No. People enter the UPC bar code number in the search box at keyword.com, click 'GO', and go direct to the web page the bar code owner has associated with that bar code.

You don't need a bar-code scanner to run RetailEdge effectively. Scanners will speed up entering items at the point-of-sale and may reduce errors, but you do not need one. If you determine that you would like a scanner, there a number of different types you can choose from. CCD (Charged Coupled Device) Scanners. These are very inexpensive but are not as effective at reading barcodes on uneven surfaces. However, they are typically more durable than a laser because they have no moving parts.

Yes. The first character is the number system, the last is the check digit. To program the Cordless System to drop these characters, turn to UPC Selection under Retail Symbology in the Cordless System Manual. To drop the Check Digit Scan the Don't Transmit bar code located next to the Check Digit heading. To drop the Number System Digit, Scan the Don't Transmit bar code next to the Number System heading. You will need to repeat this process for each variation of UPC A and UPC E.

Yes. The first character is the number system, the last is the check digit. To program the 5700 to drop these characters, turn to UPC Section under Retail Symbology Selections in the Users Guide. To drop the Check Digit scan the Don't Transmit bar code located next to the Check Digit heading. To drop the Number System Digit, scan the Don't Transmit bar code next to the Number System heading.

You FIRST contact the Uniform Code Council at 1-937-435-3870 for an application. This organization monitors the UPC program and assigns and tracks the numbers.

The UPC BarCode Format is the standard BarCode Format for items that are for sale to the public. Probably the largest user of the UPC code is your local supermarket. The UPC BarCode Format is used to encode a 12 digit number. The first number is the number system character, the next five are the manufacturer number, the next five are the product number, and the last digit is the checksum character.

BarCode Wands are the most popular BarCode readers or scanners, due to their low cost. Wands are manually moved across BarCodes to perform the reading function, hence their classification as "contact" scanners. BarCode Wand are extremely simple to use, but require users to keep a reasonably constant scanning motion across the BarCode, and a flat surface behind the BarCode to support the pressure applied by the operator during the scanning motion.

BarCode Laser Scanners are faster and easier to use than Wand or CCD Scanners. User simply holds the Laser Scanner above the BarCode, and pulls the trigger button. Laser scanners typically read BarCodes from near contact to 12 inch distance (some models up to four feet), hence their classification as "non-contact" scanners.

BarCode CCD Scanners are faster and easier to use than Wand Scanners. User simply holds the CCD Scanner slightly above the BarCode, and pulls the trigger button. CCD scanners typically read BarCodes from contact to about one-half inch distance, hence their classification as "near-contact" scanners. BarCode physical length must be considered when using CCD BarCode Scanners, as the complete BarCode must be covered by the CCD scanner optical head.

Yes. Visit www.buyabarcode.com or other site authorized to resell UPC bar codes and purchase your code. They should send you an image file, along with your bar code number, that can then be placed into your artwork image. Be sure you keep your artwork at the same resolution as the bar code image so that the size stays consistent or it won't scan properly. If you would like us to insert your bar code image for you, we are happy to do this for a small additional fee.

The people you tell. You can use your bar code at keyword.com for consumers, retailers, distributors, or anyone else in the supply chain to send them to password and non-password protected web pages by entering the bar code. Most will only know to enter your specific bar code if you tell them to.

the bar code owner, you tell them to do so by phone, word of mouth, at point of sale, in printed materials, advertising, stickers on packaging or inserts in packaging, and any other media. All that needs to be communicated are the words 'enter the bar code at keyword.com'. You may choose to elaborate on this - or not - as you see fit.

If you have not yet purchased a bar code scanner, by all means get a keyboard wedge interface. If you already have a serial interface scanner, you can still get it to behave as a keyboard wedge type. In the Office's Product1 database table (File, Open Database Table, Product1 or click the yellow folder with the P1 on it). Check that the Type Code Field is zero (0) for a product (services do not reduce inventory quantities). Also check the Kit/Carryalong Field.

Answer: The scanning device you would use is very dependent upon your application. If you are only scanning paperwork, a very good and economical scanner is a wand. A CCD (charge-coupled device) is also a good solution, a bit more costly, but much more flexible in its use. If you are scanning at distances from 6 inches and more, a hand-held laser scanner would be appropriate.

Yes. The first character is the number system, the last is the check digit. To program the scanner to drop these characters, turn to UPC Section under Symbologies in the Users Guide. To drop the Check Digit Scan the Don't Transmit Check Digit bar code located under the Check Digit Heading. To drop the Number System Digit, Scan the Don't Transmit Number System bar code under the Number System Heading. You will need to repeat this process for each variation of UPC A and UPC E.

Yes. The first character is the number system, the last is the check digit. To program the 8300 to drop these characters, turn to the Code Selection (Retail) page in your programming menu. To remove the Number System, Scan: Enter, I, F, 1(No) Exit. To remove the Check Digit, Scan: Enter, I, E, 1(No), Exit. How do I make my IT4400/4410 work with a notebook computer? I do not want to use an external keyboard. The scanner needs to know that there is no keyboard.

Yes. The first character is the number system, the last is the check digit. To program the 3400 to drop these characters, turn to UPC Selection under Retail Symbologies in the Operating Guide and Programming Menu. To drop the Check Digit Scan (1) Enter, (2) UPC Selection, (3) Check Digit Transmit, (4) Disable, (3) Number System Transmit, (4) Disable, (5) Exit.