The traffic light is a red ,yellow or green spot on the upper left corner of the stock symbol. each time when the application refresh the content, it show the traffic light. Red means network is not available, the destination cannot be connected. Yellow means the destination can be connected, but the content retrieved is not correct. Green means the information retrieved is correct.

It seems like Vancouver is unique in having some of the traffic lights blinking green at various times of the day. The blinking light means that the light is not on a regular change cycle but can be activated, when needed by a pedestrian or cyclist.

Means that the crossroad has a flashing red, but that the signal goes into normal operation if a car triggers a sensor on the crossroad by waiting a given amount of time. Flashing green/red resumes soon after. (These have likely been removed from the state.) Same as DE's, but only found at crosswalks, and triggered by a button pushed by pedestrians. May be located at a side road or crossroad with a stop sign so the cross traffic can take advantage of the red time on the main road.

If the Low Battery light comes on you should either switch to using the wall adapter or change to a fresh nine volt battery. This yellow light is set to come on when the battery power drops to 5 volts. You should not attempt to make remedies with the yellow light on, it will not make proper remedies when the light is on. When replacing the battery be cautious.

The following are the common signs that you are not getting enough bright light in the beneficial wavelengths:

If there is a traffic light out call the Sanford Police Department non-emergency line 407.322.4141. The Police Department will contact Seminole County Traffic Engineering.

If the light is on all the time, it could mean you simply forgot to release the parking (emergency) brake. The brake warning light remains on when the brake is set as a reminder. If the brake warning light remains on when the parking brake is released, then something is amiss. In some cases, the brake warning light may remain on if the switch on the parking brake pedal or lever is misadjusted. Nothing is wrong with the brakes and a simple adjustment should fix the problem.

It means your vehicle's onboard computer system has self-diagnosed some kind of problem. The "Check Engine" light, which is also called a "Malfunction Indicator Lamp" (MIL) or "Service Engine Soon" (SES) lamp, is there to signal you when a problem occurs that may require attention. This can include anything from a momentary hiccup that has has little or no noticeable affect on engine performance or driving safety to a failure of a major electronic component.

When the light is flashing, it means that the drive is in use and data transfer is taking place between the drive and host machine.

The control panel continuously monitors a number of possible trouble conditions (i.e. phone line, battery, etc.) If one of these trouble conditions occurs, the keypad will beep twice every 10 seconds until you press any key on the keypad. NOTE: A TROUBLE condition reduces the security your system is designed to provide. Call our office for service as soon as possible.

Some California Court's approve traffic school with restrictions. Sonoma County allows traffic violators to attend ABetterTrafficSchool.com but with restrictions. They require the Student to contact the Court to ask for permission to attend traffic school on the Internet BEFORE the student registers and completes ABetterTrafficSchool.com. If you have received a flyer from the Court with a list of traffic schools, then you are allowed to attend www.ABetterTrafficSchool.com.

This indicates your Xbox is overheating (and is protecting itself by not allowing usage), ensure you have 6 inches of space on each side of the Xbox and your Xbox is off of any soft materials such as carpet that may block the ventilation openings.

GREEN READY LIGHT.......... flashes when the PULSE POWERTM charging cycle is complete and has entered the maintenance mode. Battery is ready for use. Battery can be removed and used now or anytime during the charge cycle without ever damaging the battery. If you leave your battery in the charger, the yellow charging light blinks on periodically to let you know that your battery's charge is being maintained at the proper level.

RED DEFECTIVE LIGHT..........Illuminates if your battery is defective by PULSE POWERTM's patented microprocessor. PULSE POWERTM may be able to recover a defective battery. Retry 4 or 5 times by removing and replacing battery. Should Red Defective Light continue to light, battery can no longer be charged and should be disposed of properly. PLEASE REMEMBER....NEVER THROW YOUR OLD BATTERIES IN THE GARBAGE - RETURN BATTERIES TO WHERE YOU BOUGHT THEM.

You will always see a control line but if the test line shows up very faint pink or purple within the 10 minute cutoff time, you should assume you are pregnant. You should contact your doctor for further testing right away. You can also re-test in two days and you will probably see a darker line.

A blinking light on your printer can indicate normal operation, a warning, or printer malfunction. The blinking light may be green, amber, red, slow, normal, fast, and implication will vary from model to model. On our current models, a green ready light that blinks once/second usually indicates that the printer is receiving data. A red or amber error light that blinks once/second usually indicates a printer error (paper out, paper jam, cover open, printing error).

YELLOW CHARGING LIGHT.......... Pulses while PULSE POWERTM is charging the battery and simultaneously eliminating "memory effect" (voltage depression). Yellow Charging Light also illuminates each time a pulse charge is performed during maintenance mode (once every 15 - 45 seconds depending on battery profile).

ORANGE OVERHEAT LIGHT..........Illuminates if PULSE POWERTM determines that internal temperature exceeds a safe level and terminates charging cycle. Battery may be charged and can be immediately used. If left on the charger, charger will transfer to maintenance mode when safely cooled.

When the iPod Hi-Fi recognizes that an iPod that has a dock connector was inserted into its dock connector port Indicates that the iPod Hi-Fi received the command, but cannot performed the function. Example: Volume is set to maximum, and you press the Volume Up button. The iPod Hi-Fi could be paired to a different Apple Remote. This may occur if you have another device that uses the Apple Remote, like the iMac, MacBook Pro, Universal Dock, etc. iPod Hi-Fi playback of iPod has been paused.