Zolved does not require configuration of routers or firewalls. Just click on download and install the software. Click on the Zolved Icon and you are ready to connect with anyone securely. However, there may be situations where Zolved Remote Control does not work. If it does not work for you, please give us some feedback on your configuration and why you believe it may not be working. Zolved does not require configuration of routers or firewalls. Just click on download and install the software.

There is no general method that works for all firewall / router combinations. Check http://www.portforward.com/ for information, and also try "port forwarding" in Google. Some methods are listed below, but we need help with this section. (The best way to help is to contribute to the forum http://www.rejetto.com/forum/index.php?board=27.0) First, navigate to Network Connections. (Or open it in Control Panel.

If you have questions regarding the compatibility of your router with your new VoIP service you should contact the router manufacturer directly. Some of the most common manufacturers' tech support numbers and web sites are listed below. If you do not see your router manufacturer's information listed above, please refer to their website for further information. Most likely the VoIP device you received is not registered with PhoneOverNet.

Only if your firewall / router is configured to filter internal network traffic or if you will have users connect to the system from an off-site location (such as a client site, home office or laptop computer 'on the road'). A list of the firewall network ports required for Senomix Timesheets may be found in the Installation Guide. If you're using Windows XP and have that operating system's default firewall turned on, Senomix Timesheets may be blocked from communicating outside your computer.

If your server is behind a firewall or router you will need to allow the relevant ports for the FTP server through. The ports that must be configured for firewalls and routers include port 21 (standard FTP port) and port 990 (for implicit SSL). If you have changed these default port values on your FTP server then you should forward your port values instead. When FTP clients are using PASV mode for files transfers, the FTP server needs to be able to open additional ports.

If you have multiple computers, a router with NAT firewall is required to share the public IP address and protect against hackers. We use PPPoE to assign IP addresses and implement speed tiers. If you only need to connect one computer, you can connect directly to our equipment if the computer has Windows XP and an Ethernet interface. Windows XP includes a PPPoE client and a firewall. Otherwise, a device typically called a "cable/DSL router" will be required.

The Reynwood provided router is an administrative demarcation point between the Reynwood network and the customer's. It is not to be considered a firewall. Reynwood wireless broadband is an "always on" service and therefore it is recommended that you install and maintain a firewall. The firewall helps prevent unwanted and often times unknown attempts to access your computer. This is a normal situation that Reynwood has no control over.

Connect to the router through web browser. Set the broadcasting IP address and Port, select TCP-IP protocol. How to ... If you hear nothing from your broadcasting page, check the 'Tools > Internet Options > Advanced > Java (Sun) > Use JRE v1.x.x_xx for <applet>' option in MS Explorer. If there is no such option or if the JRE version is lower than 1.

Why can't I login to the router? The Internet Explorer gives me "the page can not be displayed."

This depends on the definition of firewall. Some writers (e.g., Gene Spafford in _Practical UNIX Security_) define a firewall as a host on which an ''inside'' and/or an ''outside'' application process run, with application-level code linking the two. For example, a firewall might provide FTP access to the outside world, but it would not also provide direct FTP service to the inside world.

A - Here is a list of the ports necessary to be opened for both inbound and outbound traffic thru your router or firewall. More help is available on our member message boards inside the web site. Our FSHost Services using the standard Flight Simulator Multiplayer require these ports to be open in your firewall or forwarded in your router. TOP

From the Cisco PIX command reference: fixup protocol mgcp If a user wishes to use MGCP, they will usually need to configure at least two fixup protocol commands: one for the port on which the gateway receives commands, and one for the port on which the Call Agent receives commands. Normally, a Call Agent sends commands to the default MGCP port for gateways, 2427, and a gateway sends commands to the default MGCP port for Call Agents, 2727.

Yes, if the firewall and the Router are configured properly. The client application is configured to access the Router using a) its destination host name and, b) the Listener port. The firewall must accept traffic to the Router from the client machine, and must also permit traffic to the client machine from the Router. If such traffic is restricted by the firewall, either the firewall or the Router must be reconfigured as necessary.

If you have a router like Linksys, Bay Networks, SMC, etc., you need to find out how to redirect port 8090 (or the port number you selected) to the computer with the TrackerCam. iNetCam has some information on how to do this. Use port 8090 instead of port 80. Once you set that up, start TrackerCam software, click the bottom-left arrow to open the Tool Panel. Then press the top-right button in the Tool Panel to get online. Click the IP number drop-down list.