You can run a scan of your computer at Symantec. If you are running a firewall, be forwarned you will get alerts generated by this.

On the SRB server server-side, you must open the port that the srbMaster is listening on, plus a set of 100 or so configurable data ports (described below). The srbMaster listens on the port defined in srb.h or specified in srbPort environment variable (often set in the runsrb script). By default, srb.h has DefaultPort "5544" but this can be changed via the configure --enable-srbport=value option. See similar questions...

Port 80 (http) is used for most communications with the project servers. Port 443 (https) is used if the password is being exchanged . Ports 1043 and 31416 are used for local control as well as for remote control of a BOINC client. 1043 is preferred and 31416 is a fall back. Unless you are RPC'ing over the Internet don't open 1043 and 31416 in your non-local firewall specifically for BOINC. See similar questions...

You need to be able to establish outgoing connections on ports 4038 and 4039. For optimal performance, you need both incoming and outgoing connectivity on port 4137. You may not change the ports that BitWise uses. Allowing different ports would substantially detract from the ease of communication among BitWise users. See similar questions...

If you have questions regarding the compatibility of your router with your new VoIP service you should contact the router manufacturer directly. Some of the most common manufacturers' tech support numbers and web sites are listed below. If you do not see your router manufacturer's information listed above, please refer to their website for further information. Most likely the VoIP device you received is not registered with PhoneOverNet. See similar questions...

ScarletPage communicates with the Server using web services. This allows us to use the HTTP ports. Therefore, the only ports required to be open are 80 and 443 outbound. See similar questions...

No. PocketVPNs proprietary protocol tunnels over HTTP or HTTPS, and can even be installed on the same server as other network asset such as Microsoft Exchange Front-end. If you are using BES then PocketVPN doesn't even need to be accessible from the Internet. See similar questions...

The main port used by P2P-Radio is the port 2000 (UDP & TCP). This port must be accessible from the Internet. The port 2001 (TCP) is used for communicating with your media player. P2P-Radio only accepts connections from the local machine on this port. Connection requests from the Internet will be rejected. A web page with detailed information is available on port 2002 (TCP). You may also make this port accessible from the Internet. See similar questions...

No, but port 2641 is the ICANN registered handle port. You may choose which ports you would like your handle server to run on during the installation (Simple Setup) but remember that no other processes, i.e., a web server, can be running on the same ports as your handle server. Yes, the handle server uses its own ports. You will need to re-run the Simple Setup again to make the change. This not only creates the sitebndl.zip file that the handle administrator uses, but also the config. See similar questions...

By default the VNC server will accept connections on TCP port 5901. Under the Linux environment, you can start multiple sessions at once, so the number will increase with each VNC session, i.e. 5901, 5902, 5903, etc... See similar questions...

No ports to open, no protocols to worry about. Using E-Z Audit is akin to putting Notepad on your server and having a user launch it at their PC to type "Hello World." and saving that plain text file. Yes. Unlike some other products, no data is sent to us nor stored anywhere but on your network or PCs. See similar questions...

The host will need to have TCP port 47624 open. Other players joining the game will need to open their TCP ports 2200-2400 and UDP ports 2200-2400. See similar questions...

Answer: No one who has installed Shorewall using one of the Quick Start Guides should have to ask this question. Regardless of which guide you used, all outbound communcation is open by default. So you do not need to 'open ports' for output. See similar questions...

To address vulnerable applications, FireWall-1 can be set up to allow inbound connections of a particular service only to a specific server that has been enhanced to handle possible failures. For example, all inbound SMTP traffic can be directed to a server running an enhanced version of sendmail. By providing such an open solution, the administrator can always acquire the latest and best application for any desired platform. FireWall-1 introduces practically no performance degradation. See similar questions...

The B-LinkU has two active ports but it is possible to connect to either port using the U interface or the S/T interface. Two bearer (B) channels are available on each of the two ports. See similar questions...

The ports listed above are the default Gong settings. The ports can be changed by editing the gong.ini (for the client) and gongserver.ini (for the server) files. If there is a firewall between your computer and the Gong server which blocks any of these ports then Gong won't work properly. If you use some kind of login authentication system with Gong such as CAS authentication, then that process will use a special port not mentioned above in order to perform the authentication). See similar questions...

The ports used are configurable. For SIP signaling it uses 5 ports: the base port configured the four consecutive ports. All devices should be configured to use base port. Regarding media ports or RTP ports a range is configured, the number of ports in the range must be at least twice the number of concurrent calls you plan to have. See similar questions...

Asthma can be controlled...You can do it! When you know how to control asthma, it no longer controls you. See similar questions...