Maybe. A good test to see if it's needed, is to stand the rifle vertically, lightly place your finger between the barrel and forend, and loosen off the front guard screw. If you can feel movement between the barrel and forend, then the stock needs to be bedded to the action. A better test is to use a dial indicator between the barrel and forend. When the front guard screw is loosened, the indicator should move no more than .002".

There is an advantage to both the aluminum unit will be lighter weight, the fiberglass is more durable and certainly easier to repair when damaged. You'll find the fiberglass is also much easier to clean. See similar questions...

Fiberglass ladders are extremely strong and long-lasting, and are primarily used for electrical and heavyduty projects. Aluminum ladders are sturdy and suitable for heavy-duty projects; however as with any metal ladder they can conduct electricity and in general are not recommended for electrical work. Learn more. See similar questions...

KiwiGrip can be applied over all surfaces providing they are primed and finish coated. Once finish coated, lightly sand with 120 grit, mask out, and then apply KiwiGrip. It is very important that all paint films have been applied and completed before KiwiGrip is applied to selected surfaces. See similar questions...

All boats have benefits. One of the things that frustrates boat builders is that unlike cars almost all boat buyers are different than all other buyers and we could design a different boat for every buyer. For some folks a fiberglass boat might be the best choice. Buyers who choose aluminum typically opt for economy, simplicity of design, ease of customization and rugged constructon. See similar questions...

A.Fiberglass is the first barrier to heat gain. A 1/8-in. thick fiberglass exterior panel is also much easier to repair and is a barrier that is impervious to moisture. See similar questions...

Both have their advantages... the aluminum is lighter but the fiberglass is more durable and easier to clean. SERVICE QUESTIONS: See similar questions...

Fiberglass is a cloth made out of thin glass threads. It is used to reinforce plastics and other materials. FIBERLAND uses fiberglass to manufacture all our plastic products. Therefore the correct name for the material we use is FRP (Fiberglass Reinforced Plastic), although our products are said to be made of fiberglass. See similar questions...

AudioFormz enclosures are extremely well made and are made of 100% solid fiberglass that is approximately 3/8”-1/2” thick! See similar questions...

Blankets are provided. Linen is provided as an optional extra (you can bring your own) as shown in the price list. See similar questions...

Everything but the main body shell of the FIA is done in-house. We built all the molds from our own plugs. All door pieces, hood and trunk lid, and inner panels are hand laid at E.R.A. Mating of the inner panels to the outside skin is also done in-house. We don't use ordinary polyester resin, either. We spend a little extra money to get low-shrink tooling resin for better long term dimensional stability. Dealer information E.R.A. has a very limited network of dealers. See similar questions...

It is an asphalt shingle consisting of a layer of fiberglass to resist rotting, warping, curling and fire and helps to seal out rain, sleet, snow and ice. Penfolds, as well as installing your new roof , we want to make sure your roof lasts for years to come. Follow these tips to achieve optimum performance from your roofing system. See similar questions...

The answer is yes, for optimum performance, any time different friction materials or discs are introduced, a bedding procedure should be carried out. Drive the vehicle to a remote area and perform at least 30 brake applications of 3-second duration. Use light/medium deceleration with varying starting speeds. Leave at least ½ mile between each brake application. See similar questions...

To block a user, right-click on their name in the contact list, find the Visibility submenu, and select the "Blocked" option. Any messages from the selected user will be destroyed and you will not receive messages from this user unless you un-block them at a later time. Blocked users will always see you as offline, and you will always see them as offline. Blocked users are also noted in bold on your contact list. See similar questions...

A 4.0L block from any year will do. Although blocks from '96 onwards have thicker main webs and a main bearing cap girdle to increase bottom end rigidity, the reduction in noise/vibration/harshness (NVH) is small and the AMC/Jeep I6 engine still remains gruff and unrefined. If you want refinement, buy a Lexus! See similar questions...

Yes. You can block someone from sending you messages through Reactee or getting your shirt's response by sending a text message to 41411 with the word BLOCK followed by their 10 digit cell phone number, e.g., BLOCK 4155551212. To unblock someone send a message to 41411 with the word UNBLOCK followed by their phone number. See similar questions...

No, in fact, we would recommend against plating aluminum wheels. At any time, a rock pit, scrape or deicing/harsh chemicals can break the seal between the plating and the alloy, allowing corrosion to start, resulting In bubbling under the chrome surface, then ultimately peeling. Solution, those wheels can be polished to as good or better of a finish than chrome, and with a little bit of maintenance, they can be kept that way. See similar questions...

We designed our aluminum rings to have all of the same great characteristics of our nylon rings. They are smooth, strong, safe and weld-free. They are lightweight and come in nine great colors. The nylon and aluminum rings come in slightly different sizes. The nylon rings are thicker, and easier to adjust. The aluminum rings are grippier, and fancier looking. The colors are slightly different. The nylon rings are slightly more durable. See similar questions...

Though we touched on the subject at the beginning of the FAQ’s, you will find this is no longer a popular option as the handling of messy, used filters combined with the cleaning process turns off most people. Reusable filters must be cleaned and maintained as much as 2-3 times more frequently than disposable pleated air filters. Pay special attention to the removal of all moisture before reinserting the reusable air filter back into the HVAC system. See similar questions...