The 10-pin header next to the dip switches is a 2nd serial port. You can hook this up to your PC's serial port (with a null modem), and get connectivity that way, utilizing the 'qtalk' app on the i-opener. This seems to support zmodem, but the i-opener doesn't seem to have the sz/rz binaries. If it did (or if you can find/FTP them), it might make an easy way to transfer files to/from your PC.

The PAUM002 only has PS/2 and USB connections. Standard or 3rd party PS/2 to Serial port adapters may cause detection problems and we do not recommend using them. A utility file is available on our website (www.targus.com/support), which will allow you to use the second mouse button and the screen scroller features on your MAC computer. My mouse doesn’t respond correctly anymore - After changing the port it’s plugged into, my mouse doesn’t respond the way it used to. See similar questions...

Yes, because the SignaLink doesn't require a connection to the computer's serial port! Unlike other interfaces, the SignaLink never requires a serial port connection. This is particularly handy if your computer doesn't happen to have one! In addition to simplifying your installation, this feature also reduces the likelihood of the computer's RF noise getting into your radio. It also eliminates serial port related transmit problems that plague other interfaces. See similar questions...

The serial port should be located on the back of your computer. An example of a serial port image is provided here. See similar questions...

Answer: Yes. You will need our USB connector from Agrowsoft if you with to use the USB port. You will need no additional connectors if you use a standard RS232 serial computer port. Answer: You can set up the software so that it sends text messages with both Alerts and a periodic "push" of current conditions. You specify the time interval (for example every 60 minutes). Your environments will be checking in with you rather that you having to check in on them! See similar questions...

No. The serial port and gameport are totally different. Even if you could find a physical adapter they would still not be compatible electronically. See similar questions...

USB to Serial Support - Use a direct/single USB to serial cable, and stay away from multi-port "hubs". Unplug the serial cable to the weather station when changing PC connections, like from serial jack to USB jack. Power down the weather station before connecting the serial cable. See similar questions...

Yes but you must purchase a USB to Serial converter. We have the IOGEAR USB to Serial Port Adapter Model GUC232A available under RIGblaster Accessories. All of the software was written for serial port control so it will not work directly with a USB port. With the USB to RS232 serial adapter you can add the function of a serial port to a computer that doesn't have one or doesn't have and extra one. See similar questions...

By default Solaris only enables /dev/ttya. But the modem is usually on /dev/ttyb (or COM2) if you have a serial mouse. If you don't have a /dev/ttyb file, then you don't have the second serial port defined. To add the second serial port, perform the following as root. For other serial ports and internal modems follow the same steps but uncomment the appropriate line in the asy.conf file. Solaris 2.6: Replace /platform/i86pc/kernel/drv/asy.conf with this: (first backup the existing copy of asy. See similar questions...

A#8.15: This is usually caused by serial port configuration problems. Common symptoms may be: % copycat .ttyco .ttya Error opening tty .ttya, aborting. or % /usr/sbin/getty 8bit.38400 .ttya getty: .ttya: I/O error The first thing to check is that the following GNO serial port drivers exist: /dev/modem /dev/printer Next, ensure the following two lines are in your /etc/tty.config file, and that they are uncommented: modem 2 .ttya printer 1 . See similar questions...

Yes, you can connect LabPro directly to the USB port on your iMac, iBook, G3, or G4 Macintosh computer. You do not need a USB-to-serial adapter. If you are using newer versions of Windows, you can also use USB. Windows 95 does not support USB, but it can use LabPro via a serial connection. See similar questions...

Yes, Windows can handle this and most MIDI applications have a way to select which MIDI interface(s) you want to use. See similar questions...

These operating systems do not support gaming devices through the serial port. It is a publicized limitation of the operating system and cannot be corrected by a driver update. You must use the USB connection only. See similar questions...

The initialization commands for a router are the following.Initial string: AT&FB40 (for isdn 64K) AT&FB0KAS0 (for isdn 128K)Pre initial: AT, Dial up string: ATD, Hang up string: ATH, Escape See similar questions...

Your keyboard will still work if you unplug it from the serial port. However, the Reader in the keyboard will not communicate with the PC if the serial plug is disconnected. Supplementary Blue for Business Cardmembers who wish to use their Smart Card with your Reader and do not have a PIN can obtain their PIN by contacting American Express Customer Service at the number on the back of your Card.They can use your Reader or order their own by clicking here. See similar questions...

If you have a Max FXO unit, you will need to utilize the serial port for the initial configuration of the LAN settings since you cannot connect a standard analog phone directly to an FXO port. See similar questions...

I've connected the USB to Serial adapter but it's on Com Port 5 (or higher) and your software only has Ports 1-4. This issue applies to the c\temp software only. This has been resolved with the new version of the MDAS-Pro software. If you do not have a copy of this software, please contact us. See similar questions...

Some unnamed clone cards have also been known to work, especially those that claim to be AST compatible. USB device support was added to FreeBSD 3.1. However, it is still in preliminary state and may not always work as of version 3.2. If you want to experiment with the USB keyboard support, follow the procedure described below. Add the following lines to your kernel configuration file, and rebuild the kernel. See similar questions...

For Unix, see a Usenet post by Mitch Chapman: http://groups.google.com/groups?selm=34A04430.CF9@ohioee.com See similar questions...