You might have to change the CCFLAGS field from '-I/usr/local/ssl/include/openssl' to point to wherever your openssl .h's are. Also, you might need to add to LIBS the location of your openSSL libraries if they are not in the default location.

When you type 'make' to compile your code, the options supplied to the compiler are held in the file called 'Makefile' in your src/ directory. The makefile supplied with ROM is very good for showing many warnings and compiling efficient code, but you should not be afraid to look at the file. Most notably, if you create new .c files that you want to add to your mud, this needs added to the makefile. If you notice, the makefile has a section containing a list of .

The following makefile shows one way to use the Unix command make to help check LSL traits. It relies on properties of the Bourne shell under Unix and standard Unix make, so it would have to be adjusted to work on other systems. (Also, if you cut and paste this makefile, be sure to change the leading blanks to tab characters on the rule lines.) SHELL = /bin/sh LSL = lsl LSLFLAGS = .SUFFIXES: .lsl .lsl-ckd .lp .lsl.lsl-ckd: $(LSL) $(LSLFLAGS) $< 2>&1 | tee $ .lsl.

Some of these concepts were covered today (1/30/02) in lab section as well as handouts were provided (in lab section). Note that if you do not show up to lab section you will not be able to get copies of any handouts or other material provided in that lab section.

Yes, the Connect-A-Dock can be reconfigured, added to, and moved to another location. The unique connection system is very flexible, and you can reconfigure the same components into many different shapes. (i.e. T, F, L, swim platform, etc.) Different configurations may require additional float sections and/or connectors. These can be added at any time.

The following procedure readies a Falcon for use with a custom UPG program, IntelliTrack portable application, or standard PAL software. Reconfiguration should be done whenever there it is suspected that the loaded configuration or application files have become corrupt or a malfunction occurs. Usually, this is evidenced by erratic performance.

HOTSPOTZZ requires only a few simple changes to your computer. Use this table to locate instructions for your operating system and wireless LAN card. If you don't see your card or operating system here, write to our customer service team or call 1-866-776-8991. Customer Service hours are Monday - Friday 9 am to 6 pm MST.

To reconfigure the NVRAM, you first erase the Cisco 675 or 678 modem configuration and then reset the modem.

Make sure your scanner is plugged into the correct interface. Then turn to the front cover of your configuration manual and scan the following marked bar codes: "start", "set", "end". This sets the scanner back to the factory setting and keyboard wedge interface. If there are changes you need to make, such as setting the data start/end characters or using RS-232 (serial), scan those codes before scanning the "end" code.

No. It would probably be more work than it's worth to write a converter, especially since the Cons approach of building everything from a single process at the top of the directory tree differs radically from the standard recursive use of Make.

This error typically appears when your make utility doesn't understand the include directive. You may want to try using another version of make. Alternatively, you may be using the wrong version of the Makefile. Did you download the Unix version of Amulet, or the Windows 95/NT version? The Windows 95/NT version has a slightly different makefile, which uses "!include" as the include directive. You need the Unix version, which uses "include" as the include directive.

Lots are available. Look at the documentation for full lists of available bells and whistles, but commonly used additions to the c_flags are:

There is no need to change computers using private addressing. If you have a router involved in the configuration, you may have to change the IP address of either the router or the Smart IAD device in order to allow the Smart IAD to pass the voice traffic.

If all the ME users have analog phones on their desks, then it is unnecessary to do anything with the PBX. If not, it is necessary to modify the PBX configuration.

Not usually. There is typically no need to configure your network or firewall. You can install it on any PC connected to the wireless network running Microsoft Windows 2000, XP or Vista. Yes - myWIFIzone now supports wireless networks running WEP. In fact, if someone hacks your WEP key, they will still be blocked by myWIFIzone.

You can reconfigure those CPLDs but we don't recommend that you do so. The factory configuration for those CPLDs is designed to use all the pins on those devices and it is highly unlikely that you can develop a design capable of driving all of the devices on the I/O board you are using. You may be able to develop an LCD driver that could work but other devices on the I/O board would no longer work.

make reconfigure only works within the core Harvest code (the files in the src/ subdirectory) and not on any of the components. This is a bug, which will be fixed. However, a similar result can be obtained by using 'make realclean', on the next 'make' the software will be reconfigured. This section contains questions about, and solutions to, some of the problems that have been encountered when running Harvest.

Are you using an AIX machine? Remember to login only to the known AIX machines in RCS (The command uname will give you what OS you are on).

You will need to reconnect the stator leads and regulator. For generators other than 12-wire KAMAG generators, please contact the Kato factory. Please have your serial number ready.