CosmoPBX is bundled with Latest Asterisk 1.4 and Asterisk-GUI beta. You can configure asterisk from web based interface of Asterisk-GUI from web browser. Use following urls to access Asterisk GUI configuration tool. http://[YOUR IP HERE]:8088/static/config/cfgbasic.html (For basic configuration) http://[YOUR IP HERE]:8088/static/config/cfgadvanced.html (For advanced configuration)

First, download and install Asterisk from www.asterisk.org. To build/install, I used these commands (see their README): make make install make samples I then added these lines to /etc/asterisk/sip.conf: ; Grandstream [1001] type=friend host=dynamic ; cisco phone [1002] type=friend host=dynamic Then I added these lines to /etc/asterisk/extensions.conf: exten => 1001,1,Dial(SIP/1001,200,tr) exten => 1002,1,Dial(SIP/1002,200,tr) My phones register as phone numbers 1001 and 1002. See similar questions...

Once you have configured your account for a specific domain name for email service, you need to make sure your domain name is configured to utilize the TurnKey Mail servers. This is done through specific domain name configurations, called MX (Mail eXchange) records. When you purchase a domain name, through a registrar, you typically have access to a specific control panel where you can configure your domain name. You will need to configure your domain name to have 1 MX record (i.e. See similar questions...

The DHCP Server Service is configured using "DHCP Manager" that is installed after the installation of the DHCP Server Service. Exclusion - start and end, e.g. 200.200.200.20 and 200.200.200.30, would mean available addresses would 200.200.200.10-200.200.200.20 and 200.200.200.30-200.200.200.100 A message that the Scope has been added, but is not active, would you like it to be active, click Yes. See similar questions...

And then add these lines to the bottom of the sip.conf file (obviously, in both of these, you need to replace <username> with your username and <password> with your password. You could also add contexts to handle dialing other things if you wanted. If you wanted a catchall extention to handle ALL calls and sent them to IdeaSIP, you could have something such as: You would then need to add a sip. See similar questions...

While our prompts have been chosen to fully support the native features of Asterisk, they can in principle be used with any PABX system. If your PABX has similar features to Asterisk, whether it be hardware or software based, our prompts can in theory be used as long as you know how to import the prompts. See similar questions...

For its sesquicentennial (150th anniversary) in 1998, CCCH commissioned Sir David Willcocks to write service music; it is music sung only at CCCH. The music is available on the blue page in the pew. See similar questions...

In the same way that Linux is an open-source computer operating system, Asterisk is an open-source IP PBX. Like Linux, Asterisk has an enthusiastic developer community committed to improving it. It is available on a large number of platforms, including Linux, Mac OS X, OpenBSD, FreeBSD and Sun Solaris. Asterisk is free, can interoperate between VoIP and traditional PSTN systems, and supports the protocols these two systems use, including H. See similar questions...

If you choose not to use VPN from off-campus and still want to send email through your own broadband provider, you will need to configure your mail client settings as described in the document Configuring Eudora Email When Off-campus. Suggested settings for Verizon and Comcast Cable broadband customers are included in that document. See similar questions...

Connect to the router through web browser. Set the broadcasting IP address and Port, select TCP-IP protocol. How to ... If you hear nothing from your broadcasting page, check the 'Tools > Internet Options > Advanced > Java (Sun) > Use JRE v1.x.x_xx for <applet>' option in MS Explorer. If there is no such option or if the JRE version is lower than 1. See similar questions...

If you have a technical problem with a ISP or other service provider you will need to contact them directly. We have provided common links here. See similar questions...

You configure each section (numbered 1-10) by pointing DSpy to the proper directory on your network. By putting a shortcut to DSpy in your startup folder, it will start with your TSC client during every boot/login and automatically start tracking your TSC progress. See similar questions...

A Detailed instructions are available in Section 6 of Internet Texoma's How To directory on this site. See similar questions...

If the adaptor used is JDBC, then you can set the type of JDBC driver (depending on the Database you wish to support), the location of the database, the login name and password and the size of the connection pool for the database. The configuration settings are kept in a property file. The file can be specified at the command line when starting up the Naming Service. See similar questions...

If you have a simple stereo soundcard, select in the Audio Configuration panel, the Split mode and the External mixer checkboxes. You will have: deck A on left mono channel and deck B on right mono channel. Buy (if you don't have) a cable with a stereo plug-in at one end (plug it into the soundcard output), and 2 mono plug-ins at the other end (plug them into the mixer's inputs). See similar questions...

Many antivirus products automatically intercept email traffic to your computer with no changes required to your email programs. However, many still use a "proxy" mode, similar to how K9 operates, that requires changes in your email program settings to tell it to use the antivirus program to check your emails. See similar questions...

The optimal way to connect to the GET Trader is through port 1001, to check your connection settings in the GET Trader, please do the following: You can test connectivity through port 1001 on our port test page by pressing the "port test link". If everything is ok, you should get "You have reached the trading system port test page using TCP port 1001". See similar questions...

The only information that you require from your ISP is your static IP address if applicable. If your ISP allocates you an IP address via DHCP then this is configured automatically. See similar questions...