We will need to know the following information: How far out from your house is the eave? Are your overhangs supported with 2 x 4 or 2 x 6's rafters? How far apart are the 2 x? rafters? Your awning includes the required "flashing" to enable you to provide a seal at either mounting location. If at all possible, it is better to mount to the wall for larger or heavier Live Loads. Please consult with us as to your best type of installation (eave/wall?).

Will look much nicer if connected to wall. We will need to know the following information: How far out from your house is the eave? Are your overhangs supported with 2 x 4 or 2 x 6's rafters? How far apart are the 2 x? rafters? Your awning includes the required "flashing" to enable you to provide a seal at either mounting location. If at all possible, it is better to mount to the wall for larger or heavier Live Loads. Please consult with us as to your best type of installation (eave/wall?).

No. All Closet.Tec systems are free-standing floor unit for stability and durability. We do attach the free-standing unit to the wall to prevent any tipping over or danger of the unit falling. This allows us to use the wall, instead of backing to provide the required structural rigidity.

The cabinet is designed to recess into the wall and is held in place using a high performance construction adhesive that has 9 times the initial holding power than any other construction adhesive on the market. First, applying the adhesive to the back of the cabinet frame and then apply firm and even pressure as you insert the cabinet in the cut out. Allow 24 hrs. for proper curing and your ready to enjoy your new built-in cabinet.

The shelf is easily mounted to the wall with hanging hardware that is included. Ideally you want to put screws into a stud for more support. However, if you do not have that option, use the anchor that is provided. Drill a small hole in the wall and lightly tap in the anchor and then the screws. Leave the 1/8 of the screw tip out so you can hang the shelf easily. It’s designed by a mom so it’s very easy… even your husband can do it!

Some choose sheetrock or conventional interior wall finishes, since it has now become an interior space. Other customers leave the exterior finish for more of a porch-like feel.

With peel and stick neoprene automotive-type adhesive tape, or if you wish we will affix a magnetic strip at no extra charge. However, we cannot guarantee how well the magnetic strip will adhere in your application. From personal experience it won't survive an automatic car wash.

No attachment is necessary when using the compression kit to secure the pole in place. The shelves go between the poles and the wall and do need to rest up against the wall.

FreeCardBiz Displays attach to the wall with two green plugs small screws One person can install a display in about five minutes.

Use wall mounts to fasten the rails of the fence to a column. Wall mounts are small aluminum castings which go over the end of a rail and have holes to attach them to a flat surface. there are two types of wall mounts. The standard ones attach straight onto the column, while our adjuatable ones will allow you to come off the column at up to a 45° angle.

Only awnings "constructed of light-weight metallic material which does not exceed 1 pound per square foot dead load" may be attached to a manufactured home. For further information, contact the State of Nevada's Manufactured Housing Division. (See NAC 480.475)

Yes, we have wall mount castings that slide onto the fence sections to allow mounting to any vertical surface. The wall mount brackets attach to the surface with two screws.

You should NOT attach an extension to the power cord to reach a wall outlet. Only use the right-angled, grounded power cable supplied with the VELscope System. Only connect the VELscope LSU to a properly grounded wall outlet.

We've had reports of very good results using Liquid Nails. The material can also be screwed to the wall.

A wall mount bracket is secured in your pool wall during construction or refurbishment. The hydraulic hoses run through the wall mount bracket and pool wall, under the pool deck, and emerge back near the Power Unit. Back to FAQs

We charge by the square foot. Measure the area you need cleaned and give us a rough idea about its square footage. We can then provide you withe the cost for each room. For stairways we charge by number of steps . Let us know how many steps you have and we can give you the cost for cleaning your stairway carpet.

These days most homes have R-factors in the insulation in the wall that for the most part keep the ambient temp consistent. The thing to keep in mind is that you never want to put your piano too close (no closer than 3 or even better 4 feet) from either a heat or air conditioning register or to a window that doesn't have any insulation factor (all single glass pane windows fall in this category).

Swing type shower doors usually come equipped with a perimeter frame that is anchored to the floor and at the same time supports the weight of the door. The glass block mortar joints may be used as a means of attaching the door frame only, without providing the main support. Ideally the mortar joints should be about ?" thick. Drill into the mortar joint a little off center to make sure that the drill bit does not nick the seal or any part of the glass block.