About 50% of patients develop clicking after total knee replacement. This is normal and there is no need to be concerned unless there is pain associated with the clicking.

YES. All Parmak fence chargers are "solid-state" with no moving parts inside the fence charger. The clicking noise heard when the fence charger is operating is caused by the magnetic field surrounding the output transformer being released each time the fence charger pulses. NOTE: Fence load will effect the volume (loudness) of the clicking sound. As an example, the clicking sound will be the loudest when the fence charger is operated in an open circuit (not connected to the fence).

Yes we can! A clicking hard drive usually means that your drive has internal mechanical parts that have failed. In order to recover mechanically failed drives, a clean environment is needed. Flashback Data's recovery lab is equipped with a Class 10 clean environment. The class number refers to the maximum number of airborne particles greater than or equal to one-half of a micron that would be allowed in one cubic foot of clean environment air.

The clicking sound you hear while accessing the ePanel Builder with Internet Explorer is a Windows feature which makes a sound when a page is loaded and is a product of the advertisements loading on the page.

You might try using a good equalizer and/or digital signal processing (DSP) unit between the playback and recording devices. Some people have mentioned that the Radio Shack DSP unit does a fair job. There are also other, more expensive DSP units available from Ham radio stores and audio stores. Some subscribers have attested to the efficacy of the Timewave brand of DSP units. There are several computer programs available to convert analog sounds (as on a tape) to a digital format (e.g.

No, this is not a normal sign. However, this may be a sign of unstable spinal bones and ligaments, weak muscles, or even the early signs of spinal arthritis. This condition can be corrected if it is detected and treated soon enough, before any permanent damage is done. A personalized corrective care plan should be designed for you to restore, strengthen and prevent any future problems.

Approximately one-third of patients (30%) will experience some sensation of clicking in the hip after surgery. It usually goes away after a few months. This 'clicking' has not been associated with anything bad. It is usually painless and happens just with certain positions. Patients with clicking are not at increased risk of dislocation or failure of the device. No increased wear of the parts has been seen in patients with clicking.

If your engine is new do not be concerned. The parts are inspected during manufacturing and during assembly. Your engine has also been test run just prior to shipping. Everything is OK. Now, what is the reason for the clicking? Jett rods have about .003-. 004 (.07-. 1mm) rod-to-crankshaft clearance. This is approximately twice that of an O.S. This is why you see the extra motion.

Yes. The clicking is due to the signal from the tuner coming back into the circuit. The PB1 will drive the signal and should eliminate the effect. You may want to use a BigShot EFX, i/o or ABY as part of your system to further advantage your setup and for quiet tuning.

The clicking sound comes from a system-wide setting in the Sounds and Multimedia control panel. To disable the clicking, go to the ‘Sounds' tab and change the setting for the ‘Start Navigation' sound event to ‘None'. (This setting is under the Windows Explorer section of the Sound Events field.) Click the ‘Apply' button and restart your browser to finish disabling the clicking sound.

You may hear a clicking sound in the player each time it refreshes. The sound is a function of the default settings in the Microsoft operating system and Internet Explorer. To turn this clicking sound off, do the following: Go to Start>Settings>Control Panel, and double-click Sounds and Audio Devices. The Sounds and Audio Devices Properties dialog appears.

Answer: You must get the latest drivers for your sound card. These generally are available from the web site for the manufacturer of your drive. Answer: For safety reasons, DVD X Maker requires that the DVD Video Path end in "\DVD-Video\". The files in this directory are deleted and rebuilt when you build and burn a DVD. DVD X Maker will not automatically erase the files in that directory unless the proper naming convention is used.

We have lots of MEG users and we make the button extra quiet for them. Just let us know when you place an order.

The sound is the actuator inside the Cat Door locking and unlocking the door. When your cat or dog is near the door, the signal from the key on your pets collar is instructing the door to unlock. This is normal!

The drive has an internal problem which is commonly known as "lost servo". Shut down your computer, remove the drive and send it to a professional data recovery company. Powering the drive off and on can only do more damage.

Please follow to the simple procedure below to disable the clicking sound in Microsoft Internet Explorer: Start -> Settings -> Control Panel -> Sounds and Audio Devices ("Sounds & Multimedia" in Windows 2000) Scroll down in program events until you see "Windows Explorer" and then click on "Start Navigation"

Although the BC Archives stopped publishing the Sound Heritage series in 1983, many of the books are still in print and available from Crown Publications of Victoria. The BC Archives continues to sell copies of the cassette sound programs. For more information on the availability of the book or cassette you're interested in, please refer to our publications list. The BC Archives' library and archival collections are non-circulating and therefore unavailable through interlibrary loan.

A double click is executed by tapping three adjacent fingertips on the MultiTouch surface. A left mouse click is executed by tapping two adjacent fingertips. Right and middle mouse button presses are done with other finger combinations. Clicking can be invoke anywhere on the surface.

No, we have not reproduced any videos except the edited versions for the television. Although we have had many requests for videos, we currently only have audio cassettes available.