Before beginning printing, go to File / Print Setup. Select the landscape or portrait orientation, paper size, printer and printer properties. Note: Set the paper size and orientation before going to Preview and Print. Otherwise you will get some odd results!

I received an "ORA-03123: operation would block" message. Anything I tried after that returns an "ORA-03127: no new operation allowed until active operation ends". See similar questions...

The lpr command takes the -o flag, after which you can specify any number of options. Common ones include: Unfortunately, the postscript interpreter in many HP printers is buggy. Because of this, it's possible for a poorly formatted PDF file to generate malformed postscript which the HP printers do not know how to properly handle. When this occurs, the HP printer will dump the print job, and act as if it was properly printed. There are two things which cause this problem: 1. See similar questions...

Answer: You need the correct printer driver in Interact to match your printer. A Printer Drivers Utility program is available. This utility is available to Product Support Program (PSP) members. Please contact your local distributor for more information about the PSP program. Answer: On a Remote Message Display tool, use the Link variable: LINK\ALARMS:A in the Message Text Output field. Question: I am getting the following error message: "Cannot initialize PTM. See similar questions...

I am having problems getting a particular time sheet or expense report to properly process in the Tracker - Forms Routing or Tracker - SQL Posting folders. I can't view TrackerOffice reports within TrackerOffice and Outlook. However, they work fine from IE. In Outlook, the right pane just has the name at the top and when I click on a report type in the left pane, the entire pane disappears without showing the report. See similar questions...

We recommend using "n-up" printing to print multiple miniature pages on a single sheet of paper. Many times, 2-up printing is sufficient for course notes or proofreading documents. See similar questions...

If we rate every option in state space by its achievement against some criteria then we can plot that rating as a fitness value on another dimension, a height that gives the appearance of a landscape. The result may be a single smooth hill (a correlated landscape), many smaller peaks (a rugged landscape) or something in between. See similar questions...

This is an error that has been reported but we do not have a good solution. It seems to occur with Laser printers, specifically HP. We believe this problem exists if you are using the HPL 5 Laserjet Printer Driver. a. If available, go to the Properties tab for the Printer and change from Raster images to Vector images. d. Change the option of the Print Data in the data logger program. If you are printing the data under "Output All", try "Compressed Normal" instead. e. See similar questions...

Yes - The version (v 8.13/9.13 and above) of cViewMANAGER and cViewSERVER allow you to control page orientation and the number of copies. See similar questions...

For the top to remain suspended, equilibrium alone is not enough. The equilibrium must also be stable, so that a slight horizontal or vertical displacement produces a force pushing the top back toward the equilibrium point. For the Levitron, stability is difficult to achieve. It depends on the fact that as the top moves sideways, away from the axis of the base magnet, the magnetic field of the base, about which the top's axis precesses, deviates slightly from vertical. See similar questions...

The reason your photos may appear sideways in Afiniti is because you probably composed the shot this way when you took it. After importing your digital pictures, go to our Pics area. Here, you have the option to edit your photos, specifically rotating them. You can easily change other attributes of your pictures such as sharpness, brightness, contrast and even view them in black & white mode! See similar questions...

A swamp is an obstacle so when moving onto it from a flanking site you must move onto the site nearest the board. On the other hand, you may move onto a flanking site from either of the two swamp sites. Back to the top See similar questions...

Select Generate Report, View, Close by using the Door. The Report Destination box will appear. Check "Prompt for Printer Setup". Click Print, Properties, Basics Tab, and Under Orientation, choose Landscape. Although we do not have a report that actually shows pre and post test on the same report, we do have something similar, the Crosstab, Summary & Stats report. See similar questions...

The total print facility is only active when you are using manual printing mode. Will ask ADC for software change. NOTE: Software change made and customer purchased one time programmable processors from ADC to meet application. I understand this modification will be incorporated into the standard model when they next burn masked ROM processors. To set the OP-07 to work correctly the links and switch on the main board must be set to: JP1 open; JP2 linked; SW1 on. See similar questions...

No known methods around this. It also lags the phone as the screen switches to portrait mode everytime you start to use it. Hopefully, Nokia provides an option in the next firmware release. See similar questions...

To print the information retrieved from a PACER web site, click on the Print button of your browser. If there is a "frame," click on the "frame" you wish to print before clicking the print button. If there is not a frame, click in the body of the document before clicking the print button. See similar questions...

I would hope you would choose drought tolerant vegetation for the bulk of your landscape to help conserve water. If you have to have grass I'd keep it to a bare minimum. But each garden is going to be different as are the gardener's likes and dislikes. If you really don't have any idea of what you should grow in your landscape I'd consider hiring a landscape architect. Tell them what you're looking for in a garden and ask them to suggest plants that use little water. See similar questions...

My mode allows you to save customized camera settings. My Mode allows you to save different setting configurations. To use the "My Mode" settings, turn the mode dial to the icon shown. The My Mode configuration is selected by the menu selection Mode Menu > Camera > My Mode. See similar questions...