All electrical connections must be made by a licensed/qualified electrician. Check with the regulatory authority in your country.

The garage door opener must be operating from a dedicated mains supply which can be supplied from a regular 13 amp circuit in most cases.

Constant mains electricity is supplied into premises via electrical cabling. When this mains electricity is disrupted due to power failures, a signal is sent from the transfer switch to the generating set which then starts up and sends generated electricity back into the premises. When the mains supply is restored the transfer switch blocks the power from the generating set and reverts back to the main supply.

The ACCUSTAT® is supplied with a 12 V plug-in transformer with a 4’ low voltage cord with a 2 pin connector. Simply plug the ACCUSTAT® into an 115V grounded outlet and it will function.

Sustained Application - Only portable treatment can offer therapy 24 hours per day - which is the most effective way to apply pain relief and healing (ie. at a low intensity over long periods of time). Pre-emptive Treatment - With portable equipment the user can have it on hand to apply stimulation for pain relief before the pain starts. (This is especially true with long term pain that has a predictable pattern of rise and fall.

Most motorhomes have leisure batteries which can service most needs overnight and recharge on the move. Most sites now allow main connectors, for which your motorhome will be equipped.

All Portakabin buildings are fitted with a consumer unit tested to BS7671. A qualified electrician must connect the consumer unit to a mains supply. We advise you to contact your communications systems provider to arrange connection to computer and telephone systems.

you may guess from our location most of our work is in North Wales, the North West and Midlands of England. But we are prepared to work outside that area, especially if you have a local architect or surveyor involved who can provide us with the necessary local information.

This is included in your pool application fee, see the diagram included in the pool permit package for information

Remember the voltage is 220 Volts in Europe. You will need a voltage converter and adapter plugs for all electrical appliances. Check with the labels on your electronics items, many will be dual voltage- laptop computers, video chargers, etc... Back to top

Electricity is produced as the magnets of the rotors spin past the stationary wiring of the stator. This concept was discovered by scientist Michael Faraday in 1831 when he found that electricity could be created by rotating magnets within copper coils.

All of our kits use mains transformers with multi-tapped primaries that can be configured for use with many different incoming mains voltages. The most common of these are: 100v, 110v, 120v, 220v, 230v, and 240v. Standard mains frequencies too are not a problem.

a) Many of the water mains in this country are cast iron. The older ones are unlined and they have corroded, especially in areas where the water is soft. The iron corrosion particles (rust) become loose and can be picked up by the water. b) In some areas, iron and manganese are present in the source water. Inadequate treatment in the past may have resulted in iron, manganese and other deposits forming in the mains.

There are many forms of noise that a hifi or AV system can produce. If the actual pieces of equipment are buzzing this is generally one or more of the following; poor transformer design or construction, poor mechanical mounting, over voltage supply, significant distortion of the supply or DC present on the supply.

Electrical installations in Portakabin buildings are designed and installed as permanent installations. A qualified electrician must connect the consumer unit to a mains supply. We advise you to contact your communications systems provider to arrange connection to telephone and computer systems.

By using a filter you will reduce the amount of debris that may block the spray head and change that pattern of water.

Yes. The 12355612 fuel pump can be turned (clocked) to any one of ten different positions. Simply remove the ten bolts that hold the pump halves together, orientate the pump to the desired position and reinstall the bolts to the proper torque.