Its up to you. Sometimes grass will actually clean the bottom of the bounce house. If the grass is really nice it's not as necessary. Though if you are training employee's you should get them in the habit of ALWAYS using a tarp. Because when it comes down to it, they won't care about your bouncers as much as you do. Eventually they may get lazy and not use the tarp which could result in damage.

You can adjust most of the Folding Plans to use existing grommets. Hardware and Camping stores will have grommet kits, but ask if they have 'Tarp-Clips'. Tarp-Clips go by a variety of names, but they are reusable, and can go anywhere on a tarp without making holes! Larger Tarp-clips are stronger, as they 'grip' more of the tarp fabric than smaller clips. You might even be able to hang the tarp over poles and ropes, and secure it where you can.

We offer tarp patch kits, these have the tarp material, cleaner and the proper vinyl glue. Some supply stores also carry vinyl glue. Make sure the glue is specific for vinyl. [ Back to top ]

The TARP Arrays are designed to maximize the archival tissue that is obtainable for construction of the arrays. We aim to present statistically relevant numbers of tumors that will allow an investigator to screen potential targets. We consider the TARP Arrays a screening tool. They allow investigators to ask simple questions about pattern of expression, differences between tumor types and such.

Silver. Why? Because the silver is made with a black mesh type material then laminated with silver on both sides. The silver does not allow any light to pass through. White and stripe tarps are translucent. This means that light (not actual rays) will pass through. You will get the natural light. Shade netting provides 73% shade and does allow water to pass through. I just purchased one of your 10x20 canopies and I pulled everything apart and I have a 12x20 tarp size. I think that this is wrong.

Tarp-shelters are simple shelters made from a Vertical Support System, rope, ground stakes, a single tarp (fabric or plastic), and ingenuity.

Warning: These building connectors are component parts for use in assembling portable or limited use structures only. Severe physical injury or death may result from the collapse of a structure which fails to use the proper component parts, is not properly anchored, or which lacks proper foundation support and structural integrity to withstand wind, rain, other weather related factors, and stress from the particular use. DTP, Ink, shelters-to-go.

TO REMOVE THE OLD TARP, REMOVE THE PULL BAR FROM THE END POCKET AND ALLOW THE ROLLER TO ROTATE IN THE HOUSING TO UNWIND THE SPRING TENSION. PULL THE TARP ALL OF THE WAY OUT. WHILE ONE PERSON HOLDS THE ROLLER IN PLACE, THE OTHER SLIDES THE TARP OUT OF THE SPLINE GROOVE ON THE ROLLER. IT’S THAT EASY AND SAFE. TO INSTALL THE NEW TARP, SLIDE THE SPLINE END OF THE TARP INTO THE SPLINE GROOVE OF THE ROLLER UNTIL THE TARP IS CENTERED ON THE ROLLER.

One of wood's inherent characteristics is that, as a natural product, it expands and contracts when exposed to varying temperature and humidity. All wood floors will move over the course of a year, and the way that a particular house handles seasonal changes will play a big part in determining how much the floor will move. Other considerations include the width of the floorboards and the species of wood.

We can add depth to the areas needing support and add rebar to strengthen the concrete for the additional load. Metal screw jacks are often used for support posts.

YES. The floor and walls are a significant source of heat loss. An insulated floor is warmer and drier; and it has direct influence on your comfort. Putting carpets on a floor only makes it feel warmer. If you have a heated floor insulation is very much necessary, as the heat loss through the floor would be higher than 50%. This heat loss is a huge and unnecessary waste of money. Return on investment for floor insulation is very quick, mainly because of the low cost of INSTA-PANELS®.

With a gym floor covering, you can hold events like dances, conferences and assemblies without fear of damaging your floor. This can also allow you to create revenue by renting your gym out for these events. If you have events that are not athletic in nature, you will save money on refinishing costs and maintenance. Furthermore, you will increase the life of your valuable hardwood floor.

The frequency varies by personal taste. I have clients that refinish their floor every year due to the amount of traffic they get. Other floors can last upwards of 10 years before the wear is noticeable.

We use floor plans along with photographs and description to locate and display information on the exact areas surveyed and from which samples are taken.

If you are placing the walk-in cooler on a cement slab that is at ground level with no basement or crawl space underneath, no insulated floor will be necessary. You will need to provide insulation either on top of, or underneath, any cooler placed over a basement, second story, or crawl space. The refrigeration will pull the heat out of the flooring, and if there is warmer air underneath condensation will form, causing damage to the floor material and space below.

Although not required, we do recommend both. The crowds are huge and we want you to make your display look as sharp as possible. We have made special arrangements with COBO for you to purchase 10x20 carpets at a reduced rate, but you MUST contact in advance for this! (Convention & Show Services

Yes. A floor protection is required for any wood fireplace, unless it already sits on a non-combustible surface. You have many choices, such as stone, brick or tile. You need to consult your owner's manual in order to know the dimensions of the floor protection specific to your model.

For the Standard (Original) model with a 32-inch shower, 7 feet, 6 inches by 6 feet, 6 inches. If you get the 36-inch shower, you'll need 7'-10" x 6'-10". For the Recessed-Sink model with a 32-inch shower, 7 feet, 11 inches by 5 feet. If you get a 36-inch shower, you'll need 8'-3" by 5'-4".

Provide a clear set-up area as close to the building as possible in a central location. This area should have free and clear access to the inside of the building. Subfloor must be broom clean and free of debris, equipment, mud, oil, wood chips and any other contaminants. Permanent wood stops should be placed around stair landings at desired thickness. No other stops or plaes should be in as the floor is continuous.