There are tools designed especially for this purpose. The Super Guide by Hyde® Tools is a metal shield that can be placed between the carpet and the baseboard allowing you to paint one section at a time. Another method is taping the carpet with masking tape or masking paper.

It’s very difficult. K&M can try to extract paint from carpet fiber, and its technicians have been successful in doing that in some cases; however, paint is very hard to get out of carpet once it dries. See similar questions...

Carpet cushion is the life of the carpet. Except for direct glue down carpet, we recommend always using carpet cushion. Be sure and check with the carpet manufacturer to find out what their cushion requirements are. See similar questions...

Regular household paint on a floor is not usually an issue, because of our unique abrasives. Zirconia cloth belts should definitely be used to remove regular household paint from a floor. The black bitumen-type paint which frequently ‘picture-frames’ floors in old houses, usually about a metre all round the edge, can be more of a challenge. However, with the zirconia abrasive, and the instructions in our book on how to get rid of it, you should get it all off. See similar questions...

Yes, if you purchase your unit(s) at our Sales Event and place the appropriate funds into escrow at that time. Following the Sales Event the Developer will make selections for all interiors of unsold units in order to maintain our construction schedule and budgets. See similar questions...

Also ask about the house and neighborhood, focusing on quality of life issues. Be sure the seller's or agent's answers are clear and complete. Ask until you understand. Making a list of questions ahead of time will help you organize your thoughts and arrange all of the information. A home scorecard can help you develop your question list. TOP... See similar questions...

Yes you can. All you need to do is provide a Radiantec mixing valve to step down the temperature of the water to the radiant circuits. You mix hot water from the boiler with return water from the floor to provide a lower temperature. See similar questions...

This is largely a design choice. If your heaters are standard height, we recommend that you order your wainscot with a base height 1-3" above the heaters. If they are tall, like older ones that are sometimes 24" tall, we recommend that you just ignore them for ordering purposes. During installation, you will just cut around them. See similar questions...

The three EcoDepots all have a recycling drop-off point. The staff will advise if the carpet is in good enough condition to be reused (if so it can be left there for no charge) - if not you can continue through to the general refuse area where a fee will be charged to dump it. If you have carpet that is old and may not be accepted at the EcoDepot for recycling then phone the TerraNova Waste Exchange and ask if they have of people that may want old carpet as a weed mat in landscaping. See similar questions...

No, the system generates low temperature heated product that works well with radiant floor heating systems, warm air heating, Solar Domestic Hot Water (SDHW) heating systems and other types of low temperature heat distribution systems. See similar questions...

Rooms are painted by our facilities personnel. If you believe your room needs to be painted, please make a request through your building’s resident director to accomplish this. See similar questions...

If you have some surface source which you'd like to paint to some surface destination at position (x, y) you would use code as follows: cairo_t *cr = cairo_create (destination); cairo_set_source_surface (cr, source, x, y); cairo_paint (cr); Note that the paint operation will copy the entire surface. See similar questions...

No. Please allow it to naturally air dry so the beneficial bacteria and enzymes have time to work all the way to the backing of the carpet. See similar questions...

Locate and repair the source of the moisture. It is best to call a professional water restoration cleaner in order to ensure all mold is eliminated. See similar questions...

Carpet should be professionally extracted & dryers setup and running within 12 to 24 hours. It’s best to use a professional that is trained in water restoration in order to ensure carpet, pad & sub-floor is completely dried within 12 to 24 hours to prevent mold. If the carpet is contaminated with sewage, it is recommended to properly dispose of carpet and pad. See similar questions...

Cut pile carpet should have a cushion that is no thicker than 7/16 of an inch and a firm cushion. Berber carpet and most commercial carpet should have a cushion no thicker than 3/8 of an inch and be a very firm cushion. See similar questions...

There is no known allergy-free floorcovering. The Carpet & Rug Institute has the IAQ program testing for chemical emissions. Look on the back of the samples for the CRI label ensuring that the carpet meets our standards for chemical emissions. For Dust and Pollen, carpet should be vacuumed at least twice a week and professionally cleaned approximately every 12 to 18 months according to manufacturer’s recommendations. See similar questions...

Several things can cause buckling, improper installation, the wrong cushion, moving furniture or high humidity. When having your carpet re-stretched, be sure all the furniture is removed from the room and the carpet is power stretched very tightly in all four directions. There are technical bulletins available on both wrinkling and restretching of carpet. See similar questions...

Flea Stoppers is a specially formulated, mini-granular, Orthoboric acid. This product is designed to fall freely to the nap of carpets where the fleas live and breed. There are many boric acid products on the market today, but don't be fooled; many are dusty and vacuum up within the first week after application. Flea Stoppers carpet Powder will not lose its effectiveness, even if vacuuming or shampooing occurs. Shampooing does not void the guarantee. See similar questions...