Can I use old workstation monitor with my VGA card ?
ePanorama.net - CircuitsThere are lots of different montors around, but most of those monitors use standard analogue video interfaces so they can be connected to PC video card with only quite small modifications (correct cable and possibly some simple electronics). Nowadays the modern VGA cards are quite freely programmable devices and in most cases it is possible to make the VGA card to send out correct signals for the monitor at least in one screen resolution.
Are there other possibilities than standard VGA card to connect a workstation monitors to PC ?
ePanorama.net - CircuitsSome manufacturers make special grpahcis cards for PCs which allow PC to be succesfully used with fixed frequency monitors. Fixed Frequency Video FAQ at http://www.devo.com/video/ has more information on those cards which make is possible to use fixed frequency monitor as general purpose PC monitor.
Is old workstation monitor a practical PC display ?
ePanorama.net - CircuitsTypical old workstation monitors are not very practical PC display device because their limitations in supported scree modes. Typically it is possible to have one particular Microsoft Windows or X-windows (for Linux and Unix users) screen mode to work with that monitor, but there are many screen modes which the workstation monitor does not show.
Can I run MediaPortal properly with my old DirectX7/8 VGA-Card?
FrequentlyAskedQuestions - MediaPortal Wiki DocumentationSince MediaPortal uses VMR9 a DirectX 9 compatible videocard is required and older cards are not supported.
Can I use any vga card as a display device ?
DScaler - Frequently Asked QuestionsDScaler requires an AGP card. It is impossible to do on a PCI video card. DScaler uses massive amounts of *bidirectional* bus bandwidth: 250 megabits per second incoming bandwidth (from TV card) and about 500 megabits per second outgoing bandwidth (to videocard).
Can I use a vga monitor with my 6100?
Brd's Powermac 61xx FAQYes! In fact, I use an IBM 15" aptiva display as my 2nd monitor and am typing this on it right now. :) You can get a mac->vga adapter, and I would advise getting one that has the dip switches on it. I got a Belkin one from Compusa that was cheap, but had no switches, and it didn't work. I got another that is a Philips (Model 9AVMAC-074I), and it allows me to dial in what resolution the 15" will run at.
Can I damage the monitor or PC when I connect a workstation monitor to PC ?
ePanorama.net - CircuitsIt is possible to damage equipments when playing with PC vidoe hardware and workstation monitorts. If the monitor has standard video inputs, is workign properly, cable is properly constructed and everything is connected to properly grounded power outlet then the risk of damaging the graphics card is minimal. Some monitors can be damaged by sending wrong frequencies to them, so be sure that you send right frequencies to monitor.
Q. What is the best position for the monitor at my workstation?
Ergonomics & Computer Injury: FAQsMany make the mistake of putting the monitor, the keyboard, or both off to one side on a desk. If you perform more than a few minutes of keyboarding a day, the keyboard and monitor should be placed directly in front of your normal sitting position. The screen should be 18-30 inches from your eyes, or about an arm's length.
Q#2.3: Is GNO compatible with the SecondSight VGA card?
news.answers/apple2/GNO-faqA#2.3: Yes. GNO is completely compatible with the SecondSight card. However, GNO's console driver currently does not support the SecondSight card's VGA specific text modes. A SecondSight aware console driver is planned as a future enhancement.
How can I hook more than one monitor to my video card ?
ePanorama.net - CircuitsThe best way to do this is to purchase a commercial VGA signal splitter or video distribution amplifier. These are not cheap, but they will provide the best results. A video splitter designed for VGA or SVGA will include the proper high bandwidth video amplifiers as well as the proper cable termination and shielding. With this kind of adapter you are able to have the spae picture on two or more monitors.
Q15: How to check VGA Monitor compatibility?
faq_kvmIf the monitor display with abnormal scan lines, please connect monitor to VGA card directly to verify.
Can I use the Buz video-out to display the graphics from my VGA card?
Iomega Buz FAQThe Buz composite and S-video output connections are only for AVI playback. Specifically, they reproduce in analog video any movie file that uses the MJPEG codec for playback. The analog output will also show the incoming video during capture (loopback).
Is security a problem if I use a public workstation?
Frequently Asked QuestionsYes. If you are concerned about the security of your ILL requests, it is a good idea to EXIT from the Web browser before you leave the workstation. This prevents the Back button from accessing pages you were using.
Is it safe to use the local public library workstation for Tax Card Online?
Tax Card Online - Frequently Asked QuestionsYes, it is. However, if you use Tax Card Online with any workstation that is used by several other people, remember to delete the Page History, cache and cookie records from the browser after you have finished your session. Select Tools / Internet Options, and the General tab. Go to Cookies section and click Delete Cookies. Click OK to close. Go to Temporary Internet files in the lower part of the General tab. Click Delete files.
How old do you have to be to use the Card?
Cash 2 Charities : FAQThere are certain age requirements for the Visa Prepaid Card. For those older than 13 and under the age of 18, a parent or legal guardian may enter the Cardholder Agreement & Disclosure Statement and you can become a registered user of the Card. Your parent must be on the phone during the account activation process in order to accept the Agreement on behalf of their underage child. Some merchants will ask to see the ID of the cardholder.
How to choose the right VGA cooler that is right for your VGA card?
EVERCOOL Thermal Co., Ltd. ::One way to identify the right VGA cooler is through the distances of the various pitches. On nVidia cards, pitch distances are usually 55 mm and 80 mm opposite diagonal; on their higher cards, they usually come with four clip holes of 61 mm and 75 mm pitches opposite diagonal to each other. On ATI cards, pitch distances are usually 55 mm opposite diagonal; on their higher cards, they too come with four clip holes, and the pitches are also 61 mm and 75 mm opposite diagonal.
Do you need a good VGA cooler when overclocking VGA card?
EVERCOOL Thermal Co., Ltd. ::Definitely. Normally, a VGA cooler is tested against its original frequency. If you burn up the card after overclocking, there is usually no warranty available for the card. Therefore, overclocked VGA cards should go with efficient VGA coolers.
Should I use a heart rate monitor?
Fitness bootcamp in Arizona, Best Fitness Boot campUse of a heart rate monitor is not necessary for enrollment in Fitness Boot Camp. It is, however, an option that might improve your efficiency by exactly monitoring your effort level, leading to even greater fat loss. If you're interested in learning more, see your options here. Polar Heart Rate Monitors
How old do you have to be to use the Visa Prepaid Card?
Yellow Ribbon FoundationThere are certain age requirements for the Visa Prepaid Card. For those older than 13 and under the age of 18, a parent or legal guardian may enter the Cardholder Agreement & Disclosure Statement and you can become a registered user of the Card. Your parent must be on the phone during the account activation process in order to accept the Agreement on behalf of their underage child. Some merchants will ask to see the ID of the cardholder.
How do I use VGA graphics in Nethack?
DOS Games Frequently Asked Questions: Part of dosgames.comUsing VGA graphics in Nethack instead of the normal ASCII characters is quite simple, if you know what to do. (This info is contained within GUIDEBOO.TXT which is included with Nethack, although it's a little tough to locate.) Open up your favorite text editor (Notepad will do fine, or DOS Edit if you prefer) and open the file in your Nethack directory called "DEFAULTS.NH". (Or possibly NETHACK.CNF if you're using an old version.) The second section of the file is the "OPTIONS" section.
