The hot water that comes from the 600 ft. well is about 160? F. If the water were allowed to come to the surface, the temperature would be 135?.

You were smart to let me handle this.... God knows what would happen if you tried to experiment with ice cubes on your own."[read on]

Yes -- a general explanation: Hot water can in fact freeze faster than cold water for a wide range of experimental conditions..[read on] The FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES says " Hot Water freezes faster, yes, it really does." But if you don't trust my resources go to the library and check out these publications(all of the resources I found online sited these articles):

Yes, it is okay to use hot water to wash your Fuzzi Bunz, even on the hottest setting. However, keep in mind that you should dry your diapers on a low setting in your dryer.

The hot water contains calcium, magnesium, sodium, potassium, iron, mangnesium, silica, chloride, fluoride, lithium and other chemicals. Most "smelly" hot springs have a high sulfur content. The sulfur content of Fairmont's hot springs is very low. For a detailed water analysis, contact the Executive Office.

Specifics pertaining to availability of hot water will be included in participants' placement details.

If you have cold water and no hot water, there is water to the property and the problem is with your hot water heater. You may want to check the valve on the hot water tank or check to see if the circuit breaker has tripped. If you have no water, neither hot nor cold, our Customer Service Center can check to see if there is an outage in your area. Their number is 645-8270. Representatives are available to take your call Monday through Friday 7:00 a.m. to 6:00 p.m.

Natural corrosive properties of all waters will eventually cause the unit to fail. The time it takes to have the heater fail depends on the minerals in the water and how hard the water is. We partially soften the water to reduce corrosion in the water mains, hot water heaters and in household plumbing.

Yes, just like all other cosmetology salons, the mobile salon must have hot and cold running water at all times. TDLR does not require any other license to own a mobile cosmetology salon; however, any one considering a mobile cosmetology salon should research the cities in which they intend to offer services to find out whether they would need any additional type of city permit to offer services there.

This is one of those things that seems difficult, but is actually very easy. First you need a source of water; either hook up to the city water connection or fill the on board water tanks and turn on the pump. Now comes the hard part, just open the hot water faucet. The water entering from the water source you selected will displace the air in the HWH and begin to fill. At first air will be expelled from the faucet, then it will spurt water and finally a full stream of water.

there are several manufacturers of hot water heaters (HWH), read and understand you owners manual. The first thing I want to say is when lighting the HWH it takes a LONG time holding down the pilot button to get gas flow all the way to the HWH. Turn the HWH gas valve knob to the "Pilot" position, then push this knob in. Gas will NOT flow unless you are holding this down. It is a safety thing. Wait at least 1 minute, usually 2 and gas will begin to flow. Now try to light it.

Most of our families are middle or upper class. They have comfortable homes with hot water. However most homes do not have air conditioning or heating. Most of the time you do not need it, except in the case of Peru, where we recommend wearing thermals or flannel PJs to bed!

Hot water is more likely to contain iron, copper and lead from your household plumbing and water heater because these contaminants generally dissolve faster into hot water than cold water. Therefore you should only use cold water for cooking.