Oil-based and acrylic paints cannot be mixed. Acrylic paints are water-based. There is a new type of paint out now, called alkyd paint. Although it is water-based, alkyd paint can be used with oil paints. You can never paint in acrylic over a painting previously done in oil paint. You can, however, paint with oil paint over an acrylic painting.

In the satin and gloss finishes which are commonly used on woodwork, oil enamels traditionally exhibited a richness, touch and leveling ability which was unmatched by waterborne paints. However, with the introduction of Eco, many professional painters and designers believe they have discovered an odorless, waterborne alkyd, which can be used interchangeably with traditional Hollandlac oil enamels. See similar questions...

Oil paints, which have been in use since the 15th century, use oil as the medium to bind the color pigments together. They were the dominant medium used until recently, when acrylics were developed (in the 1960's). Oil paints have the following characteristics: they generally are slow-drying; they tend to be richer and more luminous on the painted surface; and if applied correctly, will last many, many years. See similar questions...

The Allback linseed oil paint is very easy to apply. No specific priming is required, although a first coat of the cleaned, boiled, linseed oil is recommended when the wood surface is very dry. This will make the linseed oil paint dry evenly. We have a "one can" paint system: you choose the shade and paint with the same paint outdoors and indoors for all coats without any addition of any solvents. This system means there are no leftover remains of special primer or top coats. See similar questions...

Absolutely. POR-15 will accept all paints, including lacquer-based paints. POR-15 Tie-Coat Primer is the best prime coat to use before topcoating POR-15. Be sure to read thoroughly our directions and tip sheets regarding topcoating before using POR-15. See similar questions...

Linseed oil paint will actually never fade. Earth pigments are used in linseed oil paint. The linseed paint will dry out over time and may look faded. This is because wood will absorb the oil into the grain leaving the pigment to dry out. This is very easily and inexpensively corrected by applying the cleaned boiled linseed oil or the linseed oil wax every 5-10 years. See similar questions...

When modern paint manufacturers try to handle an organic, living material like linseed oil according to the same production principles used in producing cheap, chemical-based paints, the results are disappointing. Over the last 50 years, the handful of paint companies that have become dominant in the industry, instead, prefer to push Alkyd and Acrylic, water-based (plastic) paints on consumers. See similar questions...

Oil painting reproductions are hand made recreations of original paintings. The originals are made by well-known and respected artists such as Van Gogh, Monet, Picasso and many more. Reproductions allow you to own a replica of a masterpiece that only the very rich could afford. Many of the originals could only be found in world famous art museums. A reproduction is your chance of owning magnificent art at an affordable price. See similar questions...

Not if the emulsion is well hardened, washed and dried. If in doubt, a coat of water-based polyurethane to promote adhesion is a good idea (coat thinly to avoid streaks.) Or you can use Marshall's photo-oil paints. The unexposed areas will stay clear while the exposed areas will turn black, depending on the degree of exposure. If a toner like Polytoner is used, the unexposed areas will be clear and the exposed areas will become the selected color. See similar questions...

Yes. Eurolux House Paint is suitable for all wood exterior surfaces. Many clients, however, prefer to use Hollandlac or Eco Brilliant Enamel on doors and shutters. We have seen a great deal of damage done over the years by power-washers, and we do not recommend their use except in the hands of professional house washers, operating from ladders or boom trucks. See similar questions...

acrylic topcoats are typically the best due to color retention properties and flexibility. It is important, however, to use an oil based primer before using the acrylic topcoat when painting over bleeding woods like Redwood or Cedar. A complete acrylic system may be used on all other non-bleeding woods. See similar questions...

Yes, however you may find you need to use the solution (80% boiled linseed oil and 20% mineral turpentine). Sometimes acrylic paint has been painted over old layers of oil-based paint, and again using the solution will usually enable this to be removed using the Speedheater Method?. See similar questions...

It is very easy to paint and clean up using these paints without having to use turpentine or other potentially hazardous solvents. Using mineral spirits for clean-up is a more involved process and includes concerns about disposal of the hazardous solvent at the end of the painting period. The paints seem highly pigmented and have that nice buttery quality found in traditional oils. See similar questions...

There are buildings in North America and Europe that have been known to have linseed oil on the exterior from 300 years ago. They are still intact today because of the linseed oil's ability to prevent water from soaking into the wood surface. Because the organic, cleaned, linseed oil is very close to the natural oil in wood, the linseed oil has an exceptional ability to preserve wood over a very long time. See similar questions...

Ans: Complete instructions are included with every order. The ceramics are a very fine powder and blend into paint quite easily with a simple stirring using a paint paddle. The addition of ceramics to your paint will thicken it slightly and you may have to add a little water ( up to 1 pint ) to bring the paint back to a useable consistency. We recommend thinning with our Acriflow, the latex paint reducer/enhancer that turns any paint into a "Super Paint". See similar questions...

You may mix any of our urethane clears into the final coat of an ULTRA-GLO acrylic urethane paint job. Doing so is a quick and easy way to improve the gloss and long-term durability of the paint finish, without having to apply a full clearcoat. It should be noted that this is not as effective as applying a full clear coat. Kirker’s ULTRA-GLO acrylic urethane paint is completely compatible with all of our urethane clear products, so they will work together in any mix ratio. See similar questions...

Yes. Masterson's Acrylic Palette Paper is designed to be strong, even when wet. You can mix and blend directly on the paper. See similar questions...

Customer provide photo or painting sample, we paint according to it. If there is special requirement, please indicate and we will confirm if we can satisfy you. After finishing, pictures will be taken for customer's verification. If anything need to be modified, we will correct until customer is satisfied. See similar questions...

Yes. We have a wide selection of paintings in stock, or you can custom-order any image in any size you want, always with the security of our money-back guarantee. For custom orders, our Master Artists will work from any color copy with which you supply us to create a beautiful hand-painted canvas that you will treasure for years to come. See similar questions...