There are many applications that can use an SMS-to-IP gateway. Basically, the objective is to extend to the GSM network the functionality of client/server applications that currently run on IP networks, and to facilitate the access to various resources from mobile telephones that have the ability to send and receive short messages.

a GSM device, Alamin supports GSM modems that understand the extended AT command set and support text mode for sending SMS messages (PDU mode isn't supported at present, but there are plans to implement it) or Nokia telephones supported by the Gnokii project (http://www.gnokii.org). Whichever GSM device you choose, you will need a connection cable to the serial port of the computer. If one isn't available, an infrared port in both the GSM device and computer is needed.

You can integrate SMS into your system using one of our Application Programming Interfaces (APIs). directSMS have a number of APIs in the following technologies: Java, SOAP, HTTP and PHP. All our APIs come with supporting documentation and sample code. For further information, please check our developers page.

In general, a gateway is a program that allows systems using different data formats to connect to each other in as transparent a way as possible. In an SMS message gateway, one end of the gateway is connected to a mobile telephone network, over which SMS messages are sent. The other end of the gateway can be connected to different systems or services. These most commonly include mail systems and IP networks.

No. The TSTT gateway is still down. Messages are being sent via an international gateway. Unfortunately, that gateway only supports Digicel and b-mobile GSM phones, so TDMA cells won't receive messages from this site.

Both of these addresses are automatically assigned when you connect to the .Netcall ADSL service and you should not need to configure these. If you try and set them manually in your modem settings, in all likelihood it will not work and may stop you being able to access the Internet at all. Your permanent static IP address is displayed in the member's area page. Read more about .Netcall static IPs .

If you try and set them manually in your modem settings, it probably won’t work and may stop you being able to access the Internet at all Your permanent static IP address is displayed on the user area page – https://www.exetel.com.au/members/

Once you have logged on and activated your account, select the "Send SMS" menu option. For Australian mobile numbers you must enter the destination mobile number in the standard 10-digit format, i.e. without a country prefix. For international numbers, you must enter the number in the international number format, i.e. the country code (preceded by a "+") and then the mobile number without the leading zero.

No problem, just send an e-mail to sms@pcmeasure.com. Examples are available for integration into various programming languages, so the process should not be time-consuming.

CIMD 1.3, CIMD 2.0, SMPP 3.4, UCP/EMI 4.0, SEMA SMS2000 OIS protocol for SMS centers over Radiopad and X.25 and several modems and mobile phones through AT protocol

When the SMS gateway goes down, there's no notice of when it will be back up. It could be minutes, hours or even days. In rare instances, the gateway could be down for weeks. With over 15,000 messages being sent per day, that would mean queueing up all those messages and retrying delivery periodically until they can be delivered, or until it expires (after 4 days). This would be a huge toll on bandwidth, storage space, and CPU time.

Then modify your notificationCommands.

Unfortunately, Filemaker Pro Server was designed only to recognize the IP address in the TCP/IP control panel primary configuration. It cannot bind to more than one IP address. As far as we know, the FMP developers never considered the dual NIC case. For a shared server/gateway Mac, the only workaround we know of is to point your Appletalk interface at one NIC and use the primary, active TCP/IP configuration for the other.

Standard VoIP port "tcp 1720" is required for most broadband router.But some of the NAT router is not enough to open "tcp 1720" port for Voice communicaiton. You need telephone or telephone exchanger and Ethernet (router to Internet) to talk by phone but through IP network. Please see file for detail setup. But you still need to register a domain name to use. It is possible to get a domain name service with your dynamic IP which is so-called Dynamic DNS. Please see file for detail setup.

You have to install a gateway which handles the translation. Several versions exist which are all based on the OpenH323 and PWLib libraries. The latest recommendation is to use isdngw at: http://www.gnugk.org/h323-isdn-gw.html. This is an updated version of the isdngw located at: http://www.virtual-net.fr/h323/isdngw/, which in turn is an updated version of the Linux H.323 - ISDN Gateway found on http://www.telos.de/linux/H323/. Please note that not all sound cards support full duplex audio.

No, you can use one of many free "soft" phones on our website. Visit our product page and download a choice of your soft diallers.

Answer: Yes, but you must return the products within 15 days of ordering. Buying a product is therefore a minimal risk venture and allows you to affordably try the service. If the unit is a rental, we will refund the $50 Security Deposit, provided that you return the rental unit in working order. Please note that we do not refund subscription fees or rental fees paid. Please click here to see billing and payment policies or click here to see refund policies.

We recommend that you to apply a domain name from the ISP that provided the dynamic DNS. Then Internet visitors can access your gateway with the fixed domain name instead of dynamic IP. See the DDNS screen in the Xwire Management utility.

I am running BlackBerry Desktop 4.0, and my BB 7780 is running verion 3.7. I downloaded the version 4.0 upgrade for the 7780 fro AT&T, and I run the installer successfully. Yet nothing has changed ion the blackberry. I try running App Installer but there appears to be nothing to install.