Novus Plastic Clean and Shine cleans, shines and protects your framing acrylic. Our acrylic cleanser is antifog, antistatic, dust repellent and can be used on any plastic surface.

Yes. A spray or hose pipe should be used to rinse off dirt, as It is important to make sure that the window is free from dirt and grit before attempting to wipe with a cloth or sponge.

New Pledge® Multi-Surface Clean & Dust™ Spray and Wipes can be found in your supermarket or Deep Discount Stores in the Home Cleaning Aisle NEXT to other Pledge Products, in the furniture care section. Pledge® with Orange Oil has a convenient trigger sprayer. Hold the container upright and spray directly onto the surface. Using a dry cloth, rub along the grain of the wood. Wait 30 seconds and then wipe off excess to create a deep, clean luster.

Mild soap and warm water with a soft cloth (no paper towels) works just fine, or you can purchase a product designed for cleaning acrylic such as Novus or Brillianize. Do NOT use alcohol or ammonia based glass cleaning products like Windex, regular use will ruin the cases. ButterflyUtopia.com is not responsible for damage done to the acrylic cases by improper cleaning.

The surface will be kept well if vacuum cleaned with a soft nozzle. If necessary wipe the stove with a moist cloth, but only when the stove is completely cold. Be careful when choosing cleaning materials as the paint may be damaged by acid. If necessary, use mild detergent or brown soap. The painted surface may in the course of time get a grey tinge; but the stove can easily be freshened up with a special heat-resistant spray-paint, which can be bought from your dealer.

Again, very easy. Just clean with water or a damp cloth. Make sure there is no residue of Eco Solutions' products trapped in any corners or cracks - make sure these areas are cleaned thoroughly with water. Leave the surface to dry naturally, as forced drying (e.g. with a dehumidifier) is likely to crack and warp wood. Do not dry in strong direct sunlight or next to a heat source, since this is also likely to crack or warp wood.

bull; Do not spray any liquids on the LCD screen directly, and do not use paper towels, this can cause the LCD screen to become scratched. bull; Always apply the solution to your cloth first, not directly to the parts you are cleaning. You want to avoid dripping the solution directly into your computer or laptop. bull; Stroke the cloth across the display in one direction, moving from the top of the display to the bottom.

Bleach and water, or TSP and water, work well on most surfaces. Follow manufacturer's instructions and do not use on aluminum. Surface should be broomed or blown clean prior to washing.

If you do get some residue, usually you will find it much easier to clean up than residue from conventional duct tape. It tends to remain soft rather than drying hard. 3M™ Citrus Base Industrial Cleaner is a great choice for removing any residue that might occur.

Yes. Provided that the old paint coat is stable and not flaking, free of dirt, dust, grease and soluble salts, the limewash will adhere to previous paint coats. For interior surfaces we recommend you undercoat with BAUWERK Acrylic Primer Coat before applying limewash. This will prevent inconsistencies from passing through the old paint coat and affecting the limewash finish.

this substrate is virtually self cleaning it should not require cleaning. If it does require cleaning due to a heavy deposit of soil, a simple wipe with a damp (water only please) sponge or rag is required.

This depends on how the plate is being used. If possible, we recommend cleaning the plate at the beginning of the day (or work shift) and again at the end. If the plate becomes soiled, particularly with oily or sticky fluids, it should probably be cleaned immediately. Clean the plate regularly with Tru-Clean or Rahn Waterless surface plate cleaner. The choice of cleaning solutions is important. If a volatile solvent is used (acetone, lacquer thinner, alcohol, etc.

Stainless steel hoods should be washed regularly with a clean cloth, warm water and mild soap or dish detergent. Clean in the direction of the polish lines. Rinse well with clear water and wipe dry immediately. You may wish to apply light oil used for furniture polishing to emphasize its bright finish. Wiping regularly with mild soap/detergent and warm water should protect painted hood surfaces. Be cautious about using "New and Improved" cleaning agents.

YES. Cleaning the item's surface with the Alcohol Cleaning Swab is a critical step in the STOP Security Plate's installation. A clean surface ensures a uniform, permanent bond between the Plate, the "Stolen Property" Tattoo and the surface. DO NOT SKIP THIS STEP even if the item is brand new or appears clean. The surface may still have a mold release residue that will affect the performance of the Tattoo Activating Gel.

Acrylic is the most commonly used material in traditional domed curb mount and self-flashing skylights. It comes in a variety of tints and is an extremely reliable material for use in a wide range of shapes and sizes. It can be formed into domes, circulars, pyramids, ridges, etc...

No, Quartz Surfaces, also referred to as Engineered Stone is over 11 years old. It has been tried and tested to be a superior product.

No. All the old seams will be sealed under the new surface. You will have a solid surface finish. That's just one of the advantages this surface has over new laminate tops.

Your new surface gets extremely hard. It's made to wear just like other solid surface finishes. It is scratch resistant, although, like any new counter surface, we cannot guarantee against scratching. It takes about 30 days to reach it's full strength, during this time extra caution should be taken to prevent scratching.

It’s Easy! The comprehensive Guidebook contains information on the rules and regulations that apply to marinas as well as a list of voluntary BMPs. Download a copy of the Guidebook from this website or contact Mike Danko, NJMSC at 732-872-1300 ext 29 or via email mdanko@njmsc.org or Tali Engoltz, NJDEP at 609-633-2201 or tali.engoltz@dep.state.nj.us for a free printed and/or CD-ROM version of the Guidebook.

Yes, Decorative Concrete of Maryland’s overlays are applied to any stable concrete slab or wood substrate.