C-12, C-14, and VP Red work very well with synthetic or petroleum based oils. However, bean oils will tend to separate below 35 degrees F. in fuels with a specific gravity of less than .730.

Please do NOT use "Premix" type oil in oil-injected motors! Premix oil tends to deteriorate the rubber components in an oil injector system causing them to leak. There are a number of different brands of 2-stroke oil on the market, and some of them can be used either as "Premix" oil or "Injector" oil. Just make sure that the oil you use is suitable for use in Oil Injected Motors.

Since these engines have no sump to hold oil for engine lubrication, like nitro, the oil comes from the fuel. You need to mix your pump gas with a specific amount of 2-stroke oil, in order to provide the engine with the lubrication (and cooling) that it needs. What oil? Well, there are many topics about this, but the key here is to get a good performance 2-stroke oil.

This is a special oil that is matched to the refrigerant type, these oils must not be mixed, no other oil should be used in Air conditioning systems.

Peanut oil has been used by the Chinese for hundreds of years because of its high oil content and because it can be extracted easily by a primitive process. In recent years, other vegetable oils have become increasingly popular in Chinese kitchens. Polyunsaturated vegetable oils, such as corn, soybean, cottonseed and sunflower oil, are being used.

A Saffola Oil is an all purpose cooking oil. Its light, clear color and mild, delicate flavor make it excellent for salads, sauteing, and baking. And because Saffola Oil is high in monounsaturates, it is extremely heat stable, excellent for frying, and can be used in place of any cooking oil.

For your 2-stroke outboard, be sure and use only 2-cycle outboard oil, with an NMMA (National Marine Manufacturers Association) certified rating of TCW3. Never, never, never use automobile oil in your 2-stroke outboard. You can find Tohatsu 2-stroke outboard motor oil at your local dealer. TLDI outboards should only be run using TCW3 oil specifically formulated for use in Direct Injection motors. Standard TCW3 oil is not recommended for use in TLDI outboards.

Absolutely. In fact, we will warranty any 2-cycle engine that Cutters Edge Synthetic 2-cycle oil is used in against any oil-related engine failure. Edge Industries, Inc. warrants that the use of its lubricants will not cause mechanical damage to any mechanically sound equipment when used in full compliance with the company's recommendations and instructions.

With the exception of our outboards which have oil injection systems, Tohatsu 2-stroke outboards require a 50:1 (2.5 ounces of oil for each gallon of gas) oil/gas mixture after the initial break-in period. Tohatsu outboards which have oil injection will automatically mix the correct amount of oil and gas depending on the engine requirements; you don't have to pre-mix your oil & gas with these systems. We've put together a handy chart to help you calculate the amount of oil/gas to mix.

With the exception of our outboards which have oil injection systems, Nissan 2-stroke outboards require a 50:1 (2.5 ounces of oil for each gallon of gas) oil/gas mixture after the initial break-in period. Nissan outboards which have oil injection will automatically mix the correct amount of oil and gas depending on the engine requirements; you don't have to pre-mix your oil & gas with these systems. We've put together a handy chart to help you calculate the amount of oil/gas to mix.

For your 2-stroke outboard, be sure and use only 2-cycle outboard oil, with an NMMA (National Marine Manufacturers Association) certified rating of TCW3. Never, never, never use automobile oil in your 2-stroke outboard. You can find Nissan 2-stroke outboard motor oil at your local dealer. TLDI outboards should only be run using TCW3 oil specifically formulated for use in Direct Injection motors. Standard TCW3 oil is not recommended for use in TLDI outboards.

Traditionally, a vegetable oil, palmolein oil, has been used to manufacture most of our products. Palmolein is a vegetable oil extracted from the fruit of the palm tree. Recently, we have started to use high oleic sunflower oil for some of our products. High oleic sunflower oil is a special type of sunflower oil that has been designed for frying foods. It is lower in saturated fat than palmolein oil and high in monounsaturated fat.

Gas central heating, supplied by British Gas in most flats and houses, few flats have electric heating.

For your oil-bath gearbox, we recommend 85W-140 gear oil. For the older grease lubricated gearbox, we recommend Exxon Unirex N2 grease.

Gas central heating, supplied by British Gas in most flats and houses, few flats have electric heating!

Just normal immersion oil is fine, but also alcohol and even water can be used. Most of the digital instruments work with polarized lenses and there is no need for immersion oil.