Yes, by using Network Address Translation/DHCP, you may connect multiple computers to your DSL connection by using a built-in or an external hub. If you leave the NAT and DHCP on, (with LAN address set to 192.168.0.1 netmask 255.255.255.0), you should be able to get IP address dynamically assigned to all computers without trouble. Check out Qwest's DSL LAN set-up page and see the note about security and support above. Please read the Zhonka Terms of Service before embarking on such an activity.

Network connection speed at your server is one of the biggest factors affecting your performance. If your server is connected via an ISDN line it will likely perform worse than a comparable server connected via T1 line.

You should try increasing the switch time using "multinet changeparams -switch ". Also make sure the wireless zero config is turned off, and you are able to connect to the network. A way to check for connectivity is by following these steps. Firstly, turn off the MultiNet service, using "net stop MultiNetService". Then, turn on Wireless Zero Configuration, and try connecting to your network. Once you are done testing, turn off Zero Configuration, and turn on the MultiNet service.

Mbps refers to Megabits Per Seconds. It is an indicator of the transfer speed of the service, but it does not relate to service latency.

Yes, you can place calls inside your local area network provided it runs with the TCP/IP protocol. Just open DharmaPhone, select 'Call/Address...' and type the address of the machine you want to call.

A wireless LAN, SeneNET, is a network that allows access to the Seneca College network and Internet without the need of any wired connections. Wireless network information is transmitted over radio frequencies to connect laptops or PDAs to an Ethernet LAN. SeneNET wireless network is based on the IEEE 802.11b standard.

Certainly. Check out our Customized Networks page for more information about the networking services Webjogger can provide you. Or, give us a call. We’d be happy to discuss your particular needs and let you know how we can help.

In addition to the residential, single user, standalone version of Hyperconnections WebSpeeder described above, there is also a Local Area Network (LAN) based version available. The LAN version was designed to support from 3-to-249 users and meet the needs of the Home LAN user, the Small Office Home Office (SoHo) user and the Small and Medium Enterprise (SME) business user. The LAN version runs on a single gateway machine and will accelerate web traffic for all the users on the LAN.

WORKMATE has been designed specifically for use on a Local Area Network. In a single user or simple LAN environment all the WORKMATE files are stored in a single directory. The default is "C:\Program Files\Saturn Network Services Ltd\WORKMATE Vn2". For network use there are three directories that can optionally be set up. The Program files directory, which would normally be shared and read only, contains the programs, help files, DLLs, tips and fonts.

Intermittent connectivity can be the sign of a faulty internet connection, limitations imposed by your ISP, or errors caused by any hardware/software applications connected with your internet connection, such as driver incompatibilities, old hardware, a slow/overloaded ISP or many other possibilities. Also, if you get disconnected from the Gnutella network, it will have no impact on your downloads already in progress.

Mbps is a measurement used to calculate transfer speed. Mbps stands for Megabits per second. A sustained transfer rate of 1 Megabit per second over a period of one month would total approximately 300GB (Gigabytes) of total transfer. Since transfer rates are averaged, if half the time the transfer rate was .5 Mbps, then half the time was 1.5 Mbps, the average would still be 1Mbps, and the total amount of information transferred would still average out to be the same.

Since our focus as a company is high performance data service, we do not provide telnet or dial in access to user accounts or to the Internet in general (this allows us to keep our technical and administrative resources focused on serving your data in the most efficient and timely manner possible). It is therefore necessary to obtain access to the Internet from an Internet Service Provider or on-line service in order to take advantage of WebCom services.

It is anticipated that any given institution will require the coordination of multiple services to successfully perform stipulated research. This is in addition to the internal interaction required between relevant divisions of Medicine. For example, some institutions will include participation of multiple clinical centers to gain the required number of potential participants. Others may need to work with affiliated practices or groups to assure an adequate patient participation.

Certain Micron motherboards have a non-conforming PCI BIOS implementation that does not configure PCI devices at the addresses reported. This causes grief when FreeBSD boots. More information on this problem is available at URL: http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html#micron Yes. SMP is not enabled in the GENERIC kernel, so you must recompile your kernel to enable SMP. Take a look at /sys/i386/conf/LINT to learn what options to put in your kernel config file.

I operate under a no-domain scenario. I have one or more of these clarifications to make. Please help.

Unfortunately, we cannot assist with sourcing the products we sell in your area. As we're just a single-store retailer of the goods we sell and not the manufacturer of anything, we honestly have no idea what other stores carry the same goods outside of our territory here in the Milwaukee area.

CMS-Pro, ARM-Pro and CARM-Pro are native Windows? 32-bit applications that run in Windows 2000 or Windows XP with the latest service packs applied to the operating system and all prerequisite Microsoft products. Customers who are managing about 500 delinquent accounts on a daily basis should allow approximately 3 gigabytes of hard disk space during their first five years of using CARM-Pro.

k connections are the most common connection. All of Fourway's primary modems support this. It is important to understand just what 56k means. If a 56k connection is working perfectly, you could expect download speeds of 53k & upload speeds of 33.6k. Unfortunately it is unusual to connect at the optimum speeds. Several things could contribute to connecting at lower rates. The phone line is the most common reason for slower connection speeds.