Though some users report significant performance improvements when using USB, there is generally no major advantage over a serial connection, assuming the PC is properly configured with no serial port IRQ conflicts or other odd problems caused by other devices such as internal modems, Palm-pilots, etc. USB has the main advantages of convenience and easy installation.

There are several available but few good ones. Do not get one that says "Serisl to PDA" adpater. They don't work. This is a tried and true good one from Keyspan: http://www.keyspan.com/products/usb/USA19HS/ available at CompUSA: http://www.compusa.com/products/product_info.asp?product_code=309975&pfp=cat3 Saeligue Corp has the FTDI chipset units that work well: http://www.saelig.com/ftdi.htm This is a very low cost unit that has worked well: http://store.yahoo.com/gomadic-new/onepiusbtors. See similar questions...

I've connected the USB to Serial adapter but it's on Com Port 5 (or higher) and your software only has Ports 1-4. This issue applies to the c\temp software only. This has been resolved with the new version of the MDAS-Pro software. If you do not have a copy of this software, please contact us. See similar questions...

Many new PCs (especially laptops) have USB ports but do not have the standard 9-pin serial ports found on older computers. This presents a problem because most of the GPS manufacturers don't make data cables that terminate with USB plugs. Unfortunately, we have noticed that the USB-Serial converters often cause computer crashes. We are working hard to resolve this problem. See similar questions...

Answer: Yes. You will need our USB connector from Agrowsoft if you with to use the USB port. You will need no additional connectors if you use a standard RS232 serial computer port. Answer: You can set up the software so that it sends text messages with both Alerts and a periodic "push" of current conditions. You specify the time interval (for example every 60 minutes). Your environments will be checking in with you rather that you having to check in on them! See similar questions...

USB to Serial Support - Use a direct/single USB to serial cable, and stay away from multi-port "hubs". Unplug the serial cable to the weather station when changing PC connections, like from serial jack to USB jack. Power down the weather station before connecting the serial cable. See similar questions...

Yes but you must purchase a USB to Serial converter. We have the IOGEAR USB to Serial Port Adapter Model GUC232A available under RIGblaster Accessories. All of the software was written for serial port control so it will not work directly with a USB port. With the USB to RS232 serial adapter you can add the function of a serial port to a computer that doesn't have one or doesn't have and extra one. See similar questions...

Nearly 95% of all computers built in the last 4 years have a USB port. Check you computers owners manual. See similar questions...

If your computer does not have a serial port, it should have multiple USB ports. Connection to the computer is via the serial to USB cable included with the MiniStation (GWS-MINI-U). This is a common perception that is definitely incorrect. When you use a serial to USB cable, you also install drivers to make that USB connection look like a standard RS232 port within your computer. Your application software will be looking for a serial port (COM1, COM2, etc.) for data input. See similar questions...

Yes, because the SignaLink doesn't require a connection to the computer's serial port! Unlike other interfaces, the SignaLink never requires a serial port connection. This is particularly handy if your computer doesn't happen to have one! In addition to simplifying your installation, this feature also reduces the likelihood of the computer's RF noise getting into your radio. It also eliminates serial port related transmit problems that plague other interfaces. See similar questions...

The serial port should be located on the back of your computer. An example of a serial port image is provided here. See similar questions...

USB means Universal Serial Bus, an external bus standard that supports data transfer rates of 12Mbps. A single USB can be used to connect up to 127 peripheral devices, such as a mouse, modem or keyboard. USB also supports Plug-and-Play installation and hot plugging. See similar questions...

The USB port is used to update Neurons Operating System as well as to load and store sound models, sounds and setups to/from external mass storage devices or computer networks. You may use it with external hard drives, CDR/CDRW drives or memory-stick type of storage devices. You may also use it to maintain a permanent connection to your computer (PC or Mac) for sequencing, editing and backup/storage. See similar questions...

The Neo1973 will have mini-USB-B. It will NOT be USB On-The-Go. OTG is a complex specification, and it comprises way more than just a AB socket, but also electrical and software components which cannot be provide by the S3C2410. You will need a special Mini-B to regular-B cable. (Can someone specify what the "special" requirement is? How is this different from a standared Mini-B to regular-B cable?) See similar questions...

Connecting the digitizer with Serial (RS232) or USB will be determined by the application software you are using with the digitizer. Please consult your application support for assistance. See similar questions...

A#8.15: This is usually caused by serial port configuration problems. Common symptoms may be: % copycat .ttyco .ttya Error opening tty .ttya, aborting. or % /usr/sbin/getty 8bit.38400 .ttya getty: .ttya: I/O error The first thing to check is that the following GNO serial port drivers exist: /dev/modem /dev/printer Next, ensure the following two lines are in your /etc/tty.config file, and that they are uncommented: modem 2 .ttya printer 1 . See similar questions...

Yes, if you are a current member of the Sequencher Maintenance Program. Just contact us at support@genecodes.com, quoting your registration number. If you have allowed your maintenance program to lapse, it is possible to rejoin the plan with full benefits and receive the latest version of Sequencher. The cost of rejoining varies based on how long you have been off of maintenance, but it costs much less than purchasing a new license. See similar questions...

The V.24 serial interface is quite simply best suited for this application. Its connection cable can be extended to almost any length and does not produce long-wave interference. USB has a maximum cable length of 8 metres and high interference levels. The same goes for other interface types. This is simply not true. See previous question. There may be radio clocks for which this applies; for the NeoClock it is not true. This is also not true. See similar questions...