No. Generally, water softeners can use either. With potassium chloride, you will use more material than with salt. Is it true that salt kills bacteria? I do not want the level of "good" bacteria in my septic system to be affected. VERY high concentrations of salt can kill some bacteria. However, the concentration of salt that is used in a softener is NEVER high enough to kill bacteria in septic systems.

Yes. Any CUNO water softener may use either Potassium or Sodium Chloride as a re-generant without changing settings. This is of special interest to anyone on a sodium-free or low sodium diet.

Yes. Potassium chloride can be used in place of water softener salt, though you may have to adjust the fill time. As a result more potassium chloride may have to be used than salt. Potassium chloride is generally more expensive than salt. Call 1-866-725-9662 for advice.

Our standard installation is quick and unobtrusive. Once installed, you can forget about it except for adding salt as required. In most cases our standard domestic installation method is suitable for most households. If there are any difficulties we can advise you about this when we carry out the survey. But rest assured ... we usually have a way to get round any problems.

The most common water softening method is called "ion exchange.” Put simply, this type of softening is a process where calcium and magnesium (the minerals that make water hard) ions are exchanged for sodium ions. This exchange takes place in a "resin bed" made up of a tiny bead-like material. The beads have a negative charge and attract and hold positively charged ions such as sodium.

A water softener removes calcium, magnesium, lime, and iron from supply water. By removing these minerals, you eliminate buildup in pipes, on fixtures, and in your RV water heater.

Depends on your water usage and hardness level. In a typical household it will regenerate every 2-7 days.

Although the small size of the individual pixels in CCD, CMOS, and Live-MOS image sensors enables them to capture even more detail than film, the sensitivity of the sensor elements is highly directional. That is, they respond best to light that strikes the elements straight on. With lenses designed for use with film, the light rays passing through the periphery of the lens strike the image sensor at an angle, and this tends to degrade picture quality at the periphery of the image area.

Water softeners work on the principle of "ion exchange". "Ions" are electircally charged atoms or groups of atoms. Tiny beads of plastic (called resin) inside a water softener mineral tank are surrounded by ions of sodium or potassium which have a weak magnetic attraction to the resin. Calcium and/or magnesium ions (hardness) have a stronger magnetic attraction to the resin than the sodium or potassium.

It all depends on the hardness of the raw water. The following table shows the additional amount of sodium consumed by drinking one quart of softened water.

A water softener simply exchanges hardness ions (calcium and magnesium) with sodium ions. This process is called ion exchange. This exchange takes place within the media (resin) tank. When water flow through the tank it comes in contact with small resin beads that are covered with sodium ions. As the water flows by the sodium ions they are exchanged with hardness ions. Eventually the beads contain nothing but calcium and magnesium and no sodium.

Yes. Many of those types of products have the indexing term "one hand" attached to them. To find all such products, use the search box and search on one hand. Yes. Click on Products, then on Computers, and then on Software. Scroll down to and click on Motor Disability Access and choose voice input program. This gets all the programs of this kind we have listed. The information for each individual product includes its price if the company provided it.

Normal regeneration time is 2 hours. It normally takes place at night time (2:00AM0 when water usage is at a minimum. For a model S100ME (30,000-grain model) 30 gallons of water & 6 lbs of salt are used per regeneration at factory setting.

The electronic controller is programmed to know the water softener’s capacity. It uses the softener capacity, the hardness setting and the water usage from the meter to continuously adjust to the customer’s water using habits. The electronic controller is searching for a water usage pattern and may seem to regenerate more frequently or not enough for the first few weeks of installation.

Water softener systems are not designed to improve the healthfulness of water, but rather to decrease dissolved minerals and reduce scaling of pipes and appliances. These systems typically use sodium charged exchange media that releases small amounts of sodium ions and removes minerals such as calcium, magnesium, and iron. Filtration systems are designed to specifically remove harmful contaminants and leave in the natural minerals.

The effectiveness of KI as a specific blocker of thyroid radioiodine uptake is well established. When administered in the recommended dose, KI is effective in reducing the risk of thyroid cancer in individuals or populations at risk for inhalation or ingestion of radioiodines. KI floods the thyroid with non-radioactive iodine and prevents the uptake of the radioactive molecules, which are subsequently excreted in the urine.