Several people have successfully installed 18" wheels on their E46's, however it is unlikely that this improves performance over a 17" wheel. The advantages of a larger wheel are better steering response and aesthetics. The disadvantages are greater unsprung weight (may affect suspension response) and greater rotational momentum/inertia, i.e. acceleration and braking will suffer.

All M coupes use the same size tires (225/45ZR17 in the front and 245/40ZR17 in the rear) mounted on one of two versions of the five-spoke "M RoadStar" alloy wheel. Both are sized 7.5x17-inch (front) and 9x17-inch (rear), but there are two distinct finishes: Early M coupes (S50 and S52 engines) feature a Chromeline finish, while the later models (S54 engine) utilize a darker Chrome Shadow finish.

Yes we do - and we will be adding this information to the website shortly. The advantage of purchasing a wheel/tire package is that you are eliminating the need to have your wheels and tires balanced by your tire shop - we do that for you. Not only does this save you the money that it would cost at an independent tire shop, you also reduce the risk of that tire shop damaging the wheels.

The first thing you need to know for any of the computers is the rolling circumference of your wheel. If you have a 21inch front tire, this number is approx. 2205mm (221cm if your computer only accepts cm). Since there will be some variation due to different tire styles and tread wear, you may make the measurement yourself by marking the front tire and the ground with a felt pen, then rolling the bike until the mark makes one full revolution and returns to the ground.

It depends on the piercing, for most people the way the jewelry looks is key. After all, you don't want it to be too big or too small, but it must also work with the piercing and not prohibit the healing process. This is especially important for genital piercings as the wrong size jewelry may result in a totally useless piercing. Please don't forget that if you didn't find the answer to your question here please let us know by going to our contact page and e-mailing us.

The tire size is located on the tire sidewall. In the examples above, we have circled the size in red. The size of the tire on the left is P215/65R-15. The size of the tire on the right is LT235/85R-16. For additional information on what these numbers mean - click here. Since I’m a farmer do I pay tax? Only PA residents pay tax. A Pennsylvania Farmer or reseller can submit a tax form for exemption.

When checking tire size it's not necessary to measure anything. The diameter of your existing hubcap or rim is not your wheel/rim size, and will not give you the correct dimension. All tires have a "size series" printed on them that contains the wheel/rim size. This series of numbers usually begins with a P. - (example: P175/70/R15) In the tire "size series" the two digit number following the R denotes your wheel/rim size. (In the example the wheel/rim size is 15")

Never try to mount your own tires. Tire mounting is a job for the people who have the proper equipment and experience. If you try to do it yourself, you run the risk of serious injury to yourself as well as possible damage to the tire and rim. Never choose a smaller size than those that came with the car. Tires should always be replaced with the same size designation -- or approved options -- as recommended by the vehicle manufacturer.

Some replace the factory wheels to customize their car or to facilitate plus sizing, while others purchase aftermarket wheels to use on the track. Whatever the reason, a wheel and tire package selected must fit within the wheel well without rubbing on the suspension or fender. On street cars, it should have an overall diameter that is within ?3% of the factory specification.

There were two available wheel and tire sizes for the M635CSi. Early European-spec cars used the standard 6 Series metric-sized wheels (390mm x 165mm) with 220/55VR390 Michelin TRX tires. However, optional from the start of production (standard in some markets) were larger, two-piece alloys in a cross-spoke design measuring 415mm x 195mm (16.3-in. x 7.7-in.). Cars with these wheels carry 240/45VR415 Michelin TRX tires.

The second number is sidewall height as a percentage of the width. For instance, in this case, the sidewall is 55% of 205 mm: 112.75 mm.

We are glad to exchange new, unused items in their original condition within 30 days of purchase. Freight is to be prepaid by customer to and from our warehouse.

Usually a matter of individual custom fit, some piercings do have "standard" sizes which work for most people, and often there is a minimum size. The look is only part of what makes a piercing work for you. It must function properly as well. Jewellery which is not the right size can cause healing problems. Consult PdR for advice.

Most american bathtub size is 60"x32". Yubune2 is made to fit into standard size bathtub space.

The Natural-Fit is available for 22", 24", 25" and 26" wheels (including spoked wheels, Spinergy Wheels, X-Core, and mag) with either a 1) 6-position tab mount (e.g., connecting screws go perpendicular to the axle into the wheel rim and through flat tabs on the handrim), 2) a 6-position rivet nut mount (connecting screws go parallel to the axle through plastic round spacer sleeves), or 3) a 6-position or 7-position mag wheel mount.

Your vehicles wheel cover size is the same as your tire size. If your vehicle takes 14"tires, your wheel cover size is 14".__ Return To Top