BRAVIA V Series models are capable of displaying 1080i signal which is from DVI source that converts to HDMI input of LCD TV.

Please note that only BRAVIA X-Series models for Japan, USA and Europe market support digital broadcasting currently.

At this time we believe that the more stable DVI format is a more appropriate choice, since it is well established and totally compatible with HDMI from a video standpoint. Unfortunately, HDMI is still a moving target, with the 1.2 specifications still awaiting final release. More importantly, there is a big unknown regarding the specifications of the ?next? version of HDMI that will allow transport of Dolby Digital Plus and DTS-HD data streams.

The audio can either be variable or fixed on BRAVIA V series. Please follow the instructions below: Choose Sound from the Settings option of W... To view photos stored in a Sony Cyber-shot or Handycam (DV format) camera on the LCD TV, please follow the steps below: Connect a Sony Cyber-shot o...

No, OLC with DVI at each end must be used. We generally do not recommend OLC for AV equipment as these OLC cables do not pass HDCP. OLC utilizes virtual DDC technology and thus, eliminate the need of copper connection. The virtual DDC is in the OLC transmitter connector and contains all DDC information required for the computer source, and this DDC information is fed directly to the video source.

Yes, DP900 or DP1100 projectors manufactured after January 2000 have this capability. You can check the manufacture date by viewing the serial number at the bottom of the projector. The first number after the letters in the serial number indicates the year of manufacture. For example: DP900 3TW0 15XXXX= 2000

Certain DVI sources such as the Evertz video processor and certain scalers do not have 5V coming out of pin#14 of DVI output. This is not in line with DDWG's DVI specification. Our OC obtains power from the video source's DVI pin#14 and if this power is not available, OC will not operate properly. For these type of video sources, we recommend using our DVI-G5P adapter(DVI female to DVI female adapter with 5V input) to be used between the video source and OC cable to feed the 5V power.

DVI is Digital Visual Interface. This is an old standard for digital video input used initially for PC screen connections but also suitable for HDTV. PC owners may be familiar with the DVI cables used to connect their monitor. HDMI is the High Definition Multimedia Interface. It was introduced more recently with Digital TV in mind and has been called the SCART socket of HDTV. Unlike DVI it includes audio content as well as video. HDCP stands for High-bandwidth Digital-Content Protection.

No, not at launch. Microsoft has said that they will provide one “when it makes sense.” Recently many sites are reporting that a so-called “version 2″ Xbox 360 — codenamed “Zephyr” — is in development with a built-in HDMI port, larger hard drive and cooler processor. Microsoft has responded by saying that anything seen today is from experimental systems and is not indicative of systems that might be released in the future.

This is an often asked question as many people have difficulty with these cables as they are litz cables that have individually insulated conductors. In most cases we pre-terminate these cables when supplying them with our kits. However, because we get asked about this so often, we have prepared a support page with a step-by-step guide. Click here to view the process.

If your signal is coming from a computer, make sure that the computer's display settings are set to 60Hz output rate.

No, the installer should bring one with him, but it's a good idea to confirm that you want a HDMI lead when you ring to make your installation appointment.

Yes, but you'll need a HDMI to DVI cable or adapter. You may be able to blag one off the installer - tea and biccies go down well. You'll also need separate audio cables because DVI only carries video. And if your TV doesn't support HDCP (check the TV manual) you'll be limited in what you can watch - most of the HD movies require HDCP. No, when you enable one the others get disabled - that's because the hardware isn't very good at doing both HD and SD at the same time.

Is the switch truly capable of achieving high definition signal such as 1080p? Many switches claim 1080p but, according to our tests, most of them only perform marginally even at lower bandwidth (resolution) Is the switch flexible and accurate in control? All PureLink™ switches have discreet IR remote control capability without any IR code conflict and in addition, PureLink™ switches can be controlled externally via RS-232 operated external controllers, which is essential for many cust.

There are three series of Woodsman pistols, corresponding to three basic frame designs. First Series refers to all those built on the S frame as it existed prior to and during World War Two. Second Series includes all versions built on the second S frame design from late 1947 until mid 1955, and Third Series means the third S frame design as used from 1955 to the end of regular production in 1977.

Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or High-Speed cables. Standard (or “category 1”) cables have been tested to perform at speeds of 75Mhz, which is the equivalent of a 1080i signal.

Yes, HDMI is fully backward compatible with DVI compliant devices. HDMI DTVs will display video received from existing DVI-equipped products, and DVI-equipped TVs will display video from HDMI sources. However, some older PCs with DVI are designed only to support computer monitors, not televisions. Consumers buying a PC with DVI should make sure that it specifically includes support for television formats and not just computer monitors.

The maximum resolution and specifications of BRAVIA LCD TV's are as follows. BRAVIA V Series: Support highest computer resolut...

All HDMI products are required to be certified by the manufacturer as part of the HDMI Compliance Test Specification. However, there may be instances where cables bearing the HDMI logo are available but have not been properly tested. HDMI Licensing, LLC actively investigates these instances to ensure that the HDMI trademark is properly used in the market. We recommend that consumers buy their cables from a reputable source and a company that is trusted.Return to top

With the 625A in the Pulse Generator Mode (function and pulse generator requires the ARB circuitry to operate), set the Offset at the midpoint of your desired signal. Set the Peak-Peak level for the desired swing. The Pulse Generator mode"s highest frequency is 2 MHz. If you need higher rates, insert a commodity TTL to ECL translator after the SYNC OUT signal.