We provide nearly all of the professional grade tools necessary for you to correctly install the security film yourself. The only thing you will need is distilled water, a measuring tape, a cutting surface and a straight edge. See the Installation Instructions for more information.

Basically, you will need tools to clean the glass, cut the film, squeegee the film and spray the soap and water solution. We offer basic and deluxe tool packages for both automotive and commercial / residential Common window washing solutions may be used to clean the films, along with a soft cotton rag such as an old T-shirt. Avoid any abrasive cleansers or towels.

Yes, you can. We provide detailed measuring instructions for determining the amount of window security film you should order, a fast and easy ordering process via this website, and detailed installation instructions for installing security film on your windows. Security film is installed on the inside surface of your existing windows. On interior windows, the security film is installed opposite the strike or impact side so that it can absorb the force of the blow.

No. All window tint, decals, signs, and stickers must be removed prior to installation. The security film must be applied directly to the bare glass surface.

Installing window film is one of the easiest do-it-yourself projects there is. All of our films are self adhesive and are applied with a simple mixture of water and baby shampoo (one teaspoon to a quart of water). There is no sticky residue, no messy clean-up and no extraordinary skill involved.

Security film can be used on any glass that is vulnerable to windborne debris or smash and grab thieves. This includes your home, office, or storefront windows, display cases, and automobiles.

VISTA solves the problems of fading and glare, and damage to furniture. Most importantly it helps make occupants feel more comfortable in the room.

Window film is a microthin film composed of polyester and metallized coatings bonded by adhesives that is installed onto glass surfaces to provide significant solar protection. It screens out heat, blocks out 99% of the sun’s damaging ultraviolet rays and deflects glare while allowing natural sunlight to pass through. It can turn regular glass into safety glass by increasing strength up to 300%.

No, 3M? Sun Control Window Films? Window Films require professional application; our authorized 3M? Sun Control Window Films? Window Film Dealer/Applicators are thoroughly trained and experienced in performing high quality work. In this way, our customers will enjoy the benefits of 3M? Sun Control Window Films? Window Films and have the comfort of the 3M? Sun Control Window Films? warranty.

NONE. No tools needed . We have designed our garage screen for simple installation. No long complicated instructions. It is easy as 1,2,3 GUARANTEED! No problem. Our screens were carefully designed to accommodate most standard door sizes. We designed our screens to be flexible enough to fit openings that may be a few inches shorter or narrower.

You will need regular carpentry tools plus a hot knife and expanding foam. A hot knife is a tool for holing out grooves in the EPS, and is needed whenever SIPs must be cut to size. Hot knives are easy to use and can be purchased or rented from Thermapan. Expanding foam is used to seal all connections between individual SIPs and top and bottom plates thus ensuring the structural integrity of the system. For a full list of SIP tools that Thermapan can supply, visit our Accessories page.

The tools you will need to install your door include: jig saw, drill with 1/8", 1/4", and 1/2" drill bits, screwdriver, wire cutters, long nail and pencil. There are some other tools that aren't necessary, but a good idea: ruler, bubble level, and a carpenter's square.

You will need a tape measure, a level, screws, screwdriver and a drill. If you need to cut the panel, a hacksaw will be necessary.

Usually, the only tool required is a screwdriver for removing the CPU cover. On some systems a thumbscrew simply needs to be loosened to remove the cover, eliminating the need for a screwdriver altogether.

Installation requires that you have a screwdriver. If you have a small drill, a couple of drill bits, and a pocket or other sharp knife you can easily install the rust protection unit.

Measuring is easy - you can do it. All you need to do is complete our Measuring Worksheet and you will instantly know how much window security film to purchase.

This is difficult to answer with any degree of certainty because it is difficult to test for this. Window glass varies in strength from piece to piece, and lot to lot. So, if a 3M? Safety and Security Window Films? protected window were impacted, yet, failed to break, it would be difficult to determine if the glass alone, the film alone, or the film and glass together resisted the breakage.

No. 3M™ Scotchtint™ Window Films require professional application. Our authorized 3M™ Scotchtint™ Window Film Dealer/Applicators are thoroughly trained and experienced in performing high quality work. In this way, our customers will enjoy the benefits of 3M™ Scotchtint™ Window Films and have the comfort of the 3M™ Scotchtint™ warranty.

No, 3M™ Scotchtint™ Window Films require professional application; our authorized 3M™ Scotchtint™ Window Film Dealer/Applicators are thoroughly trained and experienced in performing high quality work. In this way, our customers will enjoy the benefits of 3M™ Scotchtint™ Window Films and have the comfort of the 3M™ Scotchtint™ warranty.