All vent-free appliances, whether natural or propane, produce water. The accumulation can range from 3/4 to 1pint of moisture per hour in the room. Under normal conditions, this does not cause a problem. However, if you have a problem, you will need to provide an outlet for this moisture. This can be accomplished by providing adequate ventilation or using a dehumidifier to help control the moisture. Yes/No.

Yes. Most building codes allow the installation of a gas fireplace in a sleeping room as long as it is a sealed combustion, direct vent model. Your decision really comes down to whether heat or aesthetics is your #1 priority. If heat is your first concern, or the existing wood fireplace has had a history of downdrafting (smoking), you should purchase a gas insert.

Vent free fireplaces are fireplaces that do not require any type of vent system. Instead, they are designed to burn clean and the combustion by-products allowed to flow into the room the fireplace is located in. Stringent requirements ensure that these fireplaces not only burn cleanly, but that they are located in rooms of sufficient size to ensure an adequate supply of fresh air is always available for the combustion process.

Check with your local codes. If you do not have a code prohibiting it, your heater or fireplace can be installed in your mobile home.

Vent-free gas log sets can be installed in most masonry fireplaces, as long as the set's clearance and ventilation requirements are met. For installation in prefabricated fireplaces or fireboxes, follow the fireplace manufacturer's recommendations, as well as meeting the set's clearance and ventilation requirements. Refer to the log set's owner's manual to determine clearances and unconfined space requirements.

Yes. They can be vented or the damper can be closed and be burned as vent-free for an excellent source of heat.

Yes. Most building codes allow the installation of a gas fireplace in a sleeping room as long as it is a sealed combustion, direct vent model. Your decision really comes down to whether heat or aesthetics is your number one priority. If heat is your first concern, or the existing wood fireplace has had a history of down drafting (smoking), you should purchase a gas insert.

Vent-free logs can be burned in a bedroom as long as they do not exceed 10,000 BTU maximum input. Check local building codes.

Although the frequency of your fireplace servicing and maintenance will depend on use and the type of installation, you should have a qualified Mr. Fireplace service technician perform an appliance check-up at the beginning of each heating season.

No! The beauty of Regency Direct Vent technology is that you do not necessarily need to go up through your roof to terminate the venting. All you need is proximity to an outside wall, the distance to which depends on the model you choose. Not only does this make installation more flexible, but it also keeps the costs down. And with our sleek and attractive patented AstroCap horizontal termination cap, you won't be cluttering up the outside of your home either.

Answer: Vent free heaters may not be changed from one gas type to another. The American Gas Association/Canadian Standard Association certifies the unit according to the gas type used. Changing this type will change the certification as well as void the warrant and most of the time it is more expensive to convert the product than it is to buy a new unit.

A Vent Free fireplace does not use a chimney or flue pipe. These fireplaces burn extremely clean so the byproducts of combustion can be vented back into the room. This eliminates the need for a chimney resulting in lower installation costs. Because they do not send hot flue gases up the chimney, these fireplaces are extremely heat-efficient. All models feature an Oxygen Depletion Sensor for maximum safety. Back to Top

Yes, and they have been used for many years now. Vent free fireplaces come equipped with an oxygen depletion sensor, which will detect any unsafe levels of carbon monoxide and shut the system down. These types of gas logs are also approached by the Consumer Product Safety Commission.

Hoods are designed to deflect heat from wood such as a mantel. Check the installation instructions for your log sets to see if the mantel height requires you to install a hood.

Fires r us given a scoot link for our customers to look for registered gas installers of your area but a more comprehensive list of registered gas installers can be obtained from the council of registered gass installers(CORGI) website and their web address is www.corgi-gas.com and you are advised to look in yellow pages too.Please note that you must get your gas fire installed from a competent corgi engineer.

e are three different terms that represent three different ways of 'venting' a gas fireplace, that is, to supply combustion air to the fireplace and evacuate combustion gases out of the house. In Australia, the term 'open flue' is commonly used instead of 'B-vent'. B-vent means a traditional type 'B', 4' (102mm) rigid pipe used to evacuate combustion gases. It can also be a certified flexible aluminium liner of the same diameter, inserted into an existing masonry chimney or a prefab chimney.