Make sure your scanner is plugged into the correct interface. Then turn to the front cover of your configuration manual and scan the following marked bar codes: "start", "set", "end". This sets the scanner back to the factory setting and keyboard wedge interface. If there are changes you need to make, such as setting the data start/end characters or using RS-232 (serial), scan those codes before scanning the "end" code.

Yes, the Connect-A-Dock can be reconfigured, added to, and moved to another location. The unique connection system is very flexible, and you can reconfigure the same components into many different shapes. (i.e. T, F, L, swim platform, etc.) Different configurations may require additional float sections and/or connectors. These can be added at any time.

The following procedure readies a Falcon for use with a custom UPG program, IntelliTrack portable application, or standard PAL software. Reconfiguration should be done whenever there it is suspected that the loaded configuration or application files have become corrupt or a malfunction occurs. Usually, this is evidenced by erratic performance.

HOTSPOTZZ requires only a few simple changes to your computer. Use this table to locate instructions for your operating system and wireless LAN card. If you don't see your card or operating system here, write to our customer service team or call 1-866-776-8991. Customer Service hours are Monday - Friday 9 am to 6 pm MST.

You might have to change the CCFLAGS field from '-I/usr/local/ssl/include/openssl' to point to wherever your openssl .h's are. Also, you might need to add to LIBS the location of your openSSL libraries if they are not in the default location.

To reconfigure the NVRAM, you first erase the Cisco 675 or 678 modem configuration and then reset the modem.

If so, scan your photographs into your computer. Please make sure that you are scanning at 300 dpi. Then burn the files onto a disc.

Scanners are available at most computer and electronics stores, with basic models starting at about US$200. Scanners generally come in two styles, flat bed or "upright". Flat bed scanners are like photocopiers. You place your document on the scanner window and close a cover over it. The advantage of these scanners is that you can scan books and magazines as well as loose leaf documents.

There is no need to change computers using private addressing. If you have a router involved in the configuration, you may have to change the IP address of either the router or the Smart IAD device in order to allow the Smart IAD to pass the voice traffic.

If all the ME users have analog phones on their desks, then it is unnecessary to do anything with the PBX. If not, it is necessary to modify the PBX configuration.

Not usually. There is typically no need to configure your network or firewall. You can install it on any PC connected to the wireless network running Microsoft Windows 2000, XP or Vista. Yes - myWIFIzone now supports wireless networks running WEP. In fact, if someone hacks your WEP key, they will still be blocked by myWIFIzone.

You can reconfigure those CPLDs but we don't recommend that you do so. The factory configuration for those CPLDs is designed to use all the pins on those devices and it is highly unlikely that you can develop a design capable of driving all of the devices on the I/O board you are using. You may be able to develop an LCD driver that could work but other devices on the I/O board would no longer work.

make reconfigure only works within the core Harvest code (the files in the src/ subdirectory) and not on any of the components. This is a bug, which will be fixed. However, a similar result can be obtained by using 'make realclean', on the next 'make' the software will be reconfigured. This section contains questions about, and solutions to, some of the problems that have been encountered when running Harvest.

The Scanner Attestation should be signed and sent in to the ACR only if you have a scanner that does not perform the exams from the three required categories (i.e. head/neck, chest, and abdomen regions). Please reference the clinical image section in the Program Overview.

The scanner works with strong magnetic fields, which builds up energy. The energy is released as loud knocking sounds.