You can, but it is highly recommended that you purchase a matching foundation that is completely flat and is designed for your New Air Bed.

American made springs are manufactured to more exact standards and the material is far superior then that of imported spring steel with the exception of springs made in Canada. In the case of springs, you really do get what you pay for.

No. The slimline letter-box was produced for a very narrow centre midrail frame. If you try to fit one into a standard size 12” letter-box opening it will not cover the aperture (hole cut-out) through the door. They only come in a 12” size and should only be used to replace the same narrow letter-box. Check the sizes before ordering.

The assorted boxes are prepackaged and contain assorted springs from our standard range. Therefore, it is not a specific package based on the customer's requests.

While you can certainly use your existing box spring, we usually recommend that you order a foundation because a foundation is a completely firm and completely flat surface for your bed to lie on. This will ensure that your bed contours completely to you and your body and not to any soft spots of slats in a box spring. We do recommend placing a sheet of plywood over your boxspring if you choose to use it. Waterbed mattresses do not wear out fast like many innerspring beds.

Absolutely. The importance of designing the website to incorporate the image your company wishes to project cannot be stressed enough. It is an important marketing tool that can enhance your company image.

The most defining aspect of Pilates equipment is in fact its use of springs. If you replace the springs with weights, Pilates equipment would be no different than some other equipment found in a gym. The springs also have the ability to provide resistance in one direction and assistance in the opposite direction. The springs encourage eccentric muscle activity which happens when you lengthen a muscle while actively working it.

Shock springs are classified by spring rate, which is the stiffness of a spring, i.e., its resistance to being compressed. A stiffer spring (one with a higher spring rate) will require more force to become compressed, and will release more energy as it rebounds. Using stiffer springs on your shocks will make the vehicle's suspension respond more quickly, but less likely to absorb smaller bumps. Softer springs will respond more slowly, but will allow the suspension to better absorb small bumps.

Yes, but for fruits only! Do not can vegetables or meat in a solar box cooker, since these foods need to be canned under pressure! You'll find information on canning here.

A hard cover travel case costs about $275 from Bike Nashbar or Performance Bicycle mail order companies. Your local bike shop may rent cases, if you prefer to use one, but don’t want to purchase it. For tours that do not begin and end in the same city, there will be a US$30 bike travel case transfer fee. Boxing is inexpensive, but there is some risk of damage to your bike. The most susceptible parts are the front and rear dropouts where the wheel axles attach to the bike.

No, no, no, please don't do this. Yes you will lower the car but the ride will be terrible. There will now be less travel on the springs but at the existing spring rate, thus the car will have a tendency to hit the bump stops. The only way to lower the car is to buy a set of uprated lowered springs. These will have a higher spring rate and so the ride will be firmer but more importantly will not hit the bump stops.

Springs very closely resemble the way the body's muscles move in real life, developing tension while simultaneously lengthening. Use of springs with exercise means no strain on the joint at the beginning of the range of motion and the benefit of a larger amount of resistance at the end of the range of motion.

Our clutches are deliberately as simple as possible by design. For most uses the clutch springs we recommend are the standard ones. We only use diaphragm springs where the original clutch used them; thankfully now Yamaha has reverted to coil springs for the '2004 and on R-1' clutch we only have to deal with a diaphragm spring on the first generation R-1 motors. In normal use, with coil springs, the clutch feels the same as the original.

Since the Spyder has considerable weight in the rear from all the body strengthening, you want to get springs designed for a AWD Eclipse. If you get springs from a FWD Eclipse, you will be sagging in the rear. However, struts (shocks) are the same as a FWD Eclipse. Replace the struts BEFORE or at the same time as your springs. The stiffer springs would wear out your stock struts very quickly.

NIFF represents music using a graphical format. There is no concept of a "C" in NIFF: instead, you determine pitch by its placement on a staff. This type of graphical music representation has a long and distinguished history. It works well for the scanning programs that were the focus of NIFF's work. But it works poorly for many other types of applications, such as sequencing and musical databases.

MiniVend is designed to build pages based on templates, from a database. If all you want is a shopping cart, you probably should use a simpler program. It is not difficult to convert existing static pages to MiniVend, but maintaining them can be a nightmare. Minivend does not require SQL. If you have a small database with no particular desire to integrate your own toolset, you may be more comfortable using Minivend's internal database.

Probably so! Most all IBM compatible equipment is supported by our applications. We support most external modems. KEY-POS also supports most receipt printers, cash drawers, scanners and stripe readers. Most any display pole, which uses the ADEX parallel pass-thru mode, is also compatible.

YES! On bare floors, use newspaper or cardboard as, your birds can slip and become spraddle legged. If per chance one of your birds becomes spraddle legged, fasten a soft cord to one leg at the ankle and also to the other ankle, leaving a space between the legs as it should be. The bird will be able to walk with this support and in a few days the cord can be removed.

Most people end up using the box for between 20 and 30 minutes every morning. Since this does vary from person to person based on the physiology and sensitivity of each individual, you may want to start out with a shorter session. When you get your light box, start with a 10 minute session and work up slowly by adding a couple of minutes every day until you feel that your session time is effective, or until you are within that 20-30 minute range.