The models listed below are able to accept the memory cards up to 64MB without any problems (bigger sizes may work but are not verified at this time). If your camera is not on the list please contact JVC at 800 252 5722

Insert the card into the card slot as shown. (The EVOLT E-500 supports xD-Picture Card media as well as CompactFlash? media.) Push the card gently straight in until it clicks.

SIM-card memory capacity is 16 Kbytes, cards with larger memory capacity are planned to be produced in future.

We have tested up to 8GB in size for memory cards with the OSD with working results. Using the OSD's USB connection, you can hook up external hard drives and expand your space to almost unlimited levels.

The ProMark2 has a total of 16 MB of on-board memory. 8 MB is dedicated to storage of the base map and cannot be modified. Of the remaining available 8 MB, up to 4 MB can be used for street maps and waypoints. Whatever part of the available 8 MB that is not occupied by street maps and waypoints can be used for storage of GPS raw data. Yes, with Ashtech Solutions v.2.6 or higher. An almanac file is also available from the FTP site at ftp://ftp.thalesnavigation.com/pub/almanacs.

NO!! Always use an official Nintendo GameCube Memory Card. The game does not support non-licensed memory cards, so your game may not be saved correctly, and sometimes you won't be able to keep playing the game.

We have standardized all of our scanners on a memory size of 4.2 megabytes. However, this question is usually asked to determine if our scanners can contain the client's entire master file (PLU, UPC, SKU, etc). The number of items that can be stored in the scanner's memory is dependent upon the client's specific requirements. First and foremost is the information that the client wishes to display to their associates during the inventory scanning.

No, you cannot use ECC SDRAM with the system board. Use only non-ECC SDRAM, otherwise you may get system memory errors with ECC SDRAM.

The amount of memory rdiff-backup uses should not depend much on the size of directories being processed. Keeping track of hard links may use up memory, so if you have, say, hundreds of thousands of files hard linked together, rdiff-backup may need tens of MB. If rdiff-backup seems to be leaking memory, it is probably because it is using an early version of librsync. librsync 0.9.5 leaks lots of memory. Later versions should not leak and are available from the librsync homepage.

Firmware versions later than about Q2 of 2004 fixed the compatibility problems that had previously been observed with "large" cards. The yahoogroups report success with 2GB cards without issue.

Mac computers and printers use a variety of memory, which is called "SIMMS" or "DIMMS" or "VRAM". Most of my memory is sold from a Mac Memory Web page. I provide some descriptions there of memory for most of the systems I sell, but not for the printers. For printers you'll probably have to look at Apple's manual or an Apple document. While I try to identify issues and problems when I can, it is up to YOU the customer to determine what memory and how much memory you need.

Up until March 29, 2004 I was using an old Fuji FinePix 1400 Zoom digital camera (1.3 MP). On March 29, 2004 I began using a Fuji S7000 digital camera (6.6 MP). I love the new camera. Back to index

Many new digital cameras offer several different settings for applying sharpening to images in-camera. Which one should you use? If you have a sophisticated image editing program, you should use the lowest possible sharpening setting. Why? The correct amount of sharpening to apply will depend upon the dispay method used for the image (printing, LCD, CRT, etc.) as well as the final size of the image and the content of the image itself.

Some cameras are designed for this, so you should check your manual. It's rare to find this feature in high quality digital cameras, but lower quality multifunction cameras with CMOS sensors sometimes offer this. See, for example, AipTek. If your camera doesn't already support some webcam features, you may still be able to do it if you have a video capture card (or USB device) of some kind, by connecting the video out from your camera to the video in on your PC.

Orient the card as shown below. For CompactFlash? media, hold the memory card so that the contact area is on the card's left, pointing into the card slot, and the CF Mark is in the upper left corner of the card. For xD-Picture Card? media, hold the memory card so that the gold contact area is facing the back of the camera and the notch is facing down.

Other considerations: multimedia capability; user convenience features (personal preference); power saving features; warranties; monitor display quality; number of USB ports; number of free PCI slots; number of FireWire ports; availability of DVI display port (connector for a flat-panel display with digital input). You also may want to check user ratings in consumer and computer publications for such things as reliability and quality of technical support.