This clear, virtually invisible urethane plastic film protects the leading edge of your vehicle from damage caused by stone chips, abrasion, salt, insects, and most types of environmental damage.

No, this is not recommended and is at your own risk. 3M film is supplied with an OEM-approved clear coat which is not formulated to be over-printed, painted or clear coated. See similar questions...

You may mix any of our urethane clears into the final coat of an ULTRA-GLO acrylic urethane paint job. Doing so is a quick and easy way to improve the gloss and long-term durability of the paint finish, without having to apply a full clearcoat. It should be noted that this is not as effective as applying a full clear coat. Kirker’s ULTRA-GLO acrylic urethane paint is completely compatible with all of our urethane clear products, so they will work together in any mix ratio. See similar questions...

If rocks or dirt get trapped under the bra, it will rub against the paint causing scratches. If the dirt remains under the bra for extended periods, paint will eventually be rubbed off. The area covered by the bra, over time, will also appear darker than the rest of the car (due to UV exposure). The bra should be removed when it is raining or before washing a car. A wet bra should never be left on a car. See similar questions...

You can't. The Heatproof temperature of our clear paint is 200?C to 300?C. The temperature of muffler rises to 500?C to 600?C, so you can't use a clear. It may be the reason that the nozzle of gun choked with little cleaning or too little dilution to the paint. Therefore, keep the gun clean and increase the dilution of the paint. If these are not the reason, the bore of gun may be too big. See similar questions...

Once applied, refrain from washing the vehicle for 24 hours. Washing after that time presents no problem, and no special care need be taken for the film. However, the use of high pressure hoses may lift the film, so please avoid using them near the film. We recommend that you clean the film at least once a week, and wax the film 4 times a year. See similar questions...

If desired, film can be removed at any time by picking up a corner of the film and pulling the film off the vehicle surface at a 180-degree angle. If the film has been present a long time, or if the film and vehicle are cold, a heat gun or hair dryer may be used to soften the adhesive, allowing easier removal. If any adhesive remains on the vehicle after removal of the film, it can be removed by using 3M General Purpose Adhesive Cleaner, according to the package directions. See similar questions...

Paint protection film is a transparent polyurethane film that adheres to the painted surface of vulnerable areas on your vehicle. It can be removed without any damage to your paint. Our film is made by 3M and it is one of the most advanced protective coating products you can apply to your vehicle. Our new premium film, made by 3M's aerospace division is far superior than anything on the market today. There are some companies online offering "paint protection kits" for $19. See similar questions...

Once applied, refrain from washing/wetting/cleaning your bike for 24 hours. After this period, no special care need be taken for the film. Use same care and non-abrasive products used for the rest of your bicycle. See similar questions...

There is one excellent reason to install 3MTM on your car. It's a great way to protect your investment. With cars and trucks costing $30K, $40K, $50K and more, it makes sense to install clear bra to protect your investment against unsightly rock chips and broken headlight covers. See similar questions...

Yes. The film will cover vinyl stickers but there are two things to bear in mind. First, the sticker may come off when the film is removed, and second, vinyl stickers are much thinner than the PPF and there will be a small air gap around the sticker. This may not be desirable. There is no problem with graphics that have been clear-coated. See similar questions...

Yes. We recommend that you regularly apply wax (4 times a year) to the film to keep it from getting stained by dirty water and chemicals. When waxing the vehicle, some wax may build up along the film edges. This can easily be removed when dry with a soft cloth. Do not use any waxes containing dyes or waxes that are not recommended for urethanes. Abrasive polishes and/or rubbing compounds are not to be used. See similar questions...

No!!! In fact we went through extra efforts to find the perfect product/film that would allow a first timer to have great success in installing our product. The patterns were designed with the do-it-yourselfer in mind without sacrificing coverage. Can you apply a sticker? Can you take 20 minutes to watch a DVD? If you answered YES then most likely you will have no troubles installing our 3M AeroGard film. See similar questions...

A.It is possible, but the application would be difficult and expensive. This product is really intended for the most vulnerable areas of the vehicle. See similar questions...