you can access any (low-speed,full-speed) usb device on that hub but the NEO will not charge. This is because UPSTREAM ports on USB hubs are not powered.

Yes- The IP Phone Adaptor should work properly when plugged into a USB hub. If experiencing problems with a IP Phone Adaptor using a USB hub, plug the vPhone directly into the computers USB port.

However, USB hubs cannot pass the Mac's unique USB "power on" signal, and so you will not be able to use PowerKey Pro's unattended start up features with a hub.

No, the TrackerPod/PowerPod requires 500mA of current. Some hubs and computers may report over-current as this limit is approached. TrackerCam Software 3.4 or higher will detect this situation if it occurs, and will give you the option of ordering an external power supply from the manufacturer's website. I see in most photos that the tracker pod has two wires coming off of it, one from the camera & one from the pod.

No. The Hitch will recognize the hub connect to the first device it finds on the USB hub. If that device is unplugged from the hub, the Hitch will then search for another device connected to that hub, but will never connect to more than two devices at once. No. The Hitch is a bridge device, and contains no memory. This is an advantage because it cannot have any issues with storage, such as hard-disk failures or memory allocation errors. No.