The pipe should be a minimum of 1 ?" ID when using a size 1 purge unit. The bigger the ID of the pipe the better it is for creating the proper flow.

We now use a universal polished aluminum mounting clamp that will fit towers from 1 7/8"- 2.5" in diameter using the supplied rubber liners. Additional rubber strips can be used for towers smaller than 1 7/8". Our customers have also used PVC piping cut in half and installed around the tower to make the tower mounting diameter larger in order for the clamps to fit properly.

Sorry, no we do not. We do light modification work (ie...holes and cutouts) to standard enclosures. Please link to our catalog page covering this subject (in Adobe reader PDF format).

even higher level of security is an enclosure. These are used in very high risk locations or to prevent any access to the computer or its drives. A steel enclosure is bolted to a secure surface, the CPU is inserted and connected and the front of the enclosure is locked. Steel enclosures are available in a variety of sizes and configuration; please call us for further information.

We have installed approximately 500 screens during our first year and expect to exceed 800 in our second.

In it’s relaxed state, the Cuddle Ewe Underquilt will measure smaller than the fabric dimensions. When measuring the Cuddle Ewe Underquilt, the fabric should be pulled tight and measured from seam-to-seam. The dimensions of the fabric are: When placed and centered on the mattress, the Cuddle Ewe Underquilt will NOT completely cover the mattress. There will be about 2” of mattress showing all the way around the Cuddle Ewe.

Gift messages are printed on each package label going to an address other than the buyer’s. Unless you request a special message, it will read “A Gift from: your name.” Each gift package comes with an insert telling about our cheese and a magnet.

The enclosures vary in size, ranging from a 1/3 of an acre to 2.7 acres depending on the number of animals and the lay of the land. Most animals are housed in mated pairs, so their enclosures are approximately ½ an acre. Pre-release enclosures are an acre each, and our largest enclosure which is utilized for family groups is 2.7 acres.

Send an e-mail to Questions letting us know that you do not wish to receive these. Our Marketing Department can have them removed.

It is primarily a matter of taste, skill, tooling availability and budget. Box enclosures are easier to make, require fewer tools, and mount nicely on stands. Pedestal enclosures have the same acoustic properties, but are visually more pleasing (to most people). The require greater woodworking skill, additional wood and more tools. Either style can be made with hardwood or MDF.

Due to the increasing emphasis on pollution of various kinds affecting citizens it has become mandatory in most major cities for all new genset installations to be provided with some kind of noise reducing systems. This can be either achieved by providing acoustic treatment to the walls of the DG room or by installation of an Acoustic Enclosure over the Genset. Both options are available and the feasibility at each location has to be checked and the best option selected.

Yes, we can customize our enclosures to fit your specific application. We offer our enclosures with or without clamps, terminals, mounting holes, etc. We offer custom paint and even custom gelcoat colors! Some restrictions apply.

Our Cascata range comes with tray, including the walk-in and steam showers. The Supernova and Glassline ranges do not come with trays, but suitable trays are listed in the extras section underneath each enclosure. Alternatively choose a tray from our shower trays page

In order to meet OSHA, ANSI and common sense standards, anywhere a person can come in contact with the lift, an 8' high enclosure is required. Where the lift is to be loaded, a gate with an interlock is required.

This driver will perform well in virtually any type of box. We have had excellent reports from customers who have mounted them in in everything from a flower pot to a full horn. There are examples on the web of enclosures made entirely of aluminium. We cannot supply designs for all the options as these are virtually unlimited. We have therefore chosen a range of designs which are well within the practical capabilities of most DIY individuals and give excellent results.

FG Wilson produce both open sets and canopied sets - if your generator is being installed outdoors we would recommend that you buy a canopied set. This means that you would not need to build an enclosure around it. Generator sets require an air supply that can circulate to cool such components as the engine. There needs to be a continuous circulation of air when the generator is functioning and this may be unlikely in a home built enclosure.

No, SoundSplinter is currently a subwoofer driver specialist only and does not carry pre-fabricated enclosures or amplifiers. However, we do provide recommendations for the basic enclosure constraints that should be implemented with each of our drivers, linked on each series' main product page.

How to Build Enclosures for Reptiles” discusses a range of materials and gives advice which ones suit different needs. The weight of the snake or lizard cage will depend largely on the material you construct it from. “How to Build Enclosures for Reptiles” also gives tips on dealing with heavy lizard or snake cages.

How to Build an Iguana Cage” creates iguana cages that are especially lightweight. The construction methods and years of design work ensure their strength and durability. They are suitable for both indoor and outdoor use. There are a range of material you can use for different parts of the iguana cage but all of these are lightwieght and allow the cages to be easily moved if required.