Malm's wax can be used on these surfaces in most cases. However, some surfaces may be very absorbent and you should test in a small area first. You can use our polish on fiberglass and chrome with excellent results. When using our polishes, lighten up your hand pressure on the last 10 to 20 strokes. This will give a better gloss and more control when trying to prevent those tiny scratches.

Certainly! In addition to cars, boats and planes, Polish & Glaze works very well on gold, silver, brass and copper objects such as jewelry and household decorative items. The polish will also remove the fine scratches and restore shine to painted furniture. Works especially well on the darker colors. Malm's Carnauba wax can also be used on fine wood furniture. It gives a satiny smooth finish without the smears and stickiness associated with many over-the-counter furniture polishes.

This is usually a sign of oxidation, which occurs as paint ages and decays from exposure to sunlight and road oils. You can slow the process by washing your vehicle often, applying a coat of wax at least once a year, and our Clearcoat Shield™ each month. If oxidation has already occurred, try cleaning the paint with a paint cleaning compound, then polishing and waxing the finish. Or visit a professional detail shop.

Tattoo needles do not dull with age, but instead become sharper by the repetitive honing motion they experience in the tattoo machine. This happens because the metal of the sanitary tube rubs against the needles, and the softer metal (the needles) will wear. The problem with these sharpened needles is that they sharpen into flat razor-like edges, and begin cutting the skin instead of piercing small holes.

SANI-TRED products are not just coatings, they are permanently flexible, ultra-adhesives which deep penetrate and bond to all basements surfaces. The adhesive bonds made with SANI-TRED products between unlike materials such as; All such bonded joints will break, during destructive testing, at other than the bonded joint itself.

There are many options for finishing a project. My standard finish includes dyes, wiping stains, sealers and lacquer. Dyes and stains used together produce a much deeper color (and darker if preferred) without "muddying" the finish. Grain patterns remain visible and can be highlighted if desired. I generally mix my own dyes and stains to attain a color that I am trying to match. Glazes highlight the pores and grain patterns.

Yes. Treat the painting application as you would any raw plaster surface. A good primer-sealer is recommended.

For the body we recommend the Beautiful Body Butter. yes"> It is wonderful. Not to mention it rejuvenates your skin all over and helps prepare you for the summer to come. Audrey Riddick (Georgiana Creations, Marketing and Sales) uses it daily and loves it! Her skin looks and feels fantastic. Once applied it is quickly absorbed into the skin. You will think your skin is a sponge. Tip: Use this on your feet after and in between pedicures.

You may be able to renew a dull finish without completely refinishing the floor. Still, some hardwood floor manufacturers recommend that only professional refinishers tackle the job. If you decide to do it yourself, begin by sweeping with a good broom and then vacuuming the surface. Next, use a buffer with an abrasive pad and/or fine-grit sand paper until the finish feels smooth. Another option would be to use a rectangular oscillating sanding machine.

Bella Blue takes great care to ensure a long-lasting finish on all of our hand painted products. Our special protocol, developed over a year of testing, incorporates the most advanced techniques for wood preparation and paint application, and we use only the finest paints and sealants. Our needles and hooks have been used by crafters for over three years, and some have withstood daily knitting with little evidence of stress.

Yes, if strong colors were used, a stain blocking primer would help in shifting to a lighter color scheme. For Rag Rolling, you soak the rag with the chosen glaze, ring it out, then roll/twist it into a cylinder. You then roll the cylinder on the wall. For Ragging, you merely bunch the rag up in your hand and use a pouncing motion similar to sponging the surface. This method is ideal for getting into tight spaces such as walls. The Ragging Roller has a twisted cloth cover.

The University of Texas completed a study that shows that a single home wash can leave scratches in your vehicles finish as deep as 1/10th of the paints total thickness. Hand washing and use of many of the chemicals used not specifically designed to wash cars, like dish soap, can damage your finish. Uneven pressure from the hand washing can place up to 100 pounds of pressure on your vehicle damaging your vehicles finish.

We have all the information you need for finishing our beams on our website at FauxWoodBeams.com/beams_installation.php. We recommend using an acrylic deck stain. An acrylic deck stain dries in about an hour or two as compared to a gel stain that about 24 hours to dry. Also a good deck stain will have a UV protector in it to prevent the finish from fading. Oil base stains do not work well with our products.

Polish & Glaze can be applied with a motorized polishing machine. We suggest units that use an orbital motion that resembles hand polishing. These machines are usually easier and safer to use than high speed rotary buffers. Polishes tend to dry rapidly when using machines. Dry polish will simply blow off the paint and you must keep applying more. To avoid wasting polish, simply keep a spray bottle filled with distilled water handy. Spray the paint often so the polish stays damp.

No. Paint will not adhere to polyethylene plastic and could damage the polymer structure that makes up our toys.

Ultra Finish uses only the finest products to insure longevity, durability and quality. We only use products from major manufacturers such as Benjamin Moore, Porter and Sherman Williams. We will assess and customize each job individually in order to provide your home or project with the best suitable products.

Make sure you are using enblend to do the final image assembly, this will blend the overlap as much as is possible - Enable enblend by stitching the images into a high quality TIFF file in the stitcher tab. If you still have problems, then you probably have to correct vignetting in your images. In the vignetting area of camera and lens tab, select edit parameters...

No, most of our furniture items are fully constructed and do not require assembly. However some accessories and furniture items may require slight assembly (i.e. lamp shades placing on a lamp base, bed assembly, base attaching to table top, etc...).