external piezo whistle rated 3-28 VDC can be connected to the drive alert. Two conductors with 22-24 gauge wire size is adequate for this service. If it is desired to operate the drive alert without the internal piezo whistle, the rear whistle switch should be placed in the OFF position and a jumper wire connected from the front terminal strip +24 VDC position to the C terminal.

The answer is application dependent. If the square wave voltage is low (i.e., less than 30 V), then the answer is usually yes. If the square wave voltage is higher, there is a good chance for shockwave, damage, cracking, reduced life, or other failures. Careful control of the square wave rise time/fall time is the solution.

There is a built-in Hot Shoe in which an optional Safe Sync Hot Shoe to PC Sync Adapter (Item # 200329) can be used to connect a PC sync connector cable. You can locate this item through our dealers, or by the Olympus Emporium.

Yes. Our LCD/TV monitors come with an Audio Output outlet which allows you to connect external speakers to the monitor.

It is possible to damage equipments when playing with PC vidoe hardware and workstation monitorts. If the monitor has standard video inputs, is workign properly, cable is properly constructed and everything is connected to properly grounded power outlet then the risk of damaging the graphics card is minimal. Some monitors can be damaged by sending wrong frequencies to them, so be sure that you send right frequencies to monitor.

Don't expose your laptop to resonating noises, for example loud bass noise from speakers, heavy machinery.

No, not directly. The kit can be modified to drive these transducers. Additional impedance matching circuits have to be added to drive the K & L series transducers. For separate transmitter receiver transducers, the transmit/receive circuitry has to be separated. The kit will drive the 9000 series transducers directly.

Yes, the Mier Products DA-052 wall mount whistle can be used with the DA-500 control panel to sound an alarm in any room (see the next FAQ). However, it may be more cost efficient for you to use the DA-503 or DA-504 models, which bring you more features (such as remote chimes that can be placed in any receptacle in the house and turning on lights) without the work and cost of hard-wiring. Check out the DA-503 and DA-504 information on this website for more details.

See http://openacs.org/forums/message-view?message_id=160743 and http://openacs.org/forums/message-view?message_id=212780

The violet-brown pair on the CO cable. The port does NOT have its own power for an external-paging unit.

You can connect most phones to an external antenna by using an installable hands free kit that comes with an external antenna adapter. You can also purchase an external antenna adapter that allows you to connect the antenna directly to your phone. Some phones have an external antenna port. Other phones require that you remove your fixed antenna and insert an external antenna adapter to that port. Still other phones have no way to connect an external antenna to it at all. Read more here...

The MM2211 does not support an external antenna. The MM2211 uses a combination of vertical and horizontal antenna arrays to maximize connectivity.

If you have your files on an old Mac with a SCSI drive internal or external; and your new Mac does not have a SCSI external connector or use SCSI drives internally, what can you do? I'll discuss many options. My GENERAL advice is as follows. EITHER use some kind of Mac which HAS SCSI to read your drive, and use it to transfer files either by connection or by transfer to another media (floppy, CD, ZIP disk). OR, you add some kind of SCSI hardware to your new Mac to read the drive.

external drive allows you to have your music stored without using up space on your internal drive. It also becomes a medium for storage independent of your computer that is portable. You can plug it to a different computer and have your music instantly available.

In computing, there is never enough space on your existing hard drive. As applications take up more space and with video editing, digital photography, and digital music becoming more popular, there is an increased need for hard drive storage. A hard drive enclosure kit allows you to replace your existing hard drive with a larger capacity drive and recycle your old drive for external storage. External storage kits are also popular for mobile computing.

Any external devices connected which require a separate power source must be connected to our UPS. This requires that we charge an additional $25 per month per device.

A piezoceramic actuator which is cyclically driven at a constant cycle time between the same two points will perfectly repeat its path every time. However, if the cycle time or either endpoint is changed, hysteresis and creep effects cause non-repeatable motions.

All 'watch beepers' are piezoceramic audio transducers, most battery operated smoke detector alarms, fish finders, some cigarette lighters, many gas grill igniters.

Yes you can connect your Xbox to your computer monitor using the 3rd party device called the X2VGA, which supports up to 1080i resolution (the same as the Xbox High Definition AV pack), and a toslink audio connector for Dolby Digital 5.1 surround sound support. Microsoft disables the high-definition video output on the PAL version Xbox(only sold in Europe, Australia, NZ, Hong Kong etc.), so it cannot work normally with the X2VGA. However, the Xbox consoles sold in North America, Japan, etc.

Yes, depending on the capture card. Some of the software only editing solutions require some external hardware. Please ask for the details.