Ans: Complete instructions are included with every order. The ceramics are a very fine powder and blend into paint quite easily with a simple stirring using a paint paddle. The addition of ceramics to your paint will thicken it slightly and you may have to add a little water ( up to 1 pint ) to bring the paint back to a useable consistency. We recommend thinning with our Acriflow, the latex paint reducer/enhancer that turns any paint into a "Super Paint".

Answer: Complete instructions are included with every order. The ceramics are a very fine powder and blend into paint quite easily with a simple stirring using a paint paddle. The addition of ceramics to your paint will thicken it slightly and you may have to add a little water ( up to 1 pint ) to bring the paint back to a useable consistency. We recommend thinning with our Acriflow, the latex paint reducer/enhancer that turns any paint into a "Premium Paint".

Ans: The insulating additive will help keep the deck cooler while providing a slightly slip resistant surface.

Answer: The insulating additive will help keep the deck cooler while providing a slightly slip resistant surface.

Answer: Packages are pre measured for 1 Gal, 2 Gal and 5 Gallons of paint. Money saving bulk packaging is available also. You can figure on an average coverage rate of 250-300 sq. ft. per gallon for most house paints on smooth surfaces.

Ans: Packages are pre measured for 1 Gal, 2 Gal and 5 Gallons of paint. Money saving bulk packaging is available also. You can figure on an average coverage rate of 250-300 sq. ft. per gallon for most house paints on smooth surfaces.

You may mix any of our urethane clears into the final coat of an ULTRA-GLO acrylic urethane paint job. Doing so is a quick and easy way to improve the gloss and long-term durability of the paint finish, without having to apply a full clearcoat. It should be noted that this is not as effective as applying a full clear coat. Kirker’s ULTRA-GLO acrylic urethane paint is completely compatible with all of our urethane clear products, so they will work together in any mix ratio.

Answer: Yes! Simply remove all filters from your spray equipment (or they will strain out the additive) and use a slightly larger spray tip than normal. Recommended tip sizes are .019 - .025. Wagner spray equipment (the "power painter" handhelds) and power rollers will not work as they do not produce enough pressure. Airless paint sprayers, from any manufacturer, that will produce at least 2500 psi and support the tip sizes listed will spray the material quite easily.

Answer: A paint coatings ability to breath is known as "Permeability" which is a measurement of the rate that water or vapor will pass through a membrane. Ceramic filled paints do not restrict a paint coatings ability to "breath.

Answer: A lubrication oil consists of two major parts: BASE STOCK ( or base oil ) and ADDITIVE. The base stock is primary lubricant, and can be petroleum or synthetic. Additives perform three basic jobs, CLEANING the engine by reducing deposits and holding solids in suspension, ANTI-CORROSIVES, which neutralize acids, and ANTI-WEAR additives, which plate or coat metal surfaces to help reduce wear.

Generally walls will require 3000 psi concrete or as specified by your engineer or code. Maximum aggregate size is 3/4" and placed at a 5-6" slump.

Unfortunately, some cologne bottles are factory sealed. If you can not open your cologne bottle, you may spray your cologne into a smaller bottle and then mix it with 'MaxPheromone Fragrance Additive'. Or you may also consider purchasing our 'INVISIBLE' 10ml spray product. It is unscented, to be used by itself without mixing, or you can spray on 'INVISIBLE' after applying your cologne. ATTENTION: Click HERE! for FragranceX.com - Get up to 80% off BRAND NAME perfume and cologne!!! WOW!!!

additive is an extraneous substance that is added to a substance in very small quantities to enhance the existing properties of the substance, to impart some desirable properties to the substance, or to supress certain properties.

There are times when you might want a solid black for a specific effect, but on the whole I prefer to mix blacks for livelier color. Neutral tube colors, such as Lamp Black and Ivory Black, seem very dull, especially next to high intensity hues in a painting. It's important to use the colors in the mixture throughout the picture for the sake of harmony. One mixture that makes especially rich, transparent darks and blacks is Alizarin Crimson and Phthalo or Winsor Green.

Oil-based and acrylic paints cannot be mixed. Acrylic paints are water-based. There is a new type of paint out now, called alkyd paint. Although it is water-based, alkyd paint can be used with oil paints. You can never paint in acrylic over a painting previously done in oil paint. You can, however, paint with oil paint over an acrylic painting.

Answer: The ceramics are not crystal clear and thus impart a slightly "milky" look when used with clear finishes. This is not so obvious on light colored roof shingles or wood stained finishes. Our best advice is to mix in the ceramics a little at a time until you reach a finish that is acceptable.

Answer: I paint for private birthday parties, country clubs, fairs, and festivals. Body painting is a fantastic way to draw a crowd at trade shows and concerts.

Answer: Actually I don't use paint at all. All my work is done with professional grade makeup that is FDA approved to be used on the body. I learned how to paint with Snazaroo, but found I preferred the consistency of Mehron's Paradise line, the neon or day glo colors you see in my work are made by Kryolan.

Answer: If your shutters are color clear through, we do not recommend that you paint them, as you will void your warranty. It is difficult for the paint to adhere to the polypropylene product. (top)

Answer: Yes, otherwise the shutter will turn a greenish/brown color, and it will deteriorate as well. (top)