No, Fresh Air Concepts' air purification systems require limited installation. However, each installation varies depending on the application.

air filter is designed to collect particulate from the air. Air-born living organisms such as bacteria and viruses pass through the filter much like sand would pass through a tennis racket. Some filters such as carbon filters do a good job with odors, but they have to be changed frequently and are very costly. In contrast, Fresh Air Concepts' air purifiers are designed to change the molecular structure of the contaminant through Photo-Oxidation and DNA Sterilization.

Yes, the air purifier kills germs and bacteria and destroys odors; but it does not dispose of the particulate, which is airborne. This requires a quality particulate filter.

For each product, we list all components that are included with your system. Unless you have an unusual installation, you will not require any additional parts to complete your installation. All of our systems also come with enough replacement filters for a complete year! You will not have to purchase replacement filters for 12 months! The vast majority of our systems are very easily installed by the homeowner. Detailed installation instructions are provided with your product.

Some systems such as water distillers do not require installation. Some, such as countertop filters and shower filters, require minimal installation by screwing a connector onto the kitchen faucet or shower pipe. Some, such as undersink systems, require more installation but the help of a friend who is good at handyman jobs will suffice. Alternatively, you may choose to ask a plumber to install the system.

Most units are easy to install, especially when they are replacing another forced-air system. This is known as a retrofit. GSHPs can be installed in areas unsuitable for fossil fuel furnaces because there is no combustion and thus no need to vent exhaust fumes. Ductwork must be installed in homes without an existing air distribution system. Your dealer or installer can assess the cost of installing ductwork.

Fresh Air Concepts' air purifiers are CSA and NRTL/C certified and have been third party real world tested. In addition to several university studies in the United States and Canada.

Fresh Air Concepts' air purifiers will destroy biological and chemical contaminants such as bacteria, viruses, mold, mildew, smoke, formaldehyde, cleaning solvents, etc. Click here for a list of contaminants treated by Fresh Air Concepts' air purifiers.

Mold feed off bacteria in order to grow. Fresh Air Concepts' air purifiers destroy the bacteria, which means mold has no source of food. Without a source of food, mold will quickly be destroyed.

Electrical consumption varies by model. The FAC1500X and CMU-16 use approximately 15 watts of electricity and the FAC3500X uses approximately 25 watts of electricity, which is less than the average light bulb.

Induct models are designed to run 24 hours a day. That is not to say that they will. The in-duct models have a sensor, which means the unit will only run when the fan is on.

For use on your company's intranet, installation on your network server merely requires a simple installation. You may also choose to access the program through the internet.

The ground loop can be difficult to install, depending on rocks, physical obstructions and topography. The interior heat pump is easy to install, and can be located in areas without proper ventilation (there is no combustion, so no need for exhaust). Most units are easy to install, especially when they are replacing another forced-air system. The air distribution may be difficult in a retrofit installation.

Indoor air pollution is among the top five environmental risks to public health, according to the U.S. Environmental Protection Agency (EPA). Lung-damaging indoor pollutants may include house dust, pollen and pet dander particles, and tobacco smoke, fumes released by chemical-based cleaners or gases produced by synthetic building materials.

Because we build air-tight homes now, we also breath re-circulated rather than fresh air. Because we seldom (if ever) clean our duct-work, we’re breathing air that circulates through that dirty duct-work as much as 50 times a day! Single-room air purifiers are all the rage right now–they can cost hundreds of dollars–and you need one for every room–which can add up to thousands of dollars.

With the help of our installation tape and manual, the PowerCam usually takes about 90 minutes to install for some one who has never installed a system before. The Investigator Plus will usually take no more than 30 minutes. Many officers install their own systems, and the IPT staff is available from 8:00 a.m. to 4:30 p.m. to assist anyone installing the systems.

Sterilight UV systems require the lamp to be changed on an annual basis (provide they are not installed in a seasonal home). It is suggested that the quartz sleeve be cleaned during the lamp change provided the home is supplied with high quality water (no iron, hardness etc.) otherwise the sleeve should be maintained on a regular basis. Please NOTE: If the Sterilight system you have is monitored (ie. Has a sensor) you must ensure that you clean the sensor eye as well as the quartz sleeve.

You need to know how to register a ColdFusion datasource - either on your own server, or through your web host provider. Once that is completed, you simply enter in the setup URL string into your web browser to run the setup routine. Things get a little tricky when your shopping cart is not ColdFusion. There are alternate solutions mapped out, and explicit instructions on how to implement the solution.

A Sterilight system requires two water connections and one electrical. Very simple. You can install any of the Sterilight systems either vertically or horizontally HOWEVER there is a right and a wrong way to do this.

Simple answer, no we will not. We are not being difficult when we say this we are actually trying to help you. phpBB has a reputation for being easy to install, that reputation is we believe well deserved. It is a simple process of unarchiving a single file, uploading the resulting directory/files to their intended location and entering some data in a web based form. The sequence of events, what to type where, etc. is covered in detail in the accompanying ./../support/documents.