To connect the audio output from the computer to the AV receiver, you need a stereo mini-plug to a stereo RCA pin cord. Then connect the line-out from the computer sound card to an available audio input on the receiver. Select the input and adjust the volume output from the receiver.

You typically have two options when connecting a powered sub woofer. Input (1) on the rear of the sub woofer would be used when connecting the sub woofer to the receiver using speaker wires. You would then connect the main speakers to the opposite end, or output or the sub woofer to the main speakers. Option (2) would be using RCA line level output jacks, input (2) on the rear panel of the sub woofer directly to the single sub woofer output on the back of an AV receiver.

In most cases, your TV may only have one set of video inputs. If this is the case then you are limited to the amount of video product that you can connect to the TV. By connecting all your audio/video components directly to the receiver, you would only have to use one video cable from the receiver to the TV. This in turn simplifies the connections, which makes video switching easier.

Yamaha Music Australia provides a two year warranty for AV receivers. Any additional warranty periods are provided by dealers. Warranty issues that arise after the two years from the original date of purchase will be referred to the dealer where the unit was purchased.

To get audio from your TV through your AV receiver, please connect stereo audio cables from an available AV input on the rear of your receiversuch as D-TV/LD or CBL/Sat. Then refer to your TV owner's manual for more information about audio output to an amplifier. You may have to turn off the internal TV speakers in order to get any output from the TV into the AV receiver.

Yes, many Yamaha AV receivers are stable down to, but not below 4 ohms. We recommend that you use only speakers with a minimum of 4 ohms. Also, please make sure that the impedance selector switch is set to the correct position as recommended by the owner's manual.

If your current receiver has no subwoofer (RCA) line level output, you will need to connect the subwoofer to your receiver using speaker wire connections on the rear of the receiver. You first need to take the speaker input from the subwoofer to the A or B speaker terminals on the rear of the AV receiver. Then take the speaker outputs from the sub woofer and connect to the main speaker terminals inputs.

The short answer is don't try if you are new to home cinema as the back of one of these machines can be very scary. If you are determined to do it yourself then talk to your dealer first to make sure you have all the right cables for your system, then carefully consult the handbook to ensure you have everything in the right place. You will then need to balance the speakers and set up the sound levels.

Probably. Any wireless receiver supporting the industry standard 802.11b or 802.11g protocols should work. However, in rare cases, we have found wireless receivers which had compatibility issues with the computer upon which it was installed.

HF-1000 - I needed to use a null modem cable, but one beta tester said he used a normal serial cable with his set. AR7030 - No popular serial cables work with the AR7030 due to the use of a DIN connector at the receiver end. The manufacturer sells a custom cable, part number 7030PC, which can be ordered from AOR or their distributors.

A USB cable and the presence of USB connections are not yet adequate for exchanging data successfully. However, data transfer can be effected using a USB cable if a serial COM Port is emulated by the GPS receiver. The GPS data must be available in the NMEA 0183 format when data is called up online, so that Geogrid is in a position to evaluate these data.

All of Onkyo??s products are come with the both English and Chinese instruction manual. Every user can easy to setting up the system guide by the instruction manual. If the user facing any connection of operation problems. Who can be contact with our Customer Service Center through by either telephone or e-mail. For contact details, please refer to the Customer Support webpage.

For those with USB-capable Macs, transfers to and from the GPS receiver data port work equally well through Keyspan USB to Serial Adapters under Mac OS X or under Mac OS 9. James Associates Inc. sells a complete line of interconnect cables for connecting a Macintosh to a GPS receiver. Whether your Mac is old or new, we have the interconnect cables that you need.

Any home theater receiver allows you to connect a minimum of five speakers, including a front left and right pair, a center channel speaker, and a surround pair. You can always add a subwoofer if desired. Some advanced receivers allow you to connect an additional one or two "back surround" speaker(s) for use with 6.1-channel sources such as DTS-ES or Dolby Digital EX-encoded DVDs.

Navtex receivers can be connected to NaviGator. Again they need to have the following pin connections: Pin 2 - NMEA / Position In, Pin 3 - NMEA / Position Out, Pin 5 - Ground. Once it is connected and messages are being received and they have a Lat and Long, they will be displayed on the chart for you to click on and view the message.

We provide an installation manual with step-by-step instructions. FSL equipment is designed for a wide range of interfaces and relays. For special applications, FSL can provide special interfaces.

The external input connections on the rear of the unit are designed for an MPEG2 processor that is very popular in Japan and was scheduled to come to the US. So at this point, there is no US made component that you can connect, short of a 6-channel separate processor that you can use for this port. At the present time, please ignore that section of your AV receiver. Currently, only the RX-Z9 and the RX-797 Stereo receiver are capable of accommodating a graphic equalizer.

All of Onkyo??s AV receiver are high current power design and its can be drive most of the speakers in the market. However the speaker system has its own specification with difference power requirement. Also difference brands speaker system has its own characteristics. So you are better to consult with the dealer and listen the sound performance you are searching for.

Connect one end of the Midi interface cable to Joystick port of your PC and the other end has to be connected to MIDI IN and MIDI OUT of Musical KBD. (Cable IN to KBD OUT to record midi and cable OUT to KBD IN to play back midi files) Note: If you have Creative Platinum Sound Card, you do not need Midi Interface cable as the sound card has its own MIDI IN and OUT port. You need only simple midi cable to make connection between KBD and PC.]

No you don't. People frequently make video connections to their receiver, and then from their receiver to their TV, in order to minimize the number of things that need to be switched when changing from one video source to another — a kindness for less technically inclined household members and guests. Of course you'll still need to make an audio connection from your video sources if you want to hear the sound they offer through your receiver and speakers, rather than through your TV.