If you can use a level, a tape measure, a post hole digger and a string line- and are willing to take the time to do the job right- you can do the job yourself. USAVinyl supplies written instructions and has phone support!

Vinyl is simple to install. First make sure you have a reference point for placement of the graphic. Use a wax and grease remover to clean the area very well for proper adhesion. Place the graphic on the location to be installed and gently slide around until you have it in the proper location. When you peal the tack sheet off make sure you use a very sharp angle, try to make the tack sheet parallel with the surface as you are pulling it off.

Bufftech is a proven product backed by a lifetime warranty of a 100 year old company with installations throughout the world.

Vinyl Fencing can break if subjected to a direct impact (e.g. an automobile running into a fence line). Under normal use, the fence will not break when installed properly. Planks, pickets and rails are easily replaced if damaged. [Return]

with all exterior products, the fence will become dirty when exposed to the elements. A mild detergent and water should be sufficient to keep your fence or deck rail looking new. For tough stains, "soft scrub" or baking soda works well. Simple Green and steel wool also works to clean stubborn stains. [Return]

All our vynal products carry a limited lifetime warranty against rottting, rust, corrosion, abnormal discoloration or weathering. All vinyl featured on this website are made from 100% virgin PVC. [Return]

Although not classified as graffiti proof, vinyl fencing is fairly easy to clean and most graffiti comes off with just a little effort. Often, the graffiti can be removed with "simple green" detergent and a soft cloth. In more severe cases, use 0000 steel wool (super fine), either by itself, or with "simple green" or in extreme cases, use with lacquer thinner, and dry with a soft cloth quickly afterwards.

Yes, we send a detailed installation manual with every shipment, and provide technical assistance over the telephone. Following the installation manual will ensure warranty certification upon completion.

If you need less than a full fence section, simply cut the rails to the size you need with a Hacksaw, Sawzall, or Jig saw. Click here for theinstallation instructions.

Polyvinyl products are engineered to retain their beauty and good looks throughout their lifetime. The only reason to use paints on our PolyVinyl products would be to change the color of the product. We do not recommend painting polyvinyl. There are paints that are available to paint vinyl but painting or otherwise treating Digger Specialties, Inc. PolyVinyl products voids the Transferable Lifetime Limited Warranty.

Actually Vinyl Fence is not more expensive then wood. Although your investment is more initially, this is where your expense ends. The cost difference is quickly eliminated once the substantial cost of maintenance and repair of a wood fence is considered. Vinyl is the most economical way to go, confidently saving you money year after year backed by their lifetime transferable warranty!

Vinyl fences are designed to withstand normal wind load. The amount of load is dependent on the installation of the posts and horizontal rails. If installed according to Homestead's specifications, the fences are desinged to stand up to normal wind load. [Return] It is normal for vinyl materials to expand and contract during temperature changes. Your contractor will allow for expansion and contraction during the installation process. [Return]

The items required to install vinyl letters are masking tape, household cleaner (for clearing the surface), and a squeegee (which is provided with your order). See our Letter Application and Removal web page for instructions.

Installations such as walls less than 1 metre in height, fences and hedges do not require a permit but must respect certain standards. For more information, contact the (Permits Department) Service des permis at 450.698.3260.

When the grade of the property follows a slope a decision must be made on the method of installation. It will affect the type of posts that need to be ordered, if they are pre-routed to accept rails. A line post has pre-routed holes on two sides opposite each other and the holes line up with each other so panels can be installed level to each other. On level ground this is fine. If panels are to be "raked", these posts will work also.

The fence will come with full installation instructions. With basic tools and a little handyman experience you will be able to easily install our fence. For those who are scared by the mere mention of the word instructions, we do have recommended installers in most areas.

Your user agent does not support frames or is currently configured not to display frames. However, you may visit the related document.]